8048150 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DFPD-300-RP-90-RS60-F0710-R3-EP Part number: 8048150 Data sheet Feature Value Size of valve actuator 300 Flange hole pattern F0710 Swivel angle 90 deg End-position adjusting range at 0° -5 deg ... 5 deg End-position adjusting range at nominal swivel angle -5 deg ... 5 deg Depth shaft connection 24 mm Type code DFPD Standard connection for valve ISO 5211 Mounting position Any Mode of operation Single-acting Design Gear rack/pinion Closing direction Clockwise closing Symbol 00991266 Valve connection conforms to standard VDI/VDE 3845 (NAMUR) Connection for valve positioner and position sensor conforms to standard VDI/VDE 3845 size AA 2 Devices type according to VDMA 66413 Safety device Safety function The fundamental safety function is that the control valve moves to the switching position when the compressed air is turned off. It is reset by spring force. Safety integrity level (SIL) Up to SIL 2 low demand mode up to SIL 3 in a redundant architecture up to SIL 1 high demand mode Certified for safety function to ISO 13849 and IEC 61508 (SIL) Product can be used in safety-related parts of control systems up to SIL 2, low demand Product can be used in safety-related parts of control systems up to SIL 1, high demand up to SIL 3 in a redundant architecture Operating pressure 2 bar ... 8 bar Operating pressure 29 psi ... 116 psi Nominal operating pressure 0.6 MPa Nominal operating pressure 6 bar Nominal operating pressure 87 psi Maritime classification See certificate CE marking (see declaration of conformity) as per EU explosion protection directive (ATEX) 8/2/21 - Subject to change - Festo AG & Co. KG 1/2
Explosion prevention and protection Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX) Certificate issuing authority DNVGL TAP00001CE German Technical Control Board (TÜV) Rheinland 968/V 1106.00/19 ATEX category gas II 2G ATEX category for dust II 2D Type of ignition protection for gas Ex h IIC T4 Gb X Type of (ignition) protection for dust Ex h IIIC T105°C Db X Explosive ambient temperature -20°C <= Ta <= +80°C Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Information on operating and pilot media Operation with oil lubrication possible (required for further use) Corrosion resistance class (CRC) 2 - Moderate corrosion stress Storage temperature -20 °C ... 60 °C Ambient temperature -20 °C ... 80 °C Torque at nominal operating pressure and 0° swivel angle 221 Nm Torque at nominal operating pressure and 90° swivel angle 115.3 Nm Note about the torque The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling. Spring return torque at 0° swivel angle 108.4 Nm Spring return torque with 90° swivel angle 214.1 Nm MTTFd 1126 years PFH 1.01E-7 PFD 7.8E-4 Air consumption at 6 bar per cycle 0°-nominal swivel angle-0° 11 l Product weight 12880 g Shaft connection T22 Pneumatic connection G1/4 Note on materials RoHS-compliant Material of sub-base Wrought aluminum alloy, anodized Cover material Die-cast aluminum, coated Seals material NBR Material of spring Spring steel Housing material Wrought aluminum alloy, anodized Material of piston Die-cast aluminum Material of bearing POM Cam material Steel Material of screws High-alloy stainless steel Shaft material High-alloy stainless steel 8/2/21 - Subject to change - Festo AG & Co. KG 2/2