790-037SH-5P5MNSB

790-037SH-5P5MENA GLENAIR | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-16 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX A A B B C C D D E E F F G G H H INDEX INDEX PANEL MoUNt PLUGS, SoCKEt CoNtACtS, 90° PCB tERMINAtIoN, 790-037S HOW TO ORDER Sample Part Number 790-037S H-5P5 M E P B Part Number Shell Size - Insert Arr. Shell Finish EMI Spring Hardware Option PC Tail Length 790-037S Rear Panel Mounted Plug with 90° PC Tail Contacts for Termination to Backplanes or Flexible Circuits See Table 1 for Available Insert Arrangements M Electroless Nickel general purpose

applications

1000 Hour Grey™

(non-reflective grey) ZNU Zinc-Nickel with Black Chromate tactical applications (non-reflective black) Additional shell finishes are listed on page C-9. E EMI Spring N No Spring EMI SPRING N No Hardware A .125 Inch (3.2 mm.) B .250 inch (6.4 mm.) PC TAIL LENGTH G Guide Pin P Female Jackpost S Female Guide Socket MATERIALS AND FINISHES Shell Aluminum alloy Contacts Copper alloy, gold plated, with stainless steel hood Insulator Liquid crystal polymer (LCP) PCB Tray Thermoplastic EMI Shroud Aluminum alloy Hardware 300 series stainless steel Panel Gasket Fluorosilicone, conductive Encapsulant Epoxy Lightweight, rugged right angle headers feature gold-plated PC tail contacts for thru- hole printed circuit board termination. 790-037S connectors are designed for rear-panel mounting and are supplied with conductive panel gaskets. Contacts are permanently installed and are sealed with epoxy. Shells are aluminum alloy. EMI shroud improves shielding performance. Threaded board mounting holes and integral standoffs simplify installation. Available in 29 different contact arrangements, these connectors feature size #23 signal contacts along with #16 and #12 power contacts for up to 23 amps current rating. Optional EMI spring improves shell-to-shell conductivity and shielding performance. SPECIFICATIONS Current Rating #23 5 AMPS, #16 13 A., #12 23 A. Dielectric Withstanding Voltage #23 500 VAC RMS, #12 and #16

