805M1 TEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015 Page 1 MODEL 805M1 ACCELEROMETER SPECIFICATIONS  TO-5 Series Accelerometer  3-Wire Voltage Output  Low-Cost, Embedded Applications  <0.80mA Power Consumption The Model 805M1 is a miniature adhesive mount voltage output accelerometer built on a 3-pin TO- 5 header. It is available in ±20g and ±500g dynamic ranges and offers a flat frequency response to 12kHz. The accelerometer features a hermetic construction in a TO-5 header configuration. The model 805M1 incorporates a stable piezo-ceramic crystal with low power electronics in a 100% shielded housing suitable for many embedded OEM applications. The accelerometer is offered in two configurations; one for adhesive mounting and one for stud mounting.

FEATURES

 ±20g and ±500g Range  Wide bandwidth up to 12kHz  TO-5 Configuration  Hermetically Sealed  -40°C to +100°C Operating Range  Case Grounded Design  3.0-5.5 Excitation Voltage

APPLICATIONS

 Machine Monitoring  Low-Cost OEM Installation  Permanent Structural Study  Embedded Sensing Solution  Data Loggers DIMENSIONS

SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015 Page 2 PERFORMANCE SPECIFICATIONS All values are typical at +24°C, 80Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update and change these specifications without notice. Parameters DYNAMIC Notes Range (g) ±20 ±50 ±100 ±200 ±500 Sensitivity (mV/g) 100 40 20 10 4 ±10% Frequency Response (Hz) 1-8000 1-8000 1-8000 1-8000 1-8000 ±1dB Natural Frequency (Hz) 34000 34000 34000 34000 34000 Non-Linearity (%FSO) ±1 ±1 ±1 ±1 ±1 Transverse Sensitivity (%) 5 5 5 5 5 Shock Limit (g) 5000 5000 5000 5000 5000 ELECTRICAL Bias Voltage (Vdc) Exc Voltage / 2 Total Supply Current (mA) <0.80 Excitation Voltage (Vdc) 1 3.0 to 5.5 Output Impedance (Ω) <100 Insulation Resistance (MΩ) >100 @50Vdc Full Scale Output Voltage (V) ±2 Grounding Case grounded to mounting surface ENVIRONMENTAL Temperature Response (%) ±10 Operating Temperature (°C) -40 to +100 Storage Temperature (°C) -54 to +125 PHYSICAL Sensing Element Piezo-Ceramic Case Material Stainless Steel Weight (grams) 5.0 Mounting Adhesive or Circuit Board (M3 Stud Mounting for -01 Option) 1 The model 805M1 can be operated with 2.8V excitation but the full-scale range will be limited. Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 80Hz The information in this sheet has been carefully reviewed and is believ ed to be accurate; however, no responsibility is assumed for inaccuracies. Fur thermore, this information does not convey to the purchaser of such devices any license u nder the patent rights to the manufacturer. Measurement Specialties, Inc. r eserves the right to make changes without further notice to any product herein. M easurement Specialties, Inc. makes no warranty, representation or guara ntee regarding the suitability of its product for any particular purpose, nor does Measureme nt Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitatio n consequential or incidental damages. Typical parameters can and do v ary in different applications. All operating parameters must be validated for each customer application b y customer’s technical experts. Measurement Specialties , Inc. does not convey any license under its patent rights nor the rights of others.

SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015 Page 3

ORDERING INFORMATION

PART NUMBERING Model Number+Range 805M1-GGGG -XX l l_____ Optional Stud Dash Number Dash Number Stud Options l_____ Range (0020 is 20g) - 01 M3 x 0.5 6g Example: 805M1-0020 Model 805M1, 20g TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believe d to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligation s shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. NORTH AMERICA Measurement Specialties, Inc., a TE Connectivity Company

1000 Lucas Way

Hampton, VA 23666 Sales and Customer Service Tel: +1-800-745-8008 or +1-757-766-1500 Fax: +1-757-766-4297 t&m@meas-spec.com EUROPE MEAS France SAS a TE Connectivity Company

26 Rue des Dames

F78340 Les Clayes-sous-Bois France Sales and Customer Service Tel: +33 (0) 1 79 33 00 Fax: +33(0)1 34 81 03 59 t&m@meas-spec.com ASIA Measurement Specialties (China), Ltd., a TE Connectivity Company No. 26 Langshan Road Shenzhen High-Tech Park (North) Nanshan District, Shenzhen 518057 China Sales and Customer Service Tel: +86 755 3330 5088 Fax: +86 755 3330 5099 t&m@meas-spec.com