79500.W0167-1

79500 WIXROYD | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 1

Technical content

Recessed Pull Handles Pull Handles Order No. Type Finish l1 l2 Mounting cutout 79500.W0100-1 Screw Silver 100 60 104x73 79500.W0100-4 Screw Black 100 60 104x73 79500.W0118-1 Screw Silver 118 78 122x73 79500.W0118-4 Screw Black 118 78 122x73 79500.W0167-1 Screw Silver 167 127 171x73 79500.W0167-4 Screw Black 167 127 171x73 79500.W0500-1 Insert Silver 100 60 104x73 79500.W0500-4 Insert Black 100 60 104x73 79500.W0618-1 Insert Silver 118 78 122x73 79500.W0618-4 Insert Black 118 78 122x73 79500.W0667-1 Insert Silver 167 127 171x73 79500.W0667-4 Insert Black 167 127 171x73 79500 PULL HANDLES 0333 207 4497 sales@wixroyd.com 1 Material Profiled aluminium, with black polyamide end caps PA 6. Handle glass blasted and anodised, natural or black, satin finish. Technical Notes Two possible mounting options: 1) Mounting via screws (for panels >2,5mm thick): two countersunk holes for DIN966, M4x8 included on model. 2) Mounting via rubber insert (for panels 1 to 2,5mm thick): additional rubber insert at top of the handle pushes in from the back, securing the handle. Minimum stress resistance 500N. Tips Mounting method: - Make mounting cut-out in panel/ material. - Insert bottom rubber insert. - Attach end caps. - Press handle over lower edge of mounting cut-out at a 45° angle, ensuring correct position of rubber insert on the inside of the cut-out. - If using additional rubber insert for mounting, hold handle against cut-out and fit insert. Alternatively use two counter- sunk screws with spacing equal to l1-40mm (as shown).