81080-600C07

810 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 8

Technical content

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series

• Tripolarized for robust alignment when mating to 820 series socket
• 50 mil × 100 mil halves the connector length vs. traditional 100 mil x 100 mil products
• Latching Ejector for rugged high performance applications
• Available for through hole or surfacemount attachment
• High temperature plastic for lead free surfacemount or Paste-in-Hole soldering methods
• Four-wall shroud provides contact protection
• Contacts: 20, 26, 36, 40, 50, 60, 68, 80 and 100
• See the Regulatory Information Appendix (RIA) in the “RoHS compliance” section of www.3Mconnectors.com for compliance information Date Modifi ed: April 2, 2013 TS-0253-K Sheet 1 of 7 Physical Insulation: Material: High Temperature Plastic (LCP) Flammability: UL 94V-0 Color: Black Contact: Material: Copper Alloy Plating: Underplating: 100 µ" [2.54 mm] Nickel Wiping Area: 30 µ" [0.76 mm] Gold Solder Tails: Matte Tin or Tin Lead (See Ordering Information) Marking: 3M Logo, Part Number and Orientation Triangle Mating Compatibility: 820 Series (TS-0254) Electrical Current Rating: 3.00 A, 1 Contact Powered

2.00 A, 4 Contacts Powered

0.75 A, All Contacts powered

Rating Conditions: EIA-364-070 Method 2, 30 degrees C maximum temperature rise, 20% derated. Reference appropriate 3M Product Specifi cation for detailed current derating curves. Insulation Resistance: > 1 × 109 Ω at 500 VDC Withstanding Voltage: 500 VRMS at Sea Level Environmental Temperature Rating: -55°C to +105°C Process Rating: Maximum 260°C (Profi le per J-STD-020C) Moisture Sensitivity Level: 1 (per J-STD-020C) UL File No.: E68080

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 2 of 7 Inch [Imm] Tolerance Unless Noted .0 .00 .000 [ ] Dimensions for Reference Only Ordering Information PTH Right Angle Header 81XXX - 5X0X03 - XX Notes: D Position 1 Orientation Triangle .440 ± .010 [11.18] .620 Ref [ 15.75 ] .405 [10.29] .265 [6.73] 2X Ø.116 [2.95] .105 [2.67] .160 Ref [4.06] .306 Ref [7.77] “F” (See Table 2) .015 [0.38] .140 ± .010 [3.56] Short Latch Long Latch .165 ± .010 [ 4.19 ] .828 Ref [ 21.03 ] Table 1 Contact Quantity Dimensions A B C D Short (Ref.) D Long (Ref.) 020 1.060 [26.92] 0.722 [18.34] 0.500 [12.70] 1.671 [42.44] 1.842 [46.79] 026 1.210 [30.73] 0.872 [22.15] 0.650 [16.51] 1.821 [46.25] 1.992 [50.60] 036 1.460 [37.08] 1.122 [28.50] 0.900 [22.86] 2.071 [52.60] 2.242 [56.95] 040 1.560 [39.62] 1.222 [31.04] 1.000 [25.40] 2.171 [55.14] 2.342 [59.49] 050 1.810 [45.97] 1.472 [37.39] 1.250 [31.75] 2.421 [61.49] 2.592 [65.84] 060 2.060 [52.32] 1.722 [43.74] 1.500 [38.10] 2.671 [67.84] 2.842 [72.19] 068 2.260 [57.40] 1.922 [48.82] 1.700 [43.18] 2.871 [72.92] 3.042 [77.27] 080 2.560 [65.02] 2.222 [56.44] 2.000 [50.80] 3.171 [80.54] 3.342 [84.89] 100 3.060 [77.72] 2.722 [69.14] 2.500 [63.50] 3.671 [93.24] 3.842 [97.59] C Table 2 PCB Thickness "F" Solder Tail Length ± .010 A B C .015 X .015 [0.38] X [0.38] See Note 1 Position 2 2X .092 [2.34] .310 [7.87] Position 1 .050 Typ [1.27] .100 Ref [2.54].015 X .015 [0.38] X [0.38] Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050" X .100" Wiremount Socket 820 Series. Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) Contact Tail: 2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard) 3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order) 4 = Solder Tail for .125 [ .318 ] PC Board (Special Order) Plating suffix: blank = 125 µ" tin lead tails (RIA E3 & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Contact Quantity (See Table 1) Ejector Latches (If Ordered Separately) Long Latches 3505-28B (black) Short Latches 3505-29B (black)

