SG7800A ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 8
Technical content
05/01 Rev 1.4 LIN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 POSITIVE FIXED VOLTAGE REGULATOR The SG7800A/SG7800 series of positive regulators offer self contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to 50V (SG7800A series only). These units feature a unique on-chip trimming system to set the output voltages to within ±1.5% of nominal on the SG7800A series, ±2.0% on the SG7800 series. The SG7800A versions also offer much improved line and load regulation characteristics. Utilizing an improved Bandgap reference design, problems have been eliminated that are normally associated with the Zener diode references, such as drift in output voltage and large changes in the line and load regulation. All protective features of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used. Product is available in hermetically sealed TO-257, TO-3, TO39 and LCC packages. DESCRIPTION FEATURES
- •• •• Output voltage set internally to ± ±± ±±1.5% on SG7800A
- •• •• Input voltage range to 50V max. on SG7800A
- •• •• Two volt input-output differential
- •• •• Excellent line and load regulation
- •• •• Foldback current limiting
- •• •• Thermal overload protection
- •• •• Voltages available: 5V, 12V, 15V
- •• •• Available in surface mount package HIGH RELIABILITY FEATURES - SG7800A/7800 ♦ ♦♦ ♦♦ Available to MIL-STD - 883 ♦ ♦♦ ♦♦ MIL-M38510/10702BXA - JAN7805T ♦ ♦♦ ♦♦ MIL-M38510/10703BXA - JAN7812T ♦ ♦♦ ♦♦ MIL-M38510/10704BXA - JAN7815T ♦ ♦♦ ♦♦ MIL-M38510/10706BYA - JAN7805K ♦ ♦♦ ♦♦ MIL-M38510/10707BYA - JAN7812K ♦ ♦♦ ♦♦ MIL-M38510/10708BYA - JAN7815K ♦ ♦♦ ♦♦ Radiation data available ♦ ♦♦ ♦♦ LMI level "S" processing available SCHEMATIC DIAGRAM SG7800A/SG7800 * For normal operation the (VOS ) sense pin must be externally connected to the load.
05/01 Rev 1.4 LIN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 ABSOLUTE MAXIMUM RATINGS (Note 1) Device Input Voltage Input Voltage Differential Output Voltage Input Voltage (transient) (Note 3) (Output shorted to ground) 5V 35V 50V 35V 12V 35V 50V 35V 15V 35V 50V 35V POSITIVE REGULATOR Operating Junction Temperature -65°C to 150°C 300°C Note 1. Values beyond which damage may occur. THERMAL DATA K Package: T Package: L Package: Note A. Junction Temperature Calculation: TJ = TA + (PD x θJA). Note B. The above numbers for θJC are maximums for the limiting thermal resistance of the package in a standard mounting configuration. The θJA numbers are meant to be guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow. Note 3. Operation at high input voltages is dependent upon load current. When load current is less than 5mA, output will rise out of regulation as input- oiutput differential icreases beyond 30V. Note also from Figure 1, that maximum load current is reduced at high voltages. The 50V input rating of the SG140A series refers to ability to withstnd high line or transient conditions without damage. Since the regulator's maximum current capability is reduced, the output may fall out of regulation at high input voltages under nominal loading. FIGURE 1. PEAK OUTPUT CURRENT VS. INPUT - OUTPUT DIFFERENTIAL RECOMMENDED OPERATING CONDITIONS (Note 2) Note 2. Range over which the device is functional. CHARACTERISTIC CURVES Operating Junction Temperature Range:
05/01 Rev 1.4 LIN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 ELECTRICAL SPECIFICATIONS (Note 1) (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7805A/SG7805 with -55°C ≤ TA ≤ 150°C, VIN = 10V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) 5.0V POSITIVE REGULATOR SG7805A/SG7805 UnitsSG7805 SG7805A V mV mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV 5.00 5.00 5.00 2.0 1.0 175 5.20 5.35 5.35 0.8 0.5 0.5 2.5 3.3 2.0 1.2 0.7 Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown 4.80 4.65 4.65 1.5 0.5 Parameter Test Conditions TJ = 25°C VIN = 7.5V to 20V, TJ = 25°C VIN = 8V to 12V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T - Pkg: IO = 5mA to 500mA, TJ = 25°C VIN =8V to 20V Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W T - Pkg: IO = 5mA to 500mA, P ≤ 2W Over Temperature Range TJ = 25°C With Line: VIN = 8V to 25V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ΔVO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA Power Pkgs: VIN = 10V, TJ = 25°C T - Pkg: VIN = 10V, TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T - Pkg: VIN = 35V, TJ = 25°C ΔVIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100KHz (Note 2) 1000hrs. at TJ = 125°C IO = 5mA 5.00 5.00 5.00 2.0 1.0 175 5.08 5.15 5.15 0.8 0.5 0.5 2.5 3.3 2.0 1.2 0.7 4.92 4.85 4.85 1.5 0.5 Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing. 2. This test is guaranteed but is not tested in production.
