78M08A

MC78M00 MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

/C0077/C0067/C0055/C0056/C0077/C0048/C0048 /C0077/C0067/C0055/C0056/C0077/C0048/C0048/C0065 /C0083/C0101/C0114/C0105/C0101/C0115 SEMICONDUCTOR TECHNICAL DATA THREE–TERMINAL MEDIUM CURRENT POSITIVE FIXED VOLTAGE REGULATORS

ORDERING INFORMATION

TJ = – 40° to +125°C DPAK TO–220 Order this document by MC78M00/D MC78MXXACDT* XX Indicates nominal voltage. * Available in 5.0, 8.0, 12 and 15 V devices. DT–1 SUFFIX PLASTIC PACKAGE CASE 369 (DPAK) DT SUFFIX PLASTIC PACKAGE CASE 369A (DPAK) Pin 1. Input 2. Ground 3. Output T SUFFIX PLASTIC PACKAGE CASE 221A (TO–220) Heatsink surface connected to Pin 2. Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. MC78MXXACT* 1 2 1MOTOROLA ANALOG IC DEVICE DATA /C0084/C0104/C0114/C0101/C0101/C0045/C0084/C0101/C0114/C0109/C0105/C0110/C0097/C0108 /C0077/C0101/C0100/C0105/C0117/C0109 /C0067/C0117/C0114/C0114/C0101/C0110/C0116 /C0080/C0111/C0115/C0105/C0116/C0105/C0118/C0101 /C0086/C0111/C0108/C0116/C0097/C0103/C0101 /C0082/C0101/C0103/C0117/C0108/C0097/C0116/C0111/C0114/C0115 The MC78M00/MC78M00A Series positive voltage regulators are identical to the popular MC7800 Series devices, except that they are specified for only half the output current. Like the MC7800 devices, the MC78M00 three–terminal regulators are intended for local, on–card voltage regulation. Internal current limiting, thermal shutdown circuitry and safe–area compensation for the internal pass transistor combine to make these devices remarkably rugged under most operating conditions. Maximum output current, with adequate heatsinking is 500 mA.

• No External Components Required
• Internal Thermal Overload Protection
• Internal Short Circuit Current Limiting
• Output Transistor Safe–Area Compensation
• MC78M00A High Accuracy (±2%) Available for 5.0 V, 8.0 V, 12 V and 15 V
• Previous Commerical Temperature Range has been extended to a Junction Temperature Range of –40°C to +125°C Representative Schematic Diagram This device contains 28 active transistors. 1.0 k 1.0 k Input 210 6.7 V 16 k 100 200300 3.6 k 6.4 k 520 6.0 k 2.0 k 3.9 k 6.0 k 2.8 k pF 5.6 k 3.0 k 1.0 k 300 20050 0.24 Gnd Output 10 pF 2.6 k DEVICE TYPE/NOMINAL OUTPUT VOLTAGE MC78M05AC 5.0 V MC78M09C 9.0 V MC78M18C 18 V MC78M05C 5.0 V MC78M12AC 12 V MC78M20C 20 V MC78M06C 6.0 V MC78M12C 12 V MC78M24C 24 V MC78M08AC 8.0 V MC78M15AC 15 V MC78M08C 8.0 V MC78M15C 15 V  Motorola, Inc. 1997 Rev 6

2 MOTOROLA ANALOG IC DEVICE DATA

MAXIMUM RATINGS (TA = 25°C, unless otherwise noted.) Rating Symbol Value Unit Input Voltage (5.0 V–18 V) VI 35 Vdc (20 V–24V) 40 Power Dissipation (Package Limitation) Plastic Package, T Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction–to–Air θJA 70 °C/W Thermal Resistance, Junction–to–Case θJC 5.0 °C/W Plastic Package, DT Suffix TA = 25°C PD Internally Limited Thermal Resistance, Junction–to–Air θJA 92 °C/W Thermal Resistance, Junction–to–Case θJC 5.0 °C/W Operating Junction Temperature Range TJ +150 °C Storage Temperature Range Tstg –65 to +150 °C NOTE: ESD data available upon request. MC78M05C/AC ELECTRICAL CHARACTERISTICS (VI = 10 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M05C 4.8 5.0 5.2 MC78M05AC 4.9 5.0 5.1 Output Voltage Variation VO Vdc (7.0 Vdc ≤ VI ≤ 20 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M05C 4.75 – 5.25 MC78M05AC 4.80 – 5.20 Line Regulation Reg line – 3.0 5.0 mV (TJ = 25°C, 7.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 20 100 (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 10 50 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 40 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 8.0 V ≤ VI ≤ 18 V) 62 – – (IO = 300 mA, f = 120 Hz, 8.0 ≤ VI ≤ 18 V, TJ = 25°C) 62 80 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.2 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C)