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 3 of 7 *Solder Thief Solder Pads (See Note 2) .050 ± .002 [1.27] .100 ± .002 [2.54] .045 - .060 [1.14] - [1.52] .025 - .035 [0.64] - [0.89] *Solder Thief Solder Pads required only on Solder side of PC Board. View A Ø.024 ± .003 Typ [0.64] .050 ± .002 Typ [1.27] Tolerance Noncumulative Flow Solder Direction Position 2 Position 1 .100 ± .002 [0.64] C ± .002E .025 ± .002 [0.64] .355 Max [9.02] .305 Min [7.75] .160 ± .002 [4.06] View A Table 3 Ejector Latches Dimension E Min None .575 [14.61] Long 1.010 [25.65] Short .885 [22.48] Recommended Mounting Hole Pattern PTH Right Angle Header (shown for mounting side of PC Baord) Notes: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Dummy or Solder Thief Solder Pad at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The solder thiefs are only required on the end of the rows which leave the solder bath last. 3. In order to facilitate soldering it is recommended that ejector latches be installed after the soldering process.

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 4 of 7 Table 4 Contact Quantity Dimensions A B C Short (Ref.) C Long (Ref.) D C Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050" x .100" 820 Series Socket. Ordering Information PTH Straight Header 81XXX - 6X0X0X - XX Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) Contact Tail: 2 = Solder Tail for .062 [ 1.57 ] PC Board (Standard) 3 = Solder Tail for .094 [ 2.39 ] PC Board (Special Order) 4 = Solder Tail for .125 [ .318 ] PC Board (Special Order) Plating suffix: blank = 125 µ" tin lead tails (RIA E3 & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Contact Quantity (See Table 4) Ejector Latches (If Ordered Separately) Long Latches 3505-28B (black) Short Latches 3505-29B (black) A B See Note 1 Position 2 .310 [7.87] Position 1 .015 X .015 .050 Typ [1.27] .100 Ref [2.54] Optional Press /f_it post mount alignment feature Position 1 Orientation Triangle [0.38 X 0.38] 4.18 .165 ±.010 2.34 .0922X 10.29 .405 .38 .015 21.03 .828 Ref 15.75 .620 Ref 2,95 .1162XØ 11.17 .440 ±.010 .015 X.015 D .265 [6.73] .140 ± .010 “F” (See Table 2) .100 [2.54] .05 Ref Contact Mating Point Table 5 PCB Thickness "F" Solder Tail Length ± .010 Board Mounting Options: 1 = None (Special Order) 3 = Press fit posts both ends (Standard)

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 5 of 7 .050 ± .002 [1.27] ∅.025 ± .003 [0.64] .100 ± .002 [2.54] .045 - .060 [0.64] - [0.89] *Solder Thief Solder Pads required only on Solder side of PC Board. View A *Solder Thief Solder Pads (See Note2) VIEW A 2X .205 ± .003 [5.21] .050 ± .002 Typ [1.27] Tolerance Noncumulative Flow Solder Direction .160 Min [4.06] .050 ± .003 [1.27] .100 ± .002 [2.54] .225 Min [5.72] .100 ± .002 [2.54] 2X ∅ .109 ± .002 [2.77] D ± .002E ∅.025 ± .003 Typ [0.64] View A Table 6 Ejector/Latches Dimension E (Min) None .215 [5.46] Long .650 [16.51] Short .525 [13.34] Inch [Imm] Tolerance Unless Noted .0 .00 .000 [ ] Dimensions for Reference Only Recommended Mounting Hole Pattern PTH Vertical Header (shown for mounting side of PC Board) Note: 1. Recommended to process PC Boards through the solder bath such that the connector enters end first (two solder tails at a time). This will help prevent solder bridging. 2. A Solder Thief Solder Pad (Dummy Pad) at the end of each row is recommended on the bottom or solder side of the PC Board in order to help prevent solder bridging on the end solder tails. The Solder Thiefs are only required on the end of the rows which leave the solder bath last.