1800 VAC RMS

Insulation Resistance 5000 megohms minimum Operating Temperature -65° C. to +150° C. Shock 300 g. Vibration 37 g. Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-17 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX TABLE 2 HARDWARE OPTION EMI SPRING EMI GASKETEMI COVER EPOXY POTTING FRONT INSULATOR .865 MAX. .183 POTTING TRAY V SHELL SOCKET CONTACT (SIZE 23) SOCKET POWER CONTACT (R/A SIZE 12) N No Mating Hardware Connector is supplied with blind, tapped holes. Shell sizes H and L have 6-32 UNC-2B thread, other sizes are #4-40. Minimum thread depth is .150" (3.81). P Jackposts Connector is supplied with non- removable jackposts. Shell sizes H and L have #4-40 UNC-2B thread, other sizes have #2-56 thread. LCP INSULATOR .007 (0.18) .195 (4.95) EMI GASKET .025 (0.64) EPOXY CONTACT PIN INTERFACIAL SEAL INSULATOR EPOXY .007 (0.18) .195 (4.95) EMI GASKET .025 (0.64) INTERFACIAL SEAL EMI SPRING EMI GASKETEMI COVER EPOXY POTTING FRONT INSULATOR .865 MAX. .183 POTTING TRAY V SHELL SOCKET CONTACT (SIZE 23) SOCKET POWER CONTACT (R/A SIZE 12) LCP INSULATOR .007 (0.18) .195 (4.95) EMI GASKET .025 (0.64) EPOXY CONTACT PIN INTERFACIAL SEAL INSULATOR EPOXY .007 (0.18) .195 (4.95) EMI GASKET .025 (0.64) INTERFACIAL SEAL EMI SPRING EMI GASKETEMI COVER EPOXY POTTING FRONT INSULATOR .865 MAX. .183 POTTING TRAY V SHELL SOCKET CONTACT (SIZE 23) SOCKET POWER CONTACT (R/A SIZE 12) G Male Guide Pins Connector is supplied with stainless steel guide pins to mate with code S guide sockets. Pins are non- removable. S Female Guide Sockets Connector is supplied with stainless steel guide sockets to mate with code G guide pins. Sockets are non- removable. CRoSS-SECtIoNAL vIEW oF 790-037STable 1 Contact Arrangements Layout Contact Quantity Face View#23 #16 #12 A-5 5 B-2P2 2 B-9 9 C-13 13 D-15 15 D-3P3 3 D-7P2 5 2 E-11P2 9 2 E-19 19 E-7P3 4 3 F-15P2 13 2 F-23 23 F-5P5 5 G-33 33 H-10P4 6 4 H-29P7 22 7 H-36P2 34 2 H-54P2 52 2 H-5P5 5 H-66 66 J-17P4 13 4 J-25P2 23 2 J-33 33 J-7P7 7 k-27P4 23 4 k-35P2 33 2 k-43 43 k-9P9 9 L-6P6 6 INSULATOR EPOXY EMI SHROUD TRAY SHELL .183 (4.65) EMI GASKET EMI SPRING SOCKET CONTACT .007 (0.18) .025 (0.64) Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-18 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX A A B B C C D D E E F F G G H H INDEX INDEX E MAX .500 (12.70) MAX 435 (11.05) TYP .335 (8.51) MAX .560 (14.22) MAX C BASIC B BASIC A MAX C BASIC D MAX .233 (5.92) MAX 2-56 UNC-2B X .150 (3.81) MIN

