7803900

C195-QMQM-2M-AMBG COMMSCOPE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 24

Technical content

Datasheet sections

Wireless Product Solutions for North American market ERA® Ordering Guide Q4 2022

ERA C-RAN antenna system is built on C-RAN architecture that consolidates and simplifies distributed antenna system head-end resources and flexibly allocates capacity where and when it’s needed across the covered area through a simple drag-and-drop software interface. Cloud and centralized radio access networks (C-RAN) represent a shift in the way operators are managing wireless capacity. This breakthrough architecture offers substantial advantages in both capex and opex. ERA extends C-RAN advantages to in-building wireless solutions. Like a distributed antenna system, CommScope’s ERA C-RAN antenna system employs a network of interconnected antennas that provide users access to the wireless network. However, unlike traditional distributed antenna system solutions, CommScope’s C-RAN antenna system coordinates wireless capacity throughout a campus, office park or even a metro area from a centralized head-end location or even from operators’ existing C-RAN hubs. ERA® C-RAN Antenna System Benefits

• Consolidates baseband functions into a single, less complex head-end instead of requiring one in each building
• Flexibly and dynamically allocates baseband capacity across many buildings
• Requires less fiber and can even share fiber with other services for major deployment cost savings

Modular, Frequency Agnostic Building Blocks System Configuration

• All components support all frequency bands
• IT physical layer infrastructure converged
• Automatic configuration and dynamic optimization
• Advanced operational, optimization,and troubleshooting capabilities ERA makes it easy to deploy, confi gure and optimize in-building wireless solutions. A small set of frequency-independent building blocks is all that’s required for complete fl exibility and scalability, from small offi ce buildings to large, complex venues. CAN WIN TEN Head-End - Nodes Access Points - UAP and CAP UAP CAP L CAP M CAP H Fiber or Cat6A Fiber Cat6A

Head-End: Attenuators, e-POI Subrack and Modules ERA’s universal 4U e-POI rack supports up to 8 RF modules. Each e-POI module is capable of handling any frequency band and hosts 4 independent RF paths. Specifications - e-POI Subrack Electrical RF Modules 8 Interface Card 1 Mechanical Dimensions: Height x Width x Depth, mm (in) 4U x 482 x 395 (4U x 19 x 15.5) Weight, kg (lb) 7.7 (16.94) Operating Temperature, °C (°F) -5 to +50 (+23 to +122) Braided Assembly (C195-QMQM-1M-AMBG) Electrical Operational Frequency, MHz - e-POI RF Module 380 to 2700 Operational Frequency, MHz - e-POI HB Module 1700 – 4200 RF Input Power, dBm +46 Attenuation, dB 30 ±2 PIM @ 2x20 Watts (3rd order), dBc -160 typical -155 max Input Voltage, Vdc 12 Power Consumption, Watts per Module 10 Mechanical Connector RF input: 4.3-10 RF output: QMA Height x Width x Depth, mm (in) 170 x 50 x 440 Weight, kg (lb) 5.7 (12.5) Operating Temperature, °C (°F) -5 to +50 (+23 to +122) Specifications - e-POI Modules

Ordering Information

Description

e-POI Subrack Supports up to 8 RF modules e-POI Subrack with (1) Interface Card 7676311-01 e-POI Interface Card (IFC) 7676260-01 e-POI RF Module 7761433-00 e-POI Blank Module 7673474-01 e-POI RF Module High Band A7850159-00 RF Module (7761433-00) Subtrack (767311-01)

Head-End: Attenuators, e-POI Interface Card e-POI Interface Card (IFC) 7676260-01 Electrical Input Voltage, Vdc 12 Power Consumption, Watts 3.6 Mechanical Height x Width x Depth, mm (in) 170 x 35 x 390 (6.7 x 1.4 15.3) Weight, kg (lb) 0.5 (1.1) Operating Temperature, °C (°F) -5 to +50 (+23 to +122) Specifications Description Length CommScopeMaterial ID CNT Braided Cable Jumpers

