MC78M00_V01 ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

  • No External Components Required
  • Internal Thermal Overload Protection
  • Internal Short Circuit Current Limiting
  • Output Transistor SafeïArea Compensation
  • MC78M00A High Accuracy (±2%) Available for 5.0 V , 8.0 V , 12 V and 15 V
  • NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECïQ100 Qualified and PPAP Capable
  • These are PbïFree Devices

Figure 1. Representative Schematic Diagram This device contains 28 active transistors. dimensions section on page 10ï14 of this data sheet.

ORDERING INFORMATION

connected to Pin 2. Pin 1. Input 2. Ground 3. Output Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. MC AWLYWWG 78MxxXXT 1 2 xxxxxG ALYWW xx = Voltage Option XX = Appropriate Suffix Options A = Assembly Location WL = Wafer Lot Y = Year WW = Work Week G = Pb ïFree Package See general marking information in the device marking section on page 10 of this data sheet. DEVICE MARKING INFORMATION

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com MAXIMUM RATINGS (TA = 25°C, unless otherwise noted) (Note 1) Rating Symbol Value Unit Input Voltage (5.0 Vï18 V) (20 Vï24V) VI Vdc Power Dissipation (Package Limitation) Plastic Package, T Suffix TA = 25°C Thermal Resistance, Junction-to-Air Thermal Resistance, Junction-to-Case Plastic Package, DT Suffix TA = 25°C Thermal Resistance, Junction-to-Air Thermal Resistance, Junction-to-Case PD /C0113JA /C0113JC PD /C0113JA /C0113JC Internally Limited 5.0 Internally Limited 5.0 °C/W Operating Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg ï65 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. This device series contains ESD protection and ex ceeds the following tests: Human Body Model 2000 V per MILïSTDï883, Method 3015. Machine Model Method 200 V. MC78M05C/AC/B/AB, NCV78M05AB/B ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 2) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) MC78M05B/MC78M05C/NCV78M05B MC78M05AB/MC78M05AC/NCV78M05AB VO 4.8 4.9 5.0 5.0 5.2 5.1 Vdc Output Voltage Variation (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M05B/MC78M05C/NCV78M05B MC78M05AB/MC78M05AC/NCV78M05AB VO 4.75 4.80 ï ï 5.25 5.20 Vdc Line Regulation (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline ï 3.0 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 100 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 40 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 8.0 V ≤ VI ≤ 18 V) (IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.2 ï mV/°C Peak Output Current (T J = 25°C) IO ï 700 ï mA 2. T low = 0 °C for MC78MxxAC, C = ï40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com MC78M06C/B ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 3) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 Vdc Output Voltage Variation (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 5.7 ï 6.3 Vdc Line Regulation (TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline ï 5.0 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 Ma) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 120 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 45 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V) (IO = 300 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VI ï VO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.2 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA MC78M08C/AC/B/AB, NCV78M08B ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 3) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) MC78M08B/MC78M08C/NCV78M08B MC78M08AB/MC78M08AC VO 7.70 7.84 8.0 8.0 8.30 8.16 Vdc Output Voltage Variation (10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M08B/MC78M08C/NCV78M08B MC78M08AB/MC78M08AC VO 7.6 7.7 ï ï 8.4 8.3 Vdc Line Regulation (TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline ï 6.0 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 160 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 52 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 11.5 V ≤ VI ≤ 21.5 V) (IO = 300 mA, f = 120 Hz, 11.5 V ≤ VI ≤ 21.5 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.2 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA 3. T low = 0 °C for MC78MxxAC, C = ï40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com MC78M09C/B, NCV78M09B ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 8.64 9.0 9.45 Vdc Output Voltage Variation (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 8.55 ï 9.45 Vdc Line Regulation (TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Regline ï 6.0 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 180 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 52 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 12.5 V ≤ VI ≤ 22.5 V) (IO = 300 mA, f = 120 Hz, 12.5 V ≤ VI ≤ 22.5 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.2 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA MC78M12C/AC/B/AB, NCV78M12B ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 4) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) MC78M12B/MC78M12C/NCV78M12B MC78M12AB/MC78M12AC VO 11.50 11.76 12.50 12.24 Vdc Output Voltage Variation (14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M12B/MC78M12C/NCV78M12B MC78M12AB/MC78M12AC VO 11.4 11.5 ï ï 12.6 12.5 Vdc Line Regulation (TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Regline ï 8.0 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 240 120 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 75 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 15 V ≤ VI ≤ 25 V) (IO = 300 mA, f = 120 Hz, 15 V ≤ VI ≤ 25 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.3 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA 4. T low = 0 °C for MC78MxxAC, C = ï40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com MC78M15C/AC/B/AB, NCV78M15B ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) MC78M15B/MC78M15C/NCV78M15B MC78M15AB/MC78M15AC VO 14.4 14.7 15.6 15.3 Vdc Output Voltage Variation (17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M15B/MC78M15C/NCV78M15B MC78M15AB/MC78M15AC VO 14.25 14.40 ï ï 15.75 15.60 Vdc Input Regulation (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Regline ï 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 300 150 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.0 mA Quiescent Current Change (17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 90 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V) (IO = 300 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.3 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA MC78M18C/B ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5 W, unless otherwise noted) (Note 5) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.3 18 18.7 Vdc Output Voltage Variation (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 17.1 ï 18.9 Vdc Line Regulation (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Regline ï 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 360 180 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.5 mA Quiescent Current Change (21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 100 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V) (IO = 300 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.3 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA 5. T low = 0 °C for MC78MxxAC, C = ï40°C for MC78MxxAB, B, NCV78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C, NCV78MxxAB, B