2 PLACES

REFERENCE. .158 (4.01) CONTACT TAIL DIA .228 (5.79) MIN .078 (1.98) MIN PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) 2-56 UNC-2B 790-037S ShELL SIzES A-F, J AND K Shell Size A Max. B Basic C Basic D Max. E Max. 790-037S DIMENSIoNS: ShELL SIzE A-F, J AND K Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-19 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX .355 (9.02) MAX 1.450 (36.83) MAX 2-56 UNC-2B X .150 (3.81) MIN FOR REFERENCE. 1.575 (40.01) BASIC 1.855 (47.12) MAX 1.215 (30.86) BASIC 1.215 (30.86) BASIC .630 (16.00) MAX .570 (14.48) MAX 1.010 (25.65) MAX .158 (4.01) .320 (8.13) MAX #2-56 FLAT HEAD SCREW .510 (12.95) TYP .228 (5.79) MIN .078 (1.98) MIN PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) .018/.022 (0.46/0.56) 790-037S DIMENSIoNS: ShELL SIzE G Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-20 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX A A B B C C D D E E F F G G H H INDEX INDEX .620 (15.75) MAX .320 (8.13) MAX .5075 (12.89) TYP .700 (17.78) MAX G BASIC F MAX H BASIC J .300 (7.62) MAX 4-40 UNC-2B X .150 (3.81) MIN #2-56 FLAT HEAD SCREW K MAX H BASIC JACKPOST SHOWN FOR REFERENCE. .349 (8.86) MAX .158 (4.01) PC TAIL LENGTH ± .020 (0.51) CODE A: .125 (3.18) CODE B: .250 (6.35) CONTACT TAIL DIA .088 (2.24) .288 (6.05) MIN 790-037S ShELL SIzES h AND L Shell Size F Max. G Basic H Basic J Max. K Max. 790-037S DIMENSIoNS: ShELL SIzE h AND L Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-25 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page A-5 .003 M A M .003 M A M .094 ± .003 (2.39 ±0.08) 2x .565 (14.35) .075 (1.91) .2825 (7.18) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) 4 5 2 3 B-2P2 .003 M A M .715 (18.16) .270 (6.86) .175 (4.45) (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) .003 M A M .094 ± .003 (2.39 ±0.08) 2x A1 A2 B-9 .003 M A M .003 M A M .715 (18.16) .075 (1.91) .3575 (9.08) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) .094 ± .003 (2.39 ±0.08) 2x 6 7 8 9 4 52 3 C-13 .003 M A M .865 (21.97) .075 (1.91) .4325 (10.99) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x 1 6 7 8 9 10 11 12 13 4 52 3 This section contains printed circuit board footprints for right angle Series 79 plugs. The contact identification numbers are shown for the connector mounting side of the PC board. Contact tails are gold over nickel plated. PCB Hole Patterns for 790-037S and 790-042S Plugs PC Tail Diameter Contact Size Ø Diameter In. mm. PC TAIL LENGTH CONNECTOR ORIENTATION Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-26 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page D-15 .003 M A M .965 (24.51) .075 (1.91) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 15x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .4825 (12.26) 1 6 7 8 9 10 11 12 13 14 15 4 52 3 D-3P3 .965 (24.51) .4825 (12.26) .175 (4.45) .003 M A M .003 M A M .094 ± .003 (2.39 ±0.08) 2x (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) A1 A2 A3 D-7P2 T .003 M A M .965 (24.51) .075 (1.91) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 5x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) 4 5 2 3 A1 A2 E-11P2 .003 M A M 1.115 (28.32) .075 (1.91) .075 (1.91) .2795 (7.10) .5575 (14.16) TYP TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 9x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2X) 6 7 8 9 2 3 A1 A2 E-19 .003 M A M 1.115 (28.32) .075 (1.91) TYP .075 (1.91) TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 19x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .5575 (14.16) 1 6 7 8 9 10 11 12 13 14 15 16 17 18 19 4 52 3 Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-27 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page E-7P3 .003 M A M 1.115 (28.32) .175 (4.45) .5575 (14.16) .2975 (7.56) 2x 2x .075 (1.91) TYP.0375 (0.95) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 4x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 3x) A1 A2 A3 F-15P2 .003 M A M.075 (1.91) .6325 (16.07) TYP .075 (1.91) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .352 (8.94) .0375 (0.95) TYP .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 1.265 (32.13) 1 6 7 8 9 10 11 12 13 4 52 3 A1 A2 F-23 .003 M A M 1.265 (32.13) .075 (1.91) TYP .075 (1.91) TYP .0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .6325 (16.07) 1 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 4 52 3 F-5P5 .6325 (16.07) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 1.265 (32.13) .175 (4.45) A1 A2 A3 A4 A5 G-33 .003 M A M 1.215 (30.86) .075 (1.91) .075 (1.91) .6075 (15.43) TYP TYP.0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x 1 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 4 52 3 Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-28 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page H-10P4 .003 M A M .003 M A M 1.800 (45.72) .075 (1.91) .900 (22.86) .236 (5.99) .0375 (0.95) TYP TYP .075 (1.91) TYP TYP .472 (11.99) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 6x) (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 4x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x A1 A2 A3 A4 4 5 H-29P7 .003 M A M .003 M A M 1.800 (45.72) .6125 .075 (1.91) .100 (2.54) .290 (7.37) TYP TYP TYP .050 (1.27) TYP TYP TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 22x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x) .900 (22.86) .075 (1.91) 8 9 11 12 14 15 17 18 20 21 224 52 3 A1 A2 A3 A4 A5 A6 A7 H-36P2 .003 M A M .003 M A M 1.800 (45.72) .075 (1.91) .075 (1.91) .900 (22.86) .944 (23.98) TYP .0375 (0.95) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 34x) (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 2x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x A1 A2 1 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 4 52 3 H-54P2 .003 M A M 1.800 (45.72) .075 (1.91) .075 (1.91) .900 (22.86) 1.160 (29.46 .580 (14.73) TYP .0375 (0.95) TYP TYP(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 52x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 4 52 3 44 45 46 47 48 49 50 51 5242 434140 H-5P5 .003 M A M 1.800 (45.72) .900 (22.86) .236 (5.99) (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 5x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x A1 A2 A3 A4 A5 Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-29 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page H-66 .003 M A M 1.800 (45.72) .075 (1.91) .075 (1.91) TYP .0375 (0.95) TYP TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 66x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x .900 (22.86) 1 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 4 52 3 34 39 40 41 42 43 44 45 46 47 48 4937 3835 36 50 55 56 57 58 59 60 61 62 63 64 65 6653 5451 52 J-17P4 .003 M A M.075 (1.91) .175 (4.45) TYP .075 (1.91) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 13x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .3725 (9.46) .0375 (0.95) TYP TYP .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) 1.615 (41.02) .8075 (20.51) 1 6 7 8 9 10 11 12 13 4 52 3 A2A1 A3 A4 J-25P2 .003 M A M .075 (1.91) TYP .075 (1.91) TYP(HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .5475 (13.91) .0375 (0.95) TYP .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 1.615 (41.02) .8075 (20.51) 1 6 7 8 9 10 11 124 52 3 A2A1 13 14 15 16 17 18 19 20 21 22 23 J-33 .003 M A M .075 (1.91) .075 (1.91) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .0375 (0.95) TYP 1.615 (41.02) .8075 (20.51) 1 6 7 8 9 10 11 124 52 3 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 J-7P7 .8075 (20.51) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 7x) 1.615 (41.02) .175 (4.45) 6x A2 A3 A4 A5 A6 A7A1 Rev. 04-July-2009