50 Ohm, black non-halogenated, fire retardant polyolefin jacket, Dca s2 d2 compliant

0.6 meter C195-QMQM-M6-AMBG 1 meter C195-QMQM-1M-AMBG 2 meter C195-QMQM-2M-AMBG Accessories

Head-End: WCS Subracks Features:

• WCS subracks may be used as CANs, TENs or WINs
• All cards are used universally to support all frequency bands
• Universal slots recognize inserted cards
• Configuration, optimization, and upgrades are rendered from a GUI, either locally or remotely

(HxWxD) Product Code CommScope Material ID Wireless Communication Switch (WCS) Subracks

2 RU, 11 card slots 2 U x 482 x 450 mm WCS-2 7635443-01

4 RU, 19 card slots 4 U x 482 x 450 mm WCS-4 7635442-01

WCS Embedded Power Supply Unit Subrack, DC

2 RU, 11 card slots 2U x 482 x 450 mm WCS DC 2HU 7844067-00

4 RU, 19 card slots 4U x 482 x 450 mm WCS DC 4HU 7844068-00

Category 6A CommScope GigaSPEED® X10D®; or equivalent MM fiber CommScope LazrSPEED® ; or equivalent SM fiber CommScope TeraSPEED® ; or equivalent Electrical Input Voltage, Vdc Subrack: 12 Power over CAT: 57 Input Voltage, WCS, DC Subrack: -48vdc Power over CAT: Not Supported Power Consumption , Watts WCS-2 45 WCS-4 70 Mechanical Number of Card Slots WCS-2: 11 WCS-4: 19 Height x Width x Depth, mm (in) WCS-2: 2U x 482 x 450 (2U x 19” x 17.7) WCS-4: 4U x 482 x 450 (4U x 19” x 17.7) Weight, kg (lb) WCS-2: 7.6 (16.7) WCS-4: 10.8 (23.8) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) Specifications

Head-End: Modules/Cards 4 (RJ45) x 10 Gb-Ethernet links to UAP or copper CAP L CAT 7633228-02 Copper Transport Card (CAT2) 4 (RJ45) x 10 Gb-Ethernet links to copper UAP 2 and copper CAP L2 CAT2 7847569-00 RF Donor Card 4 (QMA Female) x analogue links to BTS RFD 7633229-05 RF Donor Card High Band 4 (QMA Female) x analogue links to BTS RFD-HB 7841277-00 Optical Transport Card 4 (SFP+ module*) x optical links to TEN, WIN or fiber CAP OPT 7642123-01 System User Interface Card Service ports for LMT, LAN and modem connect, 3 x RJ45, USB SUI 7642125-00 Blank Module, Universal Slot BP-UNV 7688866-00 Blank Module, Auxiliary Transport Slot BP-AUT 7688867-00 Blank Module, System User Interface Slot BP-SUI 7688868-00 BP-SUI BP-AUT BP-UNV Specifications Nokia CPRI Digital Donor Card (CDD) 6 x CPRI links to base band unit Nokia part sold by Nokia Electrical Input Voltage, Vdc 12 Power Consumption, Watts 40 CPRI Line Rates, Gbps Rate 3,5 and 7 Radio Access Technology LTE-FDD Number of Carriers per Port 1 to 4 Bandwidth Total, MHz 240 Mechanical Connection 6x SFP Module* Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.47 (1.045) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) *SFP+ ports sold separately

RF Donor Card (RFD) 4 x analogue links to BTS Electrical Operational Frequency, MHz 380 to 2700 RF Input Power, dBm -5 to +16 Bandwidth per Port, MHz 75 Bandwidth Total, MHz 320 RF Interface Rx, Tx, or Rx/Tx Input Voltage, Vdc 12 Power Consumption, Watts 45 Mechanical Connection 4x QMA female Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.54 (1.2) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) Copper Transport Card (CAT) 4 x 10 Gb-Ethernet links to UAP or CAP L Electrical Input Voltage, Vdc 12 Power Consumption, Watts 26 Power over Ethernet 2 circuits / port Number of UAP/Cap L supported 6 max. using cascading option Mechanical Connection 4x RJ45 Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.44 (0.96) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) Copper Transport Card (CAT2) 4 x 10 Gb-Ethernet links to UAP 2 or CAP L2 (dual link for PoE++) Electrical Input Voltage, Vdc 12 Power Consumption, Watts 26 Power over Ethernet 2 circuits / port Number of UAP/Cap L supported 6 max. using cascading option Mechanical Connection 4x RJ45 Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.44 (0.96) Operating Temperature, °C (°F) +5 to +40 (+41 to +104)

