7820R-085-FA-066

7820R EMCORE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

5 MHz-200 MHz Bandwidth Supports the

Return Path Application. Excellent RF Frequency, High RF Output. Low Noise (<1.0 pA/√Hz typ.) Low Power Dissipation (0.5 W max). RoHS Compliant Internal Prorietary Impedance Match Circuitry (75Ω) Robust Small Package with Single-Mode Fiber Pigtail and Connector Options Wide Operating Case Temp Range, -40O to + 85OC The 7820R RFoG return path optical receiver is a single-mode fiber pigtailed module featuring a low-noise, impedance-matched broadband photodiode and RF amplification. The device receives optical analog and/or digital signals for a range of return path, and delivers the corresponding RF electrical output. The 7820R exhibits excellent noise performance with values well above standards over the entire 200MHz bandwidth and case temperature specifications (-40°C to +85°C). Moreover, the proprietary impedance-match circuitry between the photodetector and RF amplification stages resolves a number of OEM design obstacles. The device’s noise performance is typically less than 0.75pA/√Hz for the 85MHz version and 1pA/√Hz for the 200MHz version. The 7820R RFoG return path optical receiver can be used in the optical wavelength range from 1260nm – 1620nm applications. The 7820R is compliant with all criteria of the Restriction of the Use of Hazardous Substances in Electrical and Electronic Equipment (RoHS) guidelines 2002/95/EC. Performance Highlights Parameter Limits Frequency Range 5 – 200 MHz Noise 5 – 85MHz Version 5 – 200MHz Version 0.75 pA/√Hz (typ) 1.0 pA/√Hz (typ) DSO (20% OMI/tone) -60 dBc (typ) DTO (20% OMI/tone) -50 dBc (typ) Optical Input Power Up to -10dBm Wavelength 1260 – 1620 nm Power Consumption 0.5 W 7820R Optical Receiver 5-200 MHz RFoG Return Path

DATASHEET | MARCH 2012 FIBER OPTICS | REV 2012.03 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability. Parameter Symbol Min Max Unit Operating Case Temperature Range T CASE -40 85 °C Storage Temperature Range Tstg -40 85 °C Humidity at 85 °C RH -- 85 % Note: For all tables, typical values are performed at 25oC; min and max values are performance vs. temperature. Electrical/Optical Characteristics Parameter Symbol Min Typ Max Unit Optical Power 5 – 85MHz Version 5 – 200MHz Version PIN -10 dBm Optical Return Loss RLOPT 40 -- -- dB DC Power +5V Amp Bias, (Pin 2) +12V PD Bias, (Pin 6) ICCA ICCP 100 mA mA Wavelength λ 1260 1310/1550 1620 nm Responsivity -- -- >0.8 at 1310 nm >0.9 at 1550 nm mA/mW mA/mW PDI Monitor Voltage VMON -- 10 -- V/mA Dissipation P DISS -- -- 0.5 W RF Characteristics Parameter Symbol Min Typ Max Unit Frequency Response BW 5 -- 85 MHz Gain (Ref @ 5MHz) 5 – 85MHz Version 5 – 200MHz Version G dB Gain Stability Ripple -- -- 1 1.2 dBpk-pk Gain Tilt (3) -- -- 1 2 dB RF Output Level (2) 5-85 MHz Version 5 – 200 MHz Version RFOUT dBmV/ch 7820R Optical Receiver 5-200 MHz RFoG Return Path

DATASHEET | MARCH 2012 FIBER OPTICS | REV 2012.03 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. RF Characteristics (continued) Parameter Symbol Min Typ Max Unit Output Return Loss RL -- -- -16 dB Equivalent Input Noise 5 – 85MHz Version 5 – 200MHz Version EIN -- 0.75 1.0 0.9 1.30 pA/√Hz Discrete Second-Order (1,2) DSO -- -60 -50 dBc Discrete Third Order (1,2) DTO -- -70 -60 dBc (1). Two laser test at 1310 nm/1550 nm. 40% OMI/tone (before combined). Distortion products measured at 40 and 85 MHz. (2). 5 – 85MHz Version, Optical Input = -10dBm, OMI = 20% (after combined) 5 – 200MHz Version, Optical Input = -7dBm, OMI = 20% (after combined) (3). Tilt is defined as the delta between 5 – 85MHz for 7820R-085 and 5 – 200MHz for 7820R-200. Outline Drawing (dimensions are in inches & mm) 7820R Optical Receiver 5-200 MHz RFoG Return Path

DATASHEET | MARCH 2012 FIBER OPTICS | REV 2012.03 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. 7820R Optical Receiver 5-200 MHz RFoG Return Path

DATASHEET | MARCH 2012 FIBER OPTICS | REV 2012.03 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Pin Definitions Pin Function

1 GND

3 GND

4 RF OUT

5 GND

7 PD MONITOR

8 GND

5-200 MHz RFoG Return Path

DATASHEET | MARCH 2012 FIBER OPTICS | REV 2012.03 Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice. Ordering Code Definitions 7820R-xxx-yy-zzz Family Name 7820R: RFoG Return Path Optical Receiver Optical Connector yy = FA: FC/APC yy = SA: SC/APC yy = SU: SC/UPC yy = LU: LC/UPC yy = LA: LC/APC 7820R Optical Receiver 5-200 MHz RFoG Return Path Fiber Length (L) zzz = 115: 1.15 ± 0.30m fiber zzz = 066: 0.66 ± 0.02m fiber zzz = 054: 0.54 ± 0.02m fiber Example: 7820R-085-SA-115: RFoG Return Path Receiver, 5-85 MHz, SC/APC Connector, 1.15m Fiber Bandwidth xxx = 085: 5 – 85 MHz xxx = 200: 5 – 200 MHz