778033-01 NI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
NI PCI-GPIB+, NI PCIe-GPIB+, NI PCIe-GPIB+ Low-Profile (LP) GPIB Analyzers for PCI and PCI Express Analyzer Hardware Monitor and control all GPIB lines◾◾ Capture GPIB events including ◾◾ event timestamping Large FIFO for high-speed captures◾◾ Hardware triggering◾◾ Variable handshake rate◾◾ Capture GPIB handshake ◾◾ line transitions Analyzer Software Easy-to-use graphical application◾◾ Selective GPIB event capture◾◾ Several windows for capture buffer ◾◾ and capture display Several data display formats◾◾ Captured data searchable ◾◾ for specified GPIB pattern Capture event markers for easy ◾◾ analysis and benchmarking Selective captured event printing◾◾ Software can run concurrently ◾◾ with GPIB applications Controller IEEE 488.2 and HS488 compatible◾◾ Jumperless, software configurable◾◾ Plug-and-play compatible◾◾ Operating Systems Windows Vista (32- and 64-bit)/XP/2000◾◾ Driver Software (included) NI-488.2◾◾ GPIB analyzer◾◾ Overview The NI PCI-GPIB+, PCIe-GPIB+, and PCIe-GPIB+/LP devices include a complete GPIB analyzer and GPIB controller on a single device. Compatible with HS488, these devices are lower-cost alternatives to purchasing two separate products for analyzer and controller functionality. You can use them to troubleshoot IEEE 488 software and hardware problems or control GPIB instruments. You can trigger on bus patterns or specific GPIB events and benchmark system performance with the built-in timestamping capabilities. Monitoring the Bus The GPIB analyzer software displays the current state of the GPIB at all times. The Bus Monitor window shows the real-time state of each of the 16 GPIB data and control lines. It displays the state of the eight data lines in ASCII, hexadecimal, and binary formats and the state of the eight control lines in the binary format. The window displays the binary format as a series of LEDs, one for each GPIB line represented. Each GPIB data and control line has a corresponding toggle switch you can use to assert one or more of these lines at any time. Using these switches, you can exercise simple control over the GPIB, such as stepping through the states of the source or acceptor handshake. The Accept Byte button performs a single acceptor handshake sequence. The GPIB analyzer software offers several options for capturing and analyzing activity on the GPIB. You enable the capture by using the Capture button in the Action window. When the analyzer is capturing, it continually samples the GPIB and records the occurrence of user-specified GPIB events. You can configure the analyzer application to record captured information for any combination of the following GPIB events: Data transfers ◾◾ Command transfers◾◾ Control-line transition ◾◾ Handshake-line transition◾◾ Parallel-poll response◾◾ In addition, you can configure the analyzer application to continually reuse the capture buffer (treat it as a circular buffer) until you stop the capture operation. You can configure the analyzer application to participate in the IEEE 488.1 three-wire handshake while capturing. For nonintrusive captures, you can configure the analyzer application not to participate in the IEEE 488.1 three- wire handshake while capturing. Besides capturing the standard IEEE 488.1 three-wire handshake, the analyzer application can capture high-speed HS488 data transfers. If desired, you can configure the analyzer application to record timestamps with each captured event. Recorded timestamps have a 50 ns resolution. Sometimes you may want to focus a capture operation on a specific GPIB pattern that occurs at some unknown time. With the analyzer application, you can define a GPIB trigger condition and select the number of events to record
BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) FIFO A 32-byte first-in first-out (FIFO) memory buffer, integrated with the TNT ASIC, buffers data sent to or received from the GPIB. By buffering the data, you increase the data transfer rate because the I/O bus and the GPIB can overlap their respective accesses to the FIFO, rather than one bus waiting for the other to complete a cycle. IEEE 488 Interface Functions The NI PCI-GPIB+, PCIe-GPIB+, and PCIe-GPIB+/LP boards contain program registers that configure, control, and monitor all IEEE 488 interface functions. These functions are fully compatible with ANSI/IEEE Standard 488.2-1987. GPIB Transceivers Transceivers interface the NI PCI-GPIB+, PCIe-GPIB+, and PCIe-GPIB+/LP to the IEEE 488 bus. The transceivers, which are part of the TNT ASIC, provide power-up/power-down bus protection (glitch free).
Ordering Information
NI PCI-GPIB+, NI-488.2, and GPIB analyzer software for NI PCIe-GPIB+, NI-488.2, and GPIB analyzer software for NI PCIe-GPIB+/LP , NI-488.2, and GPIB analyzer software for BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/gpib. GPIB Analyzers for PCI and PCI Express
BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) GPIB Analyzers for PCI and PCI Express Specifications IEEE 488 Compatibility IEEE 488.1 and IEEE 488.2 compatible Capability Code Description SH1 Source Handshake AH1 Acceptor Handshake T5, TE5 Talker, Extender Talker L3, LE3 Listener, Extender Listener SR1 Service Request PP1, PP2 Local/Remote Parallel Poll RL1 Remote/Local C1, C2, C3, C4, C5 Controller E1, E2 Three-State Bus Drivers with Automatic Switch to Open Collector during Parallel Poll PCI Express Compatibility PCI Express 1.0a Maximum IEEE 488 Bus Transfer Rates IEEE 488 noninterlocked Actual rates depend on system configuration and instrument capabilities. GPIB Analyzer Performance Power Requirements PCI PCI Express Physical Dimensions I/O Connectors Operating Environment Tested in accordance with IEC-60068-2-1, IEC-60068-2-2, and IEC-60068-2-56. Storage Environment Tested in accordance with IEC-60068-2-1, IEC-60068-2-2, and IEC-60068-2-56. Compliance and Safety Visit ni.com/certification.
NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our NI Professional Services team is composed of NI applications and systems engineers and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select from available NI system driver sets and application development environments to create customized, reorderable software configurations. Your system arrives fully assembled and tested in one box with your software preinstalled. When you order your system with the standard program, you also receive system- specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system by providing three years of warranty coverage and calibration service. Use the online product advisors at ni.com/advisor to find a system assurance program to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for high- accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. SERVICE NEEDS M AINTAIN PLAN DEVELOPDEPLOY ni.com n 800 813 3693 National Instruments n info@ni.com ©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, HS488, National Instruments, National Instruments Alliance Partner, NI, NI-488, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-10955-301-101-D