Optical Transport Card (OPT) 4 x optical links to TEN, WIN or fiber CAP Electrical Input Voltage, Vdc 12 Power Consumption, Watts 8 Mechanical Connection 4x SFP + module* Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.28 (0.61) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) *SFP+ ordered separately System User Interface (SUI) Service ports for LMT, LAN and modem connect Electrical Input Voltage, Vdc 12 Power Consumption, Watts 1.5 Mechanical Connection 3x RJ45, USB Height x Width x Depth, mm (in) 20 x 107 x 300 (0.8 x 4.2 x 11.8) Weight, kg (lb) 0.15 (0.33) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) RF Donor Card High Band (RFD HB) 4 x analogue links to BTS Electrical Operational Frequency, MHz 1700 to 4200 RF Input Power, dBm -5 to +16 Bandwidth per Port, MHz 100 Bandwidth Total, MHz 320 RF Interface Rx, Tx, or Rx/Tx Input Voltage, Vdc 12 Power Consumption, Watts 58 Mechanical Connection 4x QMA female Height x Width x Depth, mm (in) 20 x 145 x 300 (0.8 x 5.7 x 11.8) Weight, kg (lb) 0.54 (1.2) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) Specifications continued

Power Supply Unit Subrack, AC Accommodates 4 power supply units Dimensions (HxWxD) 1 RU x 483 x 495 mm PSU-SR-AC 7693531-00 Power Supply Units

12 Vdc, 100-240 Vac PSU-12V-AC 7663610-00

57 Vdc, 100-240 Vac PSU-57V-AC 7663468-00

Head-End: Power Supply Power Supply Unit Shelf PSU-57V-ACPSU-12V-AC ERA simplifies ordering with one universal power supply subrack and two standard power modules hosting 2x 12 Vdc and 2x 57 Vdc in a single shelf. Features:

• 1U height minimizes rack space usage
• Redundant 12 Vdc and 57 Vdc modules
• Hot-swapped functionality
• Powers WCS subracks, access points and connected devices
• PSU subrack and modules for each WCS subrack Specifications - Power Supply Subrack Electrical Use Modules 2 12 Vdc WCS 2 57 Vdc Power over CAT Redundancy Yes Current Share Yes Mechanical Connection IEC60320 C19 Height x Width x Depth, mm (in) 1U x 482 x 495 (1U x 19 x 19.5) Weight, kg (lb) 4.2 (9.2) Operating Temperature, °C (°F) +5 to +40 (+41 to +104) Specifications - Power Supply Units Electrical 12Vdc Module 57Vdc Module Input Voltage, Vac 85 to 264 85 to 264 Input Frequency Range, Hz 47 to 63 47 to 66 Output Voltage, Vdc 12 57 Output Power, Watts 90-132 Vac: 750 90-140 Vac: 1200 180-264 Vac: 1250 185-300 Vac: 2000 Mechanical Height x Width x Depth, mm (in) 42 x 100 x 285 (1.6 x 3.9 x 11.2) 42 x 100 x 350 (1.6 x 3.9 x 13.8) Weight, kg (lb) 1.4 (3.08) 2.3 (5.06) Operating Temperature, °C (°F) -10 to +55 (+14 to +131) -10 to +55 (+14 to +131)

Access Points - UAP and CAP The ERA access points offer a wide variety of customization options. They can be fitted with various antenna types and power levels to suit indoor, outdoor or mixed deployments. They feature external antenna ports for performance, aesthetics and signal shaping, and allow embedded MIMO support to deliver top data speeds. Features:

• A range of power levels to economically cover large indoor and outdoor spaces
• Outdoor and plenum ratings to allow widest variety of deployment scenarios
• Copper or fiber connections to suit short or long cable runs
• Power over category cable or remote power through hybrid fiber support
• Daisy-chaining capability for additional carrier access points or other IP device UAP2 CAP L CAP L2 CAP M CAP M2 C-band CAP MX CAP H Output Power +24 dBm 18/21 dBm per 60-125 mW +21 dBm 30 dBm per 1 W +34 dBm 29 dBm (< 1 GHz) 33 dBm 1900MHz and 2100MHz 30 dBm 2300MHz 32 dBm 2500MH 43 dBm Frequency Bands 4x Radio Modules MIMO2x2 4x Radio Modules MIMO2x2

4 Full C-Band 10 4

MIMO 2x2 External External External External External External Outdoor Rated No Yes Yes Yes Yes Yes Yes Plenum Rated No Yes Yes Yes Yes Yes Yes Network Connection Copper or Fiber Copper or Fiber Copper or Fiber Fiber Fiber Fiber Fiber MIMO Embedded Cascaded or Embedded Embedded Cascaded or Embedded Embedded SISO Cascaded or Embedded Cooling Active Passive or Active Passive Passive Passive Passive Active Cascading No Yes No Yes No No Yes Height x Width x Depth mm (in) 345 x 345 x 91 (13.58 x 13.53 x 3.58) 424 x 388 x 110 (16.69 x 15.28 x 4.33) 500 x 355 x 100 (19.685 x 13.976 x 3.937) 514 x 453 x 460 (20.24 x 17.83 x 6.30) 460 x 350 x 215 (18.11 x 13.78 x 8.465) 475 x 569 x 191 (18.7 x 22.4 x 7.5) 824 x 176 x 220 (32.44 x 6.93 x 8.66) Specifications Multiple Access Point Options

ERA Carrier Access Point Low Power ERA Carrier Access Point (CAP) feature external antenna ports for performance, aesthetics and signal shaping; and allow embedded MIMO support to deliver top data speeds.

Features

• Up to 21 dBm power to economically cover large indoor and outdoor spaces
• Outdoor and plenum ratings to allow widest variety of deployment scenarios
• Copper or fiber connections to suit short or long cable runs
• Power over CAT cable or remote power through hybrid fiber support
• Daisy-chaining capability for secondary CAP or other IP device such as a Wi-Fi access point or IP security camera

Connection Powered Fan Kit Product Code CommScope Material ID CAP L - Carrier Access Point for Low Power 4-Band Support AWS 1700 MIMO and WCS 2300 MIMO

Applications

CAT Without Fan Kit CAP L 17E/17E/23/23 C-PE 7770203-0004 Fiber Fed External DC Without Fan Kit CAP L 17E/17E/23/23 F-DC 7770203-0006 AWS 1700 MIMO and PCS 1900 MIMO CAT Without Fan Kit CAP L 17E/17E/19/19 C-PE 7770356-0004 Fiber Fed External DC Without Fan Kit CAP L 17E/17E/19/19 F-DC 7770356-0006 USA 700, USA 750, SMR 800, CEL 850, AWS 1700 and PCS

1900 Applications

CAT Without Fan Kit CAP L 7/80-85/17E/19 C-PE 7776596-0004 Fiber Fed External DC Without Fan Kit CAP L 7/80-85/17E/19 F-DC 7776596-0006 AWS 1700 MIMO, PCS 1900, WCS 2300 and TDD 2500 CAT Without Fan Kit CAP L 17E/19/23/25 C-PE 7776597-0004 Fiber Fed External DC Without Fan Kit CAP L 17E/19/23/25 F-DC 7776597-0006

ERA Carrier Access Point Medium Power ERA Carrier Access Points High Power CAP M - Carrier Access Point for Medium Power 4-Band Support USA 700, USA 750, SMR