8114037 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
VTOI-V8-30D3-U14-08-V-S015-1 Part number: 8114037 Data sheet Feature Value Valve function 2/2, closed, monostable Operating pressure 0 MPa ... 0.1 MPa Operating pressure 0 bar ... 1 bar Operating pressure 0 psi ... 14.5 psi Internal volume 10 µl fluid space valve 178 µl distributor block with valve, needle and fittings Nominal width 0.8 mm Nominal width of dosing needle 0.3 mm Length of dosing needle 30 mm Width dimension 9 mm Sealing principle Soft Mounting position Vertical Reset method Mechanical spring Type of control Direct Suitability for vacuum no Min. dosing volume 1 µl Note on dosing volume Depending on the configuration, environment and application Typical dosing precision ≤ 5 % tip-to-tip CV ≤ 3% intra-run CV Note on dosing precision Depending on the configuration, environment and application Max. switching frequency 4 Hz Note on switching frequency Dependent on the ambient temperature and installation state On switching time 7 ms Note on switching time on Depending on the configuration, environment and application Switching time off 2 ms Note on switching time off Depending on the configuration, environment and application Duty cycle 100% Electrical power consumption 1.8 W Nominal operating voltage DC 24 V Permissible voltage fluctuations +/- 10 % Medium Liquid media Gaseous media Information on medium Maximum particle size 20 µm Application note See application note (available on the support portal at festo.com) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 11/29/22 - Subject to change - Festo SE & Co. KG 1/2
Corrosion resistance class (CRC) 0 - No corrosion stress LABS (PWIS) conformity VDMA24364-B2-L Storage temperature 5 °C ... 40 °C Temperature of medium 5 °C ... 50 °C Degree of protection IP30 Note on degree of protection In mounted state Ambient temperature 5 °C ... 40 °C Product weight 52 g Electrical connection 2-wire 2x single wires Open end Cable length 0.15 m Wire ends Stripped Nominal conductor cross section AWG28 Type of mounting With through-hole for M3 screw Fluid connector Internal thread 1/4-28 UNF-2B Note on fluid connector Fitting enclosed for pneumatic tubing with 3 mm outside diameter Material of dosing needle High-alloy stainless steel Material number for dosing needle 1.4404 Note on materials RoHS-compliant Materials in contact with the media ETFE FPM PEI PPS High-alloy stainless steel Actuation type Electrical Nominal altitude of use above sea level <= 2000 m NHN Relative air humidity 0 - 95 % Non-condensing 11/29/22 - Subject to change - Festo SE & Co. KG 2/2