05/01 Rev 1.4 LIN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 12V POSITIVE REGULATOR ELECTRICAL SPECIFICATIONS (Note 1) (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7812A/SG7812 with -55°C ≤ TA ≤ 150°C, VIN = 19V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µ F. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) SG7812A/SG7812 UnitsSG7812 SG7812ATest ConditionsParameter TJ = 25°C VIN = 14.5V to 30V, TJ = 25°C VIN = 16V to 22V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T - Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = 15.5V to 27V Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W T - Pkg: IO = 5mA to 500mA, P ≤ 2W Over Temperature Range TJ = 25°C With Line: VIN = 15V to 30V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ΔVO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA Power Pkgs: TJ = 25°C T - Pkg: TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T - Pkg: VIN = 35V, TJ = 25°C ΔVIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100KHz (Note 2) 1000hrs. at TJ = 125°C IO = 5mA Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown 11.8 11.7 11.7 1.5 0.5 12.0 12.0 12.0 2.0 1.0 175 12.2 12.3 12.3 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 11.5 11.4 11.4 1.5 0.5 12.0 12.0 12.0 2.0 1.0 175 12.5 120 120 12.6 12.6 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 V mV mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing. 2. This test is guaranteed but is not tested in production.
05/01 Rev 1.4 LIN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 15V POSITIVE REGULATOR ELECTRICAL SPECIFICATIONS (Note 1) (Unless otherwise specified, these specifications apply over the operating ambient temperatures for SG7815A/SG7815 with -55°C ≤ TA ≤ 150°C, VIN = 23V, IO = 500mA for the K and IG -Power Packages-, IO = 100mA for the T and L packages, CIN = 0.33µF, and COUT = 0.1µF. Low duty cycle pulse testing techniques are used which maintains junction and case temperatures equal to the ambient temperature.) SG7815A/SG7815 UnitsSG7815 SG7815ATest ConditionsParameter TJ = 25°C VIN = 17.5V to 30V, TJ = 25°C VIN = 20V to 26V, TJ = 25°C Power Pkgs: IO = 5mA to 1.5A, TJ = 25°C IO = 250mA to 750mA, TJ = 25°C T - Pkg: IO = 5mA to 500mA, TJ = 25°C VIN = 18.5V to 30V Power Pkgs: IO = 5mA to 1.0A, P ≤ 20W T - Pkg: IO = 5mA to 500mA, P ≤ 2W Over Temperature Range TJ = 25°C With Line: VIN = 18.5V to 30V With Load: IO = 5mA to 1.0A (Power Pkgs.) IO = 5mA to 500mA (T) ΔVO = 100mV, TJ = 25°C Power Pkgs: IO = 1.0A, T - Pkg: IO = 500mA Power Pkgs: TJ = 25°C T - Pkg: TJ = 25°C Power Pkgs: VIN = 35V, TJ = 25°C T - Pkg: VIN = 35V, TJ = 25°C ΔVIN = 10V, f = 120Hz, TJ = 25°C f = 10Hz to 100KHz (Note 2) 1000hrs. at TJ = 125°C IO = 5mA Output Voltage Line Regulation (Note 1) Load Regulation (Note 1) Total Output Voltage Tolerance Quiescent Current Quiescent Current Change Dropout Voltage Peak Output Current Short Circuit Current Ripple Rejection Output Noise Voltage (rms) Long Term Stability Thermal Shutdown 14.8 14.6 14.6 1.5 0.5 15.0 15.0 15.0 2.2 0.9 175 15.2 100 15.4 15.4 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 14.4 14.3 14.3 1.5 0.5 15.0 15.0 15.0 2.2 0.9 175 15.6 150 150 15.7 15.7 0.8 0.5 0.5 2.5 3.3 1.7 1.2 0.7 V mV mV mV mV mV V V mA mA mA mA mA V A A A A dB µV/V mV Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing. 2. This test is guaranteed but is not tested in production.
