MM12-60A-N-ZC0 SICK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
MAGNETIC PROXIMITY SENSORS
A B C D E F H I J K L M N O P Q R S T MM12-60A-N-ZC0 | MM Namur MAGNETIC PROXIMITY SENSORS Illustration may differ
Ordering information
Type Part no. MM12-60A-N-ZC0 7900287 Other models and accessories www.sick.com/MM_Namur Detailed technical data
Features
Housing Cylindrical thread design Thread size M12 Diameter Ø 12 mm Sensing range Sn 5 mm ... 60 mm 1) Safe sensing range Sa 48.6 mm Magnetic sensitivity ≤ 1 mT Switching frequency 5,000 Hz Connection type Male connector M12, 4-pin Switching output NAMUR Output characteristic Control current depending on switching state according to NAMUR EN 60947-5-6 Electrical wiring DC 2-wire Magnetic alignment Axial Enclosure rating IP67 2) 1) Sensing range based on installation in non-magnetic material using Magnet MAG-3010-B (M4.0). 2) According to EN 60529. Mechanics/electronics Ripple ≤ 5 % 1) Time delay before availability ≤ 2 ms Hysteresis 1 % ... 10 % Reproducibility ≤ 1 % 2) Temperature drift (of Sr) ± 10 % EMC According to EN 60947-5-2 1) Of VS. 2) Von Sr (VS und Ta constant). 3) For connection to a separately certified intrinsically safe circuit only.
2 PROXIMITY SENSORS | SICK Online data sheet | 2018-07-07 23:38:28
Subject to change without notice
MM12-60A-N-ZC0 | MM Namur MAGNETIC PROXIMITY SENSORS Current consumption, sensor is activated ≥ 2.5 mA Current consumption, sensor is not activat- ed ≤ 1 mA Cable resistance ≤ 50 Ω Wire-break protection ✔ Short-circuit protection ✔ Reverse polarity protection ✔ Shock and vibration resistance 30 g, 11 ms / 10 ... 55 Hz, 1 mm Ambient operating temperature –25 °C ... +70 °C Housing material Metal, Nickel-plated brass Housing length 62.5 mm Thread length 40 mm Tightening torque, max. ≤ 7 Nm Items supplied Fastening nuts (2 x) EC Approval Certificate TÜV 99 ATEX 1398 ATEX marking EX II 2G Ex ib IIC T6 Gb Ta: - 25 °C ... + 70 °C Ex area category 2G Input voltage Ui max. 16 V 3) Input power Pi max. 100 mW 3) Input current Ii max. 30 mA 3) Internal capacitance Ci max. 15 nF 3) Internal inductance Li max. 35 µH 3) Nominal voltage 8.2 V DC 1) Of VS. 2) Von Sr (VS und Ta constant). 3) For connection to a separately certified intrinsically safe circuit only. Classifications ECl@ss 5.0 27270104 ECl@ss 5.1.4 27270104 ECl@ss 6.0 27270104 ECl@ss 6.2 27270104 ECl@ss 7.0 27270104 ECl@ss 8.0 27270104 ECl@ss 8.1 27270104 ECl@ss 9.0 27270104 ETIM 5.0 EC002544 ETIM 6.0 EC002544 UNSPSC 16.0901 39122230 2018-07-07 23:38:28 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 3
A B C D E F H I J K L M N O P Q R S T MM12-60A-N-ZC0 | MM Namur MAGNETIC PROXIMITY SENSORS Connection diagram cd-015 + (L+) - (M) not connected not connected Sensing range diagram (1.18) (2.36) (3.54) 120 (4.72) Distance in mm (inch) /c49/c32MAG-3315-B (M 5.1) /c50/c32MAG-3015-B (M 5.0) /c51/c32MAG-3010-B (M 4.0) /c52/c32MAG-2006-B (M 3.0) /c53/c32MAG-0625-A (M 2.0) /c54/c32MAG-1003-S (M 1.0) Magnet type Max. sensing range Sn, flush or non-flush installation, non-magnetizable material Part no. 7902086 7901786 7901785 7901784 7901783 7901782 5 68 5 68 5 60 5 36 5 23 /c54 /c53 /c52 /c51 /c50 /c49 Dimensional drawing (Dimensions in mm (inch)) MM12 Namur, connector 40 (1.57) 62.5 (2.46) M12 x 1 2 3 ① Connection ② Indication LED ③ Fastening nuts (2x); width across 17, metal
4 PROXIMITY SENSORS | SICK Online data sheet | 2018-07-07 23:38:28
Subject to change without notice