Dimensions in inches (millimeters) and are subject to change without notice. © 2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com G-30 E-Mail: sales@glenair.com Series 79 Micro-Crimp Section G: Right Angle Printed Circuit Board Connectors PCB Connectors A A B B C C D D E E F F G G H H INDEX INDEX 790-037S AND 790-042S PRINtED CIRCUIt BoARD PAttERNS Insert Arr. Component Mounting Side of PCB Mating Face of Connector is Toward Top of Page k-27P4 .003 M A M .003 M A M.075 (1.91) .175 (4.45) TYP .075 (1.91) TYP TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 23x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .5755 (14.62) .0375 (0.95) TYP (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 4x) 2.015 (51.18) .1.0075 (25.59) A2A1 A4A3 1 6 7 8 9 10 11 124 52 3 13 14 15 16 17 18 19 20 21 22 23 k-35P2 .003 M A M.075 (1.91) TYP .075 (1.91) (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 33x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .750 (19.05) .0375 (0.95) TYP .003 M A M (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 2x) 2.015 (51.18) .1.0075 (25.59) A2A1 1 6 7 8 9 10 11 124 52 3 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 k-43 .075 (1.91) TYP (HOLE TO ACCEPT .022 (0.56) MAX DIA CONTACT 43x) .003 M A M .094 ± .003 (2.39 ±0.08) 2x .0375 (0.95) TYP 2.015 (51.18) .1.0075 (25.59) 1 6 7 8 9 10 11 124 52 3 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 k-9P9 .003 M A M .175 (4.45) .1.0075 (25.59) .003 M A M .094 ± .003 (2.39 ±0.08) 2x (HOLE TO ACCEPT .064 (1.63) MAX DIA CONTACT 9x) 2.015 (51.18) A2 A3 A4 A5 A6 A7A1 A9A8 L-6P6 .003 M A M 2.036 (51.71) .428 (10.87) .236 (5.99) (HOLE TO ACCEPT .096 (2.44) MAX DIA CONTACT 6x) .003 M A M .125 ± .003 (3.18 ±0.08) 2x A1 A2 A3 A4 A5 A6 Rev. 04-July-2009