3MOTOROLA ANALOG IC DEVICE DATA MC78M06C ELECTRICAL CHARACTERISTICS (VI = 11 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 5.75 6.0 6.25 Vdc Output Voltage Variation VO 5.7 – 6.3 Vdc (8.0 Vdc ≤ VI ≤ 21 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Reg line – 5.0 50 mV (TJ = 25°C, 8.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 20 120 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 60 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (9.0 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 45 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V) 59 – – (IO = 300 mA, f = 120 Hz, 9.0 V ≤ VI ≤ 19 V, TJ = 25°C) 59 80 – Dropout Voltage VI – VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.2 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C) MC78M08C/AC ELECTRICAL CHARACTERISTICS (VI = 14 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M08C 7.70 8.0 8.30 MC78M08AC 7.84 8.0 8.16 Output Voltage Variation VO Vdc (10.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M08C 7.6 – 8.4 MC78M08AC 7.7 – 8.3 Line Regulation Reg line – 6.0 50 mV (TJ = 25°C, 10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 25 160 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 80 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (10.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 52 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V) 56 – – (IO = 300 mA, f = 120 Hz, 11.5 V ≤VI ≤ 21.5 V, TJ = 25°C) 56 80 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.2 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C)

4 MOTOROLA ANALOG IC DEVICE DATA

MC78M09C ELECTRICAL CHARACTERISTICS (VI = 15 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 8.64 9.0 9.45 Vdc Output Voltage Variation VO 8.55 – 9.45 Vdc (11.5 Vdc ≤ VI ≤ 23 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Reg line – 6.0 50 mV (TJ = 25°C, 11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 25 180 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 90 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (11.5 Vdc ≤ VI ≤ 25 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 52 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V) 56 – – (IO = 300 mA, f = 120 Hz, 12.5 V ≤VI ≤ 22.5 V, TJ = 25°C) 56 80 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.2 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C) MC78M12C/AC ELECTRICAL CHARACTERISTICS (VI = 19 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M12C 11.50 12 12.50 MC78M12AC 11.76 12 12.24 Output Voltage Variation VO Vdc (14.5 Vdc ≤ VI ≤ 27 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M12C 11.4 – 12.6 MC78M12AC 11.5 – 12.5 Line Regulation Reg line – 8.0 50 mV (TJ = 25°C, 14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 25 240 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 120 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (14.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 75 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V) 55 – – (IO = 300 mA, f = 120 Hz, 15 V ≤VI ≤ 25 V, TJ = 25°C) 55 80 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.3 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C)

5MOTOROLA ANALOG IC DEVICE DATA MC78M15C/AC ELECTRICAL CHARACTERISTICS (VI = 23 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO Vdc MC78M15C 14.4 15 15.6 MC78M15AC 14.7 15 15.3 Output Voltage Variation VO Vdc (17.5 Vdc ≤ VI ≤ 30 Vdc, 5.0 mA ≤ IO ≤ 350 mA) MC78M15C 14.25 – 15.75 MC78M15AC 14.40 – 15.60 Input Regulation Reg line – 10 50 mV (TJ = 25°C, 17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 25 300 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 150 Input Bias Current (TJ = 25°C) IIB – 3.2 6.0 mA Quiescent Current Change ΔIIB mA (17.5 Vdc ≤ VI ≤ 30 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 90 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V) 54 – – (IO = 300 mA, f = 120 Hz, 18.5 V ≤ VI ≤ 28.5 V, TJ = 25°C) 54 70 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.3 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C) MC78M18C ELECTRICAL CHARACTERISTICS (VI = 27 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 17.3 18 18.7 Vdc Output Voltage Variation VO 17.1 – 18.9 Vdc (21 Vdc ≤ VI ≤ 33 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Reg line – 10 50 mV (TJ = 25°C, 21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 30 360 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 180 Input Bias Current (TJ = 25°C) IIB – 3.2 6.5 mA Quiescent Current Change ΔIIB mA (21 Vdc ≤ VI ≤ 33 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 100 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V) 53 – – (IO = 300 mA, f = 120 Hz, 22 V ≤ VI ≤ 32 V, TJ = 25°C) 53 70 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.3 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C)

6 MOTOROLA ANALOG IC DEVICE DATA

MC78M20C ELECTRICAL CHARACTERISTICS (VI = 29 V, IO = 350 mA, –30°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 19.2 20 20.8 Vdc Output Voltage Variation VO 19 – 21 Vdc (23 Vdc ≤ VI ≤ 35 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Reg line – 10 50 mV (TJ = 25°C, 23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 30 400 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 200 Input Bias Current (TJ = 25°C) IIB – 3.2 6.5 mA Quiescent Current Change ΔIIB mA (23 Vdc ≤ VI ≤ 35 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 110 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V) 52 – – (IO = 300 mA, f = 120 Hz, 24 V ≤ VI ≤ 34 V, TJ = 25°C) 52 70 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C, VI = 35 V) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.5 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C) MC78M24C ELECTRICAL CHARACTERISTICS (VI = 33 V, IO = 350 mA, –40°C < TJ < 125°C, PD ≤ 5.0 W, unless otherwise noted.) Characteristics Symbol Min Typ Max Unit Output Voltage (TJ = 25°C) VO 23 24 25 Vdc Output Voltage Variation VO 22.8 – 25.2 Vdc (27 Vdc ≤ VI ≤ 38 Vdc, 5.0 mA ≤ IO ≤ 350 mA) Line Regulation Reg line – 10 50 mV (TJ = 25°C, 27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) Load Regulation Reg load mV (TJ = 25°C, 5.0 mA ≤ IO ≤ 500 mA) – 30 480 (TJ = 25°C, 5.0 mA ≤ IO ≤ 200 mA) – 10 240 Input Bias Current (TJ = 25°C) IIB – 3.2 7.0 mA Quiescent Current Change ΔIIB mA (27 Vdc ≤ VI ≤ 38 Vdc, IO = 200 mA) – – 0.8 Output Noise Voltage (TA = 25°C, 10 Hz ≤ f ≤ 100 kHz) Vn – 170 – µV Ripple Rejection RR dB (IO = 100 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V) 50 – – (IO = 300 mA, f = 120 Hz, 28 V ≤ VI ≤ 38 V, TJ = 25°C) 50 70 – Dropout Voltage VI–VO – 2.0 – Vdc (TJ = 25°C) Short Circuit Current Limit (TJ = 25°C) IOS – 50 – mA Average Temperature Coefficient of Output Voltage ΔVO /ΔT – ±0.5 – mV/°C (IO = 5.0 mA) Peak Output Current IO – 700 – mA (TJ = 25°C)

8 MOTOROLA ANALOG IC DEVICE DATA

Figure 3. Peak Output Current versus Figure 4. Dropout Voltage versus Figure 5. Ripple Rejection versus Frequency Figure 6. Ripple Rejection versus Output Current Figure 7. Bias Current versus Input Voltage Figure 8. Bias Current versus Output Current

10 MOTOROLA ANALOG IC DEVICE DATA

CASE 221A–06 (TO–220) ISSUE Y DT SUFFIX PLASTIC PACKAGE CASE 369A–13 (DPAK) ISSUE Y OUTLINE DIMENSIONS NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.570 0.620 14.48 15.75 B 0.380 0.405 9.66 10.28 C 0.160 0.190 4.07 4.82 D 0.025 0.035 0.64 0.88 F 0.142 0.147 3.61 3.73 G 0.095 0.105 2.42 2.66 H 0.110 0.155 2.80 3.93 J 0.018 0.025 0.46 0.64 K 0.500 0.562 12.70 14.27 L 0.045 0.060 1.15 1.52 N 0.190 0.210 4.83 5.33 Q 0.100 0.120 2.54 3.04 R 0.080 0.110 2.04 2.79 S 0.045 0.055 1.15 1.39 T 0.235 0.255 5.97 6.47 U 0.000 0.050 0.00 1.27 B Q H Z L V G N A K F 12 3 D SEATING PLANE–T– C ST U R J D A K B RV S F L G 2 PL M0.13 (0.005) T E C U J H –T– SEATING PLANE Z DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.250 5.97 6.35 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.033 0.040 0.84 1.01 F 0.037 0.047 0.94 1.19 G 0.180 BSC 4.58 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.102 0.114 2.60 2.89 L 0.090 BSC 2.29 BSC R 0.175 0.215 4.45 5.46 S 0.020 0.050 0.51 1.27 V 0.030 0.050 0.77 1.27 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 12 3

11MOTOROLA ANALOG IC DEVICE DATA OUTLINE DIMENSIONS DT–1 SUFFIX PLASTIC PACKAGE CASE 369–07 (DPAK) ISSUE L NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 123 V S A K –T– SEATING PLANE R B F G D 3 PL M0.13 (0.005) T C E J H DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.235 0.250 5.97 6.35 B 0.250 0.265 6.35 6.73 C 0.086 0.094 2.19 2.38 D 0.027 0.035 0.69 0.88 E 0.033 0.040 0.84 1.01 F 0.037 0.047 0.94 1.19 G 0.090 BSC 2.29 BSC H 0.034 0.040 0.87 1.01 J 0.018 0.023 0.46 0.58 K 0.350 0.380 8.89 9.65 R 0.175 0.215 4.45 5.46 S 0.050 0.090 1.27 2.28 V 0.030 0.050 0.77 1.27

12 MOTOROLA ANALOG IC DEVICE DATA

Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution;JAPAN : Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, P.O. Box 5405, Denver, Colorado 80217. 1–303–675–2140 or 1–800–441–2447 Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Customer Focus Center: 1–800–521–6274 Motorola Fax Back System – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 – http://sps.motorola.com/mfax/ HOME PAGE : http://motorola.com/sps/ MC78M00/D