05/01 Rev 1.4 L IN F IN ITY Microelectronics Inc. Copyright 1997 11861 Western Avenue ∞ ∞ ∞ ∞ ∞ Garden Grove, CA 92841 CONNECTION DIAGRAMS & ORDERING INFORMATION (See Notes Below) POSITIVE REGULATOR Part No.Package Connection Diagram 3-TERMINAL TO-3 METAL CAN K-PACKAGE SG78XXAK/883B -55°C to 125°C SG7805AK/DESC -55°C to 125°C SG7812AK/DESC -55°C to 125°C SG7815AK/DESC -55°C to 125°C SG78XXAK -55°C to 125°C SG78XXK/883B -55°C to 125°C JAN7805K -55°C to 125°C JAN7812K -55°C to 125°C JAN7815K -55°C to 125°C SG78XXK -55°C to 125°C SG78XXK 0°C to 125°C Ambient Temperature Range Note 1. Contact factory for JAN and DESC product availability. 2. All parts are viewed from the top. 3. "XX" to be replaced by output voltage of specific fixed regulator. 4. Some products will be available in hermetic flat pack (F). Consult factory for price and availability. 5. Both inputs and outputs must be externally connected together at the device terminals. 6. For normal operation, the V O SENSE pin must be externally connected to the load. 3-PIN TO-39 METAL CAN T-PACKAGE SG78XXAT/883B -55°C to 125°C SG7805AT/DESC -55°C to 125°C SG7812AT/DESC -55°C to 125°C SG7815AT/DESC -55°C to 125°C SG78XXAT -55°C to 125°C SG78XXT/883B -55°C to 125°C JAN7805T -55°C to 125°C JAN7812T -55°C to 125°C JAN7815T -55°C to 125°C SG78XXT -55°C to 125°C 3-PIN HERMETIC TO-257 IG-PACKAGE (Isolated) SG78XXAIG/883B -55°C to 125°C SG7805AIG/DESC -55°C to 125°C SG7812AIG/DESC -55°C to 125°C SG7815AIG/DESC -55°C to 125°C SG78XXAIG -55°C to 125°C SG78XXIG/883B -55°C to 125°C SG78XXIG -55°C to 125°C VOUT GROUND VIN CASE IS GROUND VOUT VIN VOUT VIN 3 2 GROUND CASE IS GROUND 20-PIN CERAMIC LEADLESS CHIP CARRIER L- PACKAGE SG7805AL/DESC -55 °C to 125°C SG7812AL/DESC -55 °C to 125°C SG7815AL/DESC -55 °C to 125°C SG78XXL/883B -55 °C to 125°C 321 20 19 11. N.C. 12. VOUT 13. N.C. 14. N.C. 15. V O SENSE 16. N.C. 17. V IN 18. N.C. 19. N.C. 20. N.C. 1. N.C. 2. VIN 3. N.C. 4. N.C. 5. N.C. 6. N.C. 7. GND 8. N.C. 9. N.C. 10. V OUT 9 1 11 21 310 (See Notes 5 & 6)
This datasheet has been download from: www.datasheetcatalog.com Datasheets for electronics components.