8063369 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
VTOE-D7-T3-M22C-08-V-S-PC-S Part number: 8063369 Data sheet Feature Value Valve function 2/2, closed, monostable Operating pressure 0 MPa ... 0.05 MPa Operating pressure 0 bar ... 0.5 bar Operating pressure 0 psi ... 7.25 psi Internal volume 113 µl valve with fluid connections Nominal width 0.8 mm Nominal width of dosing needle 0.32 mm Length of dosing needle 30 mm Width dimension 9 mm Sealing principle Soft Mounting position Any Reset method Mechanical spring Type of control Direct Water flow rate at max. operating pressure 370 µl/s Min. dosing volume 1 µl Note on dosing volume Depending on the configuration, environment and application Typical dosing precision <1% CV for volumes >5 µl <2.5% CV for volumes between 1-5 µl Note on dosing precision Depending on the configuration, environment and application Max. switching frequency 4 Hz Note on switching frequency Dependent on the ambient temperature and installation state On switching time 7 ms Note on switching time on Depending on the configuration, environment and application Switching time off 2 ms Note on switching time off Depending on the configuration, environment and application Duty cycle 100 % with individual mounting 50 % in case of block mounting (max. switch-on time 1 s) Electrical power consumption 1.8 W Nominal operating voltage DC 24 V Permissible voltage fluctuations +/- 10 % Medium Liquid media Liquid media Information on medium Observe resistance of materials that come into contact with media Application note See application note (available on the support portal at festo.com) Vibration resistance Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6 Shock resistance Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27 1/27/22 - Subject to change - Festo AG & Co. KG 1/2
Corrosion resistance class (CRC) 0 - No corrosion stress LABS conformity VDMA24364-B2-L Storage temperature -20 °C ... 70 °C Temperature of medium 5 °C ... 50 °C Degree of protection IP30 Note on degree of protection In mounted state Ambient temperature 5 °C ... 40 °C Product weight 18 g Electrical connection 2-wire Cable Open end Cable length 0.15 m Wire ends Stripped Nominal conductor cross section AWG28 Type of mounting With internal thread and centering sleeve Fluid connector UNF1/4-28 Note on fluid connector Fitting enclosed for pneumatic tubing with 3 mm outside diameter Material of dosing needle High-alloy stainless steel Material number for dosing needle 1.4301 Note on materials RoHS-compliant Materials in contact with the media ETFE FPM PC PEEK PPS High-alloy stainless steel Actuation type Electrical Nominal altitude of use above sea level <= 2000 m NHN Relative air humidity 0 - 95 % Non-condensing Contamination level 2 1/27/22 - Subject to change - Festo AG & Co. KG 2/2