80W-12A DBLECTRO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
80W 60Amp Series High Power / Current PRODUCT DESCRIPTIONS SPECIFICATIONS This high power carry current series provides ultra power instrumentation, high power device test and metsys yrettab ralos sa hcus ,stnemeriuqer This product line offers carry current/pulse 25A, 50A and 60A parallel. -Carry Current up to 500A -Long Reliability 10 cycle capability control. genreal purpose -Low coil drive available to 80W 60Amp Series 80W-12A□□E0 High Power / Current Parameters Units 2 Form A Test Conditions Coil Specifications Nominal Coil Voltage Coil Resistance Operate Voltage Release Voltage VDC Ω VDC Max VDC Min 5.0 4.0 0.7 12.0 9.6 1.2 24.0 200 19.2 2.4 ±10% @ 20˚C 15˚C to 35˚C 15˚C to 35˚C Contact Ratings Switching Voltage Switching Current Carry Current Carry Current (Pulse) Contact Rating Life Expectancy Contact Resistance Contact Resistance Stability Volts Amps Amps Amps Watts x106 Cycle mΩ mΩ 500 2.0 (60A+60A=120A) 100 10000 2.0 Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance Max DC/Peak AC resistance @on:10mS off:40mS Max DC/Peak AC Resist @ 1V 10mh Max initial @ operate voltage Max initial @ operate voltage Relay Specifications Insulation Resistance Dielectric Strength Operate Time (No Bounce) Release Time Ω Min VDC Min VDC Min VDC Min msec Max msec Max 1010 3000 3000* 3000 3.0 3.0 Between all isolated pins @ 100V 20˚C 40%RH Between contacts Contacts to shield Contacts/Shield to coil @ nominal coil voltage 100Hz square wave Diode suppression Environmental Ratings Measurement Reference Conditions Temp: 15˚C to 35˚C Humidity: 25% to 75%RH Atmospheric Pressure: 860 to 1060hpa Storage temp: -20˚C to +80˚C Operate temp: -10˚C to +60˚C Vibration: 20G’s to 2000Hz Shock: 50G’s Ordering Code: 80W-12A□1)□2)E0 □2)=0 (No shield), 1 (Electrostatic) *
0.709 0.472 0.472 2.854 3.169 MAX 2.539 (80.5) (72.5) (64.5) (2- 4.0) 2- 0.157 0.472 2.303 (58.5) (46.5) (20.0) 1.831 0.787 0.394 MAX 0.039 2.756 (70.0) (10.0) (1.0) LED(Red) UP P1 P2 80W-12A 1E0 MAX 0.709 0.472 0.472 2.854 3.169 MAX 2.539 (80.5) (72.5) (64.5) (2- 4.0) 2- 0.157 3 0.472 2.303 (58.5) (46.5) (20.0) 1.831 0.787 P1 P2 MAX 0.394 (10.0) 0.394 (10.0) G 0.354 (9.0) UP P2 (-)P1 (+) UP P2(-)P1(+) G Note: Hg wet contacts must be mounted within 30 of vertical plane.