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com MC78M20C/B ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc Output Voltage Variation (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 19 ï 21 Vdc Line Regulation (TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) Regline ï 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 400 200 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 6.5 mA Quiescent Current Change (23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 110 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V) (IO = 300 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.5 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA MC78M24C/B ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, TJ = Tlow to Thigh, PD ≤ 5.0 W, unless otherwise noted) (Note 6) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 Vdc Output Voltage Variation (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) VO 22.8 ï 25.2 Vdc Line Regulation (TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) Regline ï 10 50 mV Load Regulation (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) Regload ï ï 480 240 mV Input Bias Current (TJ = 25°C) IIB ï 3.2 7.0 mA Quiescent Current Change (27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) (5.0 mA ≤ IO ≤ 350 mA) /C0068IIB ï ï ï ï 0.8 0.5 mA Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn ï 170 ï /C0109V Ripple Rejection (IO = 100 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V) (IO = 300 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V, TJ = 25°C) RR ï ï ï dB Dropout Voltage (TJ = 25°C) VIïVO ï 2.0 ï Vdc Short Circuit Current Limit (TJ = 25°C) IOS ï 350 ï mA Average Temperature Coefficient of Output Voltage (IO = 5.0 mA) /C0068VO//C0068T ï ±0.5 ï mV/°C Peak Output Current (TJ = 25°C) IO ï 700 ï mA 6. T low = 0 °C for MC78MxxAC, C = ï40°C for MC78MxxAB, B Thigh = +125°C for MC78MxxAB, AC, B, C

