802 MILL-MAX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

.100” Grid (.030” dia.) Pins, Straight and Right Angle Double Row www.mill-max.com /telephonesolid/telephonesolid516-922-600082 Series 802, 803

Ordering Information

Fig. 1 Fig. 2 Fig. 3 Fig. 4 Series 802...20-001 Right Angle Pin Header Specify # of pins 02-64 Specify # of pins 02-64 Series 803...20-001 Right Angle Socket Specify # of pins 002-100 Specify # of pins 002-100 Series 803...10-001 Straight Socket Series 802...10-001 Straight Pin Header Fig. 1 Fig. 2 Fig. 3 Fig. 4 Pin Plating 10μ” Au 200μ” Sn/Pb 200μ”S n SPECIFY PLATING CODE XX= 10 /rhombopen/rhombopen90 40 /rhombopen/rhombopen SPECIFY PLA TING CODE XX= 13 /rhombopen/rhombopen91 93 99 41 /rhombopen/rhombopen43 /rhombopen/rhombopen44 /rhombopen/rhombopen Sleeve (Pin) Contact (Clip) 10µ” Au 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 30µ” Au 10µ” Au 30µ” Au 200µ” Sn/Pb 10µ” Au 30µ” Au 200µ”Sn

  • Pin interconnects available with straight MM #7007 or right angle MM #5005/5107 solder tails. See page 182 for details.
  • Sockets are available with straight MM #1304 or right angle MM #1305/1306 solder tails. See pages 148 & 149 for details.
  • MM #1304, #1305 & #1306 receptacles use use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .030” diameter and .025” square pins. See page 221 for details.
  • Insulators are high temp. thermoplastic. RoHS 2002/95/EC XX=Plating Code See Below For Electrical, Mechanical & Enviromental Data, See pg. 4 For RoHS compliance select /rhombopen/rhombopenplating code. XX=Plating Code See Below For Electrical, Mechanical & Enviromental Data, See pg. 4 For RoHS compliance select /rhombopen/rhombopenplating code.