8118267 FESTO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

EPCS-BS-32-50-3P-A-ST-M-H1-PLK-AA Part number: 8118267 Data sheet Feature Value Size 32 Stroke 50 mm Stroke reserve 0 mm Piston rod thread M8 Reversing backlash 100 µm Screw diameter 8 mm Spindle pitch 3 mm/U Max. angle of rotation of the piston rod +/- 1 deg Mounting position Any Piston rod end External thread Motor type Stepper motor Structural design Electric actuator with ball screw drive With integrated drive Spindle type Ball screw drive Symbol 00997294 Protection against torsion/guide With plain-bearing guide Homing Fixed stop block positive Fixed stop block, negative Reference switch Rotor position sensor Absolute encoder, single-turn Rotor position sensor measuring principle Magnetic Additional functions User interface Integrated end-position sensing Display LED Ready status indication LED Max. acceleration 1.5 m/s² Max. speed 0.079 m/s Repetition accuracy ±0.02 mm Characteristics of digital logic outputs Configurable Not galvanically isolated Duty cycle 100% Insulation protection class B Max. current of digital logic outputs 100 mA Max. current consumption 3000 mA DC nominal voltage 24 V Nominal current 3 A 5/16/22 - Subject to change - Festo SE & Co. KG 1/3

Parameterization interface IO-Link® User interface Rotor position sensor resolution 16 bit Permissible voltage fluctuations +/- 15 % Power supply, type of connection Plug Power supply, connection technology M12x1, T-coded as per EN 61076-2-111 Power supply, number of pins/wires 4 Power supply, connection pattern 00995989 Certification RCM compliance mark KC characters KC EMC CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions Vibration resistance Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27 Corrosion resistance class (CRC) 0 - No corrosion stress LABS conformity VDMA24364 zone III Storage temperature -20 °C ... 60 °C Relative air humidity 0 - 90 % Non-condensing Degree of protection IP40 Ambient temperature 0 °C ... 50 °C Note on ambient temperature Above an ambient temperature of 30°C, the power must be reduced by 2% per K. Max. torque Mx 0 Nm Max. torque My 1.5 Nm Max. torque Mz 1.5 Nm Max. radial force on actuator shaft 75 N Max. feed force Fx 150 N Guide value for payload, horizontal 24 kg Guide value for payload, vertical 12 kg Moving mass at 0 mm stroke 98 g Additional weight per 10 mm stroke 24 g Basic weight with 0 mm stroke 818 g Product weight 938 g Additional moving mass per 10 mm stroke 3.3 g Number of digital logic outputs 24 V DC 2 Number of digital logic inputs 2 Logic input specification Based on IEC 61131-2, type 1 Work range of logic input 24 V Characteristics of logic input Configurable Not galvanically isolated IO-Link®, SIO mode support Yes IO-Link®, protocol version Device V 1.1 IO-Link®, communication mode COM3 (230.4 kBd) IO-Link®, port class A IO-Link®, number of ports 1 IO-Link®, process data width OUT 2 Byte IO-Link®, process data content OUT 1 bit (move in) 1 bit (move out) 1 bit (quit error) IO-Link®, process data width IN 2 Byte 5/16/22 - Subject to change - Festo SE & Co. KG 2/3

IO-Link®, process data content IN 1 bit (state device) 1 bit (state move) 1 bit (state in) 1 bit (state out) IO-Link®, service data contents IN 32 bit force 32 bit position 32 bit speed IO-Link®, minimum cycle time 1 ms IO-Link®, data memory required 500 byte Max. cable length 15 m outputs 15 m inputs 20 m for IO-Link® operation Switching logic at outputs NPN (negative switching) PNP (positive switching) Input switching logic NPN (negative switching) PNP (positive switching) Logic interface, connection type Plug Logic interface, connection technology M12x1, A-coded as per EN 61076-2-101 Logic interface, number of poles/wires 8 Logic interface, connection pattern 00992264 Type of mounting With internal thread With accessories Note on materials RoHS-compliant Housing material Wrought aluminum alloy, smooth-anodized Piston rod material High-alloy stainless steel Spindle nut material Steel Spindle material Roller bearing steel 5/16/22 - Subject to change - Festo SE & Co. KG 3/3