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com Voltage Temperature Range Package Marking Shipping† MC78M05CDTG 5.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M05 75 Units / Rail MC78M05CDTRKG 5.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M05 2500 / Tape & Reel MC78M05ACDTRKG 5.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 8M05D 2500 / Tape & Reel MC78M05CTG 5.0 V TJ = 0° to +125°C TOï220 (PbïFree) 78M05CT 50 Units / Rail MC78M05ABDTG 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05A 75 Units / Rail MC78M05ABDTRKG 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05A 2500 / Tape & Reel NCV78M05ABDTRKG* 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05A 2500 / Tape & Reel MC78M05BDTG 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05B 75 Units / Rail MC78M05BDTRKG 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05B 2500 / Tape & Reel NCV78M05BDTRKG* 5.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M05B 2500 / Tape & Reel MC78M05BTG 5.0 V TJ = ï40° to +125°C TOï220 (PbïFree) 78M05BT 50 Units / Rail NCV78M05BTG* 5.0 V TJ = ï40° to +125°C TOï220 (PbïFree) 78M05BT 50 Units / Rail MC78M06CDTRKG 6.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M06 2500 / Tape & Reel MC78M08CDTRKG 8.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M08 2500 Units / Tape & Reel MC78M08BDTRKG 8.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M08B 2500 Units / Tape & Reel NCV78M08BDTRKG* 8.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M08B 2500 Units / Tape & Reel MC78M09CDTRKG 9.0 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M09 2500 Units / Tape & Reel MC78M09BDTRKG 9.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M09B 2500 Units / Tape & Reel NCV78M09BDTRKG* 9.0 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M09B 2500 Units / Tape & Reel MC78M12CDTG 12 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M12 75 Units / Rail MC78M12CDTRKG 12 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M12 2500 Units / Tape & Reel MC78M12ACDTRKG 12 V TJ = 0° to +125°C DPAKï3 (PbïFree) 8M12D 2500 Units / Tape & Reel MC78M12CTG 12 V TJ = 0° to +125°C TOï220 (PbïFree) 78M12CT 50 Units / Rail †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = ï40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECïQ100 Qualified and PPAP Capable.

MC78M00, MC78M00A, NCV78M00 Series www.onsemi.com ORDERING INFORMATION (continued) Output Device Shipping †Marking Package Temperature RangeVoltage MC78M12ABDTRKG 12 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M12A 2500 Units / Tape & Reel MC78M12BDTG 12 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M12B 75 Units / Rail MC78M12BDTRKG 12 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M12B 2500 Units / Tape & Reel NCV78M12BDTRKG* 12 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M12B 2500 Units / Tape & Reel MC78M12BTG 12 V TJ = ï40° to +125°C TOï220 (PbïFree) 78M12BT 50 Units / Rail MC78M15CDTG 15 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M15 75 Units / Rail MC78M15CDTRKG 15 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M15 2500 Units / Tape & Reel MC78M15ACDTRKG 15 V TJ = 0° to +125°C DPAKï3 (PbïFree) 8M15D 2500 Units / Tape & Reel MC78M15CTG 15 V TJ = 0° to +125°C TOï220 (PbïFree) 78M15CT 50 Units / Rail MC78M15ABDTRKG 15 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M15A 2500 Units / Tape & Reel NCV78M15BDTG* 15 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M15B 75 Units / Rail MC78M15BDTRKG 15 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M15B 2500 Units / Tape & Reel NCV78M15BDTRKG* 15 V TJ = ï40° to +125°C DPAKï3 (PbïFree) 8M15B 2500 Units / Tape & Reel MC78M18CDTRKG 18 V TJ = 0° to +125°C DPAKï3 (PbïFree) 78M18 2500 Units / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *NCV devices: Tlow = ï40°C, Thigh = +125°C. Guaranteed by design. NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECïQ100 Qualified and PPAP Capable.