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 6 of 7 .346 ± .010 [8.79] .140 ± .010 [3.56] .265 [6.73] Position 1 Orientation Triangle .440 ± .010 [11.18] .620 Ref [15.75] D .165 ± .010 [4.19] Short Latch Long Latch .092 [2.34] Optional Single Press Fit Post Mount/Alignment Feature ∅.116 [2.95] Optional Metal Clip Retention .015 [0.38] .405 [10.29] .828 Ref [21.03] .093 [2.36] .05 Ref Contact Mating Point Ordering Information SMT Straight Header 81XXX - 6X0C0X - XX - XX Ejector/Latch System: 0 = None (Special Order) 5 = With Short Ejectors Installed (Special Order) 6 = With Long Ejector Latches Installed (Standard) Board Mounting Options: 1 = None 4 = Press Fit Post Mount at Position 1 end 7 = Metal retention clips 8 = #1 end press fit post & metal retention clips (Special Order) Packaging Options: Blank = Trays WX = Tape & Reel Package (see table) Contact Quantity (See Table 7) Ejector Latches (If Ordered Separately) Long Latches 3505-28B (black) Short Latches 3505-29B (black) C Inch [Imm] Tolerance Unless Noted .0 .00 .000 [ ] Dimensions for Reference Only Plating suffix: blank = 125 µ" tin lead tails (RIA E3 & C2 apply) RB = 250 µ" matte tin tails (RIA E1 & C1 apply) Notes: 1. This polarization bump does not exist on the 20 position header. 2. Recommended to be mated to the .050" X .100" 820 Series Wiremount Socket. Table 7 Contact Quantity Dimensions A B D Short (Ref.) D Long (Ref.) Tape & Reel Suffix 020 1.060 [26.92] 0.722 [18.34] 1.671 [42.44] 1.842 [46.79] WF 026 1.210 [30.73] 0.872 [22.15] 1.821 [46.25] 1.992 [50.60] WF 036 1.460 [37.08] 1.122 [28.50] 2.071 [2.60] 2.242 [56.95] WG 040 1.560 [39.62] 1.222 [31.04] 2.171 [55.14] 2.342 [59.49] WG 050 1.810 [45.97] 1.472 [37.39] 2.421 [61.49] 2.592 [65.84] WG 060 2.060 [52.32] 1.722 [43.74] 2.671 [67.84] 2.842 [72.19] WG 068 2.260 [57.40] 1.922 [48.82] 2.871 [72.92] 3.042 [77.27] WH 080 2.560 [65.02] 2.222 [56.44] 3.171 [80.54] 3.342 [84.89] WH 100 3.060 [77.72] 2.722 [69.14] 3.671 [93.24] 3.842 [97.59] WH Notes: Latches supplied in the "open" position unless specified otherwise Suffix determined with no posts or clips. Addition of posts or clips may increase suffix. 120 mm (WH) is the maximum width of pocket tape.

Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M™ 4-Wall, Tripolarized Header .050" × .100" Latch/Ejector, PTH & SMT Straight, PTH Right Angle 810 Series TS-0253-K Sheet 7 of 7 □ .065 ± .002 Typ [1.65] Typ, Full R Detail A Optional plated thru hole for metal clip retention □ .042 ± .003 Typ (Plated thru hole) [1.07] Recommended Mounting Hole Pattern, SMT Straight Header (Shown for mounting side of PC Board) .050 ± .002 Typ [1.27] Tolerance Noncumulative 2X .075 ± .002 [1.905] .205 ± .003 [5.21] .376 [9.55] .280 [7.11] H Optional Drilled Hole for Plastic Post ∅.109 ± .002 [2.77] .220 ± .003 [5.59] .158 ± .002 [4.01] See Detail A F .029 ± .001 [0.74]Position 2 .110 ± .002 [2.79] Position 1 CL CL CL CL G Ejector Latches Dimensions H Min None .775 [19.69] Long 1.085 [27.56] Short 1.21 [30.73] No. of Positions Dimensions F G 60 1.450 [36.83] 0.000 68 1.650 [41.91] 0.000 80 1.950 [49.53] 0.000 100 2.450 [62.23] 0.000

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of ninety (90) days from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. Please recycle. Printed in USA. © 3M 2012. All rights reserved. RIA-2217B-E 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com 3M is a trademark of 3M Company.