79200 DESCO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com PHONE (909) 627-8178 DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407 WEB SITE: Desco.com PHONE (781) 821-8370 DRAWING NUMBER 79200 DATE: July 2017 © 2017 DESCO INDUSTRIES INC. Employee Owned WESCORP* ESD CELLULOSE TAPE, PLASTIC CORE *Wescorp is a Desco Industries brand. Note: Tape rolls may vary slightly in color. Width tolerance ±1/32" Tape widths are nominal metric ±0.8 mm (±1/32") 1/4" is 6 mm nominal or 0.236" 1/2" is 12 mm nominal or 0.472" 3/4" is 18 mm nominal or 0.709" 1" is 24 mm nominal or 0.945" 2" is 48 mm nominal or 1.890" Wescorp Tape Storage and Limited Warranty: The user must determine the suitability for use of an ESD tape for his particular application. For best results, tape inventory should be continually replenished. It is recommended that rolls of tape be stored flat and rotated (flipped over to the other side) periodically. Tapes should be stored in a dry, well ventilated room with a reasonably consistent temperature of 68°F (20°C) and be protected from exposure to direct sunlight. Tape should not be stored in ultraviolet sunlight, moisture, or heat. Tape over one year old should be evaluated by the user to determine acceptability for the user’s application. Desco Industries, Inc. recommends those tracking useful life of product to use shipping/invoice date as Desco Industries, Inc. expressly warrants that for a period of one (1) year from the date of purchase, our Wescorp Brand ESDTape will be free of defects in material (parts) and workmanship (labor). See details of Limited Warranty online at Desco.com/Warranty.aspx No sulfur, surfactants, amines, or silicone based material (adhesive, film backing, release material) is used in the manufacture of our cellulose tape. *Military organizations sometimes use MIL-STD-1285 for hardware marking and that document once required the use of the “three arrows in a circle” symbol. That symbol has been changed for consistency with industry marking to the “hand in triangle” ESD Susceptibility symbol.“ (Ref: ESD TR20.20 section 5.3.14.1) Specifications and procedures subject to change without notice RoHS 3, REACH, and Conflict Minerals Statement See the Desco Industries RoHS 3, REACH, and Conflict Minerals Statement: http://www.descoindustries.com/ROHS.aspx See the Desco Limited Warranty: http://desco.descoindustries.com/Limited-Warranty.aspx See the Desco Disclaimer: http://desco.descoindustries.com/Disclaimer.aspx Tape 0.5" 0.75" 1" 2" Core Length Clear 79200 79203 79201 79204 79202 79205 79206 36 yds 72 yds Clear with Symbols 79209 79210 79211 79212 3" 72 yds Clear w/ Symbols and Yellow Stripe 79275 79276 79277 79278 3" 72 yds Specifications Standard Document Meets Requirements of: ANSI/ESD S20.20 Packaging Electrical Properties Typical Values Test Procedures/Method Rs Resistance: 1 x 10 9 to < 1 x 1011 ohms ANSI/ESD STM11.11 Physical Properties Construction: Cellulose film tape coated with a high tack, non-staining, rubber adhesive system on plastic core Thickness: 1.9 mil 0.0019”, (0.06 mm) Color:* Clear, with ESD Symbols Temperature Range: -10°C to +71°C (+14°F -to +160°F) 100°C for 10 min max Sulfur Content: No Sulfur Backing: Cellulose Adhesive: Synthetic Rubber Tensile: 22 LBS./IN Adhesion: 59 OZ/IN Elongation: 22.5% Antistatic Tape Imprint on Clear Cellulose with Symbols Imprint on Clear Cellulose w/ Symbols w/Yellow Stripe Antistatic Tape