MM12-60A-N-ZC0 | MM Namur MAGNETIC PROXIMITY SENSORS Recommended accessories Other models and accessories www.sick.com/MM_Namur Brief description Type Part no. Universal bar clamp systems Plate N05 for universal clamp bracket, M12, Zinc plated steel (sheet), Zinc die cast (clamping bracket), Universal clamp (5322626), mounting hardware BEF-KHS-N05 2051611 Plate N05N for universal clamp bracket, M12, Stainless steel 1.4571 (sheet), Stainless steel 1.4408 (clamp), Universal clamp (5322626), mounting hardware BEF-KHS-N05N 2051621 Mounting bar, straight, 200 mm, stainless steel, Stainless steel (1.4571) BEF-MS12G-NA 4058914 Mounting bar, L-shaped, 150 mm x 150 mm, steel, steel, zinc coated, without mounting hardware BEF-MS12L-A 4056052 Mounting brackets and plates Mounting plate for M12 sensors, steel, zinc coated, without mounting hardware BEF-WG-M12 5321869 Mounting bracket for M12 sensors, steel, zinc coated, without mounting hardware BEF-WN-M12 5308447 Terminal and alignment brackets Clamping block for round sensors M12, without fixed stop, plastic (PA12), glass-fiber re- inforced, mounting hardware included BEF-KH-M12 2051479 Clamping block for round sensors M12, with fixed stop, plastic (PA12), glass-fiber rein- forced, mounting hardware included BEF-KHF-M12 2051480 Modules and gateways NAMUR isolatig amplifier, Cable fault detection, Switching outputs: 2 NO relay (1 per channel), Supply voltage: 24 V ... 230 V, Voltage type: AC/DC EN2-2EX1 6041096 NAMUR isolatig amplifier, Cable fault detection, Switching outputs: 2 NO relay (1 per channel), Supply voltage: 19,2 V ... 30 V, Voltage type: DC EN2-2EX3 6041095 Plug connectors and cables Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 2 m YF2A14-020UB3XLEAX 2095607 Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 2 m YF2A14-020VB3XLEAX 2096234 Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YF2A14-050UB3XLEAX 2095608 Head A: female connector, M12, 4-pin, straight, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YF2A14-050VB3XLEAX 2096235 Head A: female connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 2 m YG2A14-020UB3XLEAX 2095766 2018-07-07 23:38:28 | Online data sheet Subject to change without notice PROXIMITY SENSORS | SICK 5
A B C D E F H I J K L M N O P Q R S T MM12-60A-N-ZC0 | MM Namur MAGNETIC PROXIMITY SENSORS Brief description Type Part no. Head A: female connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 2 m YG2A14-020VB3XLEAX 2095895 Head A: female connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PUR, halogen-free, unshielded, 5 m YG2A14-050UB3XLEAX 2095767 Head A: female connector, M12, 4-pin, angled, A-coded Head B: Flying leads Cable: Sensor/actuator cable, PVC, unshielded, 5 m YG2A14-050VB3XLEAX 2095897 Head A: female connector, M12, 4-pin, straight Head B: - Cable: unshielded DOS-1204-G 6007302 Head A: female connector, M12, 4-pin, angled Head B: - Cable: unshielded DOS-1204-W 6007303 Head A: male connector, M12, 4-pin, straight Head B: - Cable: unshielded STE-1204-G 6009932 Head A: male connector, M12, 4-pin, angled Head B: - Cable: unshielded STE-1204-W 6022084 Magnets Magnet without mounting hole, Ø 6 mm, height 25 mm MAG-0625-A 7901783 Magnet without mounting hole, Ø 10 mm, height 3 mm MAG-1003-S 7901782 Magnet with mounting hole for M4 countersunk screw, Ø 20 mm, height 6.5 mm MAG-2006-B 7901784 Magnet without mounting hole, Ø 30 mm, height 10 mm MAG-3010-B 7901785 Magnet with mounting hole for M5 flat head screw, Ø 31 mm, height 15 mm MAG-3015-B 7901786 Magnet with mounting hole for M5 flat head screw, Ø 36 mm, height 19.5 mm MAG-3515-B 7902086
6 PROXIMITY SENSORS | SICK Online data sheet | 2018-07-07 23:38:28
Subject to change without notice
SICK AG | Waldkirch | Germany | www.sick.com SICK At A GlAnCe SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applica- tions. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and require- ments. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK lifetime Services provide support throughout the ma- chine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” WOrldWIde preSenCe: Contacts and other locations – www.sick.com