78D20LG-TNA

78DXXL_17 UTC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

UNISONIC TECHNOLOGIES CO., LTD 78DXXL LINEAR INTEGRATED CIRCUIT www.unisonic.com.tw 1 of 8 Copyright © 2017 Unisonic Technologies Co., Ltd QW-R101-036.H 3-TERMINALS 0.5A POSITIVE VOLTAGE REGULATOR  DESCRIPTION The UTC 78DXXL family is monolithic fixed voltage regulator integrated circuit. They are suitabl e for applications that required supply current up to 0.5 A.  FEATURE * Output Current Up To 0.5 A * Fixed Output Voltage Of 5V, 6V, 8V, 9V, 12V, 15V and 18V Available * Thermal Overload Shutdown Protection * Short Circuit Current Limiting * Output Transistor SOA Protection  ORDERING INFORMATION Ordering Number Pin Assignment Lead Free Halogen Free Package 1 2 3 Packing 78DXXLL-AA3-R 78DXXLG-AA3-R SOT-223 I G O Tape Reel 78DXXLL-AB3-B-R 78DXXLG-AB3-B-R SOT-89 O G I Tape Reel 78DXXLL-TM3-T 78DXXLG-TM3-T TO-251 I G O Tube 78DXXLL-TN3-R 78DXXLG-TN3-R TO-252 I G O Tape Reel 78DXXLL-TNA-R 78DXXLG-TNA-R TO-252-3 I G O Tape Reel Note: 1. XX: Output Voltage, refer to Marking Information 2. Pin Code: I: Input G: GND O: Output

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 2 of 8 www.unisonic.com.tw QW-R101-036.H  MARKING INFORMATION PACKAGE VOLTAGE CODE MARKING SOT-223 SOT-89 TO-251 TO-252 TO-252-3 05: 06: 08: 09: 12: 15: 18: 12V 15V 18V

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 3 of 8 www.unisonic.com.tw QW-R101-036.H  BLOCK DIAGRAM GND OUTPUT INPUT R13 R17 R9 Z2 T12 T14 R19 R18 R12 R11 R10 T8 T9 T1 3 T10 R14 T11 T5 R15 T15 R16 R1 R2 T1 T2  TYPICAL APPLICATION CIRCUIT Note: Bypass capacitors are recommended for optimum stabili ty and transient response and should be located as close as possible to the regulators.

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 4 of 8 www.unisonic.com.tw QW-R101-036.H  ABSOLUTE MAXIMUM RATINGS (TJ=25°C, unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Input Voltage VIN 35 V Output Current IOUT 0.5 A SOT-223 8.3 SOT-89 2.3 Power Dissipation (TC=25°C) TO-251/TO-252 PD W Junction Temperature T J -20~ +150 °C Storage Temperature T STG -65 ~ +150 °C Notes: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.  THERMAL DATA PARAMETER SYMBOL RATINGS UNIT SOT-223 15 SOT-89 55 Junction to Case TO-251/TO-252 θJC 12.5 °C/W  ELECTRICAL CHARACTERISTICS (TJ=25°C, CI =0.33μF, CO=0.1μF, PD≤7W, unless otherwise specified) For 78D05L (VIN=10V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 100 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 50 mV VIN =7V~25V 100 mVLine Regulation ∆VOUT VIN =7.5~20V, IOUT=0.5A 100 mV Quiescent Current I Q I OUT=0.5A 8 mA VUT =7.5~20V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 40 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -0.6 mV/°C Ripple Rejection RR V IN =8~18V,f=120Hz 62 80 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 5 of 8 www.unisonic.com.tw QW-R101-036.H  ELECTRICAL CHARACTERISTICS (Cont.) For 78D06L (VIN=11V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 120 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 60 mV VIN=8~25V 120 mVLine Regulation ∆VOUT VIN=8.5~21V, IOUT=0.5A 120 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN =8.5~21V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 45 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -0.7 mV/°C Ripple Rejection RR V IN =9~19V,f=120Hz 59 75 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V For 78D08L (VIN=14V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 160 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 80 mV VIN =10.5~25V 160 mVLine Regulation ∆VOUT VIN =10.5~23V, IOUT=0.5A 160 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN =10.5~23V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 58 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -0.9 mV/°C Ripple Rejection RR V IN =11.5~21.5V, f=120Hz 56 72 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V For 78D09L (VIN=15V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 180 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 90 mV VIN =11.5~25V 180 mVLine Regulation ∆VOUT VIN =11.5~24V, IOUT=0.5A 180 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN=11.5~24V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 58 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -1.1 mV/°C Ripple Rejection RR V IN=12.5~22.5V,f=120Hz 56 72 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 6 of 8 www.unisonic.com.tw QW-R101-036.H  ELECTRICAL CHARACTERISTICS (Cont.) For 78D12L (VIN=19V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 240 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 120 mV VIN=14.5~30V 240 mVLine Regulation ∆VOUT VIN=14.6~27V, IOUT=0.5A 240 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN =14.5~30V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 75 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -1.5 mV/°C Ripple Rejection RR V IN =15~25V, f=120Hz 55 72 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V For 78D15L (VIN=23V, IOUT=0.5A, CI =0.33μF, CO=0.1μF,) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 300 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 150 mV VIN=18.5~30V 300 mVLine Regulation ∆VOUT VIN=17.5~30V, IOUT=0.5A 300 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN=17.5~30V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 90 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -1.8 mV/°C Ripple Rejection RR V IN=18.5~28.5V, f=120Hz 54 70 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN=VOUT+19V 250 mA Dropout Voltage V D 2 V For 78D18L (VIN=27V, IOUT=0.5A) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IOUT=5mA~0.5A 360 mVLoad Regulation ∆VOUT IOUT=5mA~200mA 180 mV VIN=21~33V 360 mVLine Regulation ∆VOUT VIN=21~33V, IOUT =0.5A 360 mV Quiescent Current I Q I OUT=0.5A 8 mA VIN=21.5~33V 1 mAQuiescent Current Change ∆IQ IOUT=5mA~0.5A 0.5 mA Output Noise Voltage e N 10Hz ≤f≤100kHz 110 μV Temperature coefficient of VOUT ∆VOUT/∆TI OUT=5mA -2.2 mV/°C Ripple Rejection RR V IN =22~32V,f=120Hz 53 69 dB Peak Output Current I PEAK 1.2 A Short-Circuit Current I SC V IN= 35V 250 mA Dropout Voltage V D 2 V

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 7 of 8 www.unisonic.com.tw QW-R101-036.H  TYPICAL CHARACTERISTICS Output Voltage, VOUT (V) Circuit Operating Current, IBIAS (mA) Bias Current vs. Junction Temperature Bias Current, IB (mA) Junction Temperature, TJ (°C) -25 -5 15 35 55 75 95 115 135 155 VIN=10V IOUT=0A 4.5 Output Voltage vs. Junction Temperature Output Voltage, VOUT (V) Junction Temperature, TJ (°C) -25 -5 15 35 55 75 95 115 135 155 4.6 4.7 4.8 4.9 5.1 5.2 5.3 5.4 5.5 VIN=10V IOUT=5.0mA 5.0 1.8 1.6 1.4 1.2 0.8 0.6 0.4 0.2 -40 -20 140120100806040200 1.6 1.4 1.2 0.8 0.6 0.4 0.2 360 3 6 91 2 1 5 1 821 24 27 3033 40 Input Voltage, VIN (V) Short Current, ISC (A) Short Current vs. Input Voltage Dropout Voltage, VD (V) Junction Temperature, TJ (°C) Dropout Voltage vs. Junction Temperature IOUT=0.1A IOUT=0A IOUT=0.5A

78DXXL LINEAR INTEGRATED CIRCUIT UNISONIC TECHNOLOGIES CO., LTD 8 of 8 www.unisonic.com.tw QW-R101-036.H UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in lif e support appliances, devices or systems where malfunction of these products can be reasonably expe cted to result in personal injury. Reproduction in whole or in part is prohibited without the prior writ ten consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.