TOï220, SINGLE GAUGE CASE 221ABï01 ISSUE A DATE 16 NOV 2010 SCALE 1:1 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. 4. PRODUCT SHIPPED PRIOR TO 2008 HAD DIMENSIONS S = 0.045 - 0.055 INCHES (1.143 - 1.397 MM) STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 2: PIN 1. BASE 2. EMITTER 3. COLLECTOR 4. EMITTER STYLE 3: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE STYLE 4: PIN 1. MAIN TERMINAL 1 2. MAIN TERMINAL 2 3. GATE 4. MAIN TERMINAL 2 STYLE 7: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. ANODE STYLE 10: PIN 1. GATE 2. SOURCE 3. DRAIN 4. SOURCE STYLE 5: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN STYLE 8: PIN 1. CATHODE 2. ANODE 3. EXTERNAL TRIP/DELAY 4. ANODE STYLE 6: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 9: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 11: PIN 1. DRAIN 2. SOURCE 3. GATE 4. SOURCE DIM MIN MAX MIN MAX MILLIMETERS INCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.020 0.024 0.508 0.61 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 1 2 3 D SEATING PLANE ïTï C ST U R J MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON23085DDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1TOï220, SINGLE GAUGE  Semiconductor Components Industries, LLC, 2019 www.onsemi.com

DPAK (SINGLE GAUGE) CASE 369C ISSUE F DATE 21 JUL 2015 SCALE 1:1 STYLE 1: PIN 1. BASE 2. COLLECTOR 3. EMITTER 4. COLLECTOR STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE 4. CATHODE STYLE 4: PIN 1. CATHODE 2. ANODE 3. GATE 4. ANODE STYLE 5: PIN 1. GATE 2. ANODE 3. CATHODE 4. ANODE STYLE 6: PIN 1. MT1 2. MT2 3. GATE 4. MT2 STYLE 7: PIN 1. GATE 2. COLLECTOR 3. EMITTER 4. COLLECTOR 1 2 STYLE 8: PIN 1. N/C 2. CATHODE 3. ANODE 4. CATHODE STYLE 9: PIN 1. ANODE 2. CATHODE 3. RESISTOR ADJUST 4. CATHODE STYLE 10: PIN 1. CATHODE 2. ANODE 3. CATHODE 4. ANODE b D E M0.005 (0.13) C A c C Z DIM MIN MAX MIN MAX MILLIMETERS INCHES D 0.235 0.245 5.97 6.22 E 0.250 0.265 6.35 6.73 A 0.086 0.094 2.18 2.38 b 0.025 0.035 0.63 0.89 c2 0.018 0.024 0.46 0.61 b2 0.028 0.045 0.72 1.14 c 0.018 0.024 0.46 0.61 e 0.090 BSC 2.29 BSC b3 0.180 0.215 4.57 5.46 L4 ïïï 0.040 ïïï 1.01 L 0.055 0.070 1.40 1.78 L3 0.035 0.050 0.89 1.27 Z 0.155 ïïï 3.93 ïïï NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DI- MENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. 7. OPTIONAL MOLD FEATURE. 1 2 3 XXXXXX = Device Code A = Assembly Location L = Wafer Lot Y = Year WW = Work Week G = Pb ïFree Package AYWW XXX XXXXXG XXXXXXG ALYWW Discrete IC 5.80 0.228 2.58 0.102 1.60 0.063 6.20 0.244 3.00 0.118 6.17 0.243 /C0466mm inches/C0467SCALE 3:1 GENERIC MARKING DIAGRAM* *For additional information on our PbïFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* H 0.370 0.410 9.40 10.41 A1 0.000 0.005 0.00 0.13 L1 0.114 REF 2.90 REF L2 0.020 BSC 0.51 BSC HDETAIL A SEATING PLANE A B C L H L2 GAUGE PLANE DETAIL A ROTATED 90 CW/C0053 e BOTTOM VIEW Z BOTTOM VIEW SIDE VIEW TOP VIEW ALTERNATE CONSTRUCTIONS NOTE 7 Z *This information is generic. Please refer to device data sheet for actual part marking. PbïFree indicator, “G” or microdot “/C0071”, may or may not be present. Some products may not follow the Generic Marking. MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON10527DDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1DPAK (SINGLE GAUGE) onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others.  Semiconductor Components Industries, LLC, 2018 www.onsemi.com

onsemi, , and other names, marks, and brands are registe red and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentïMarking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “asïis” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800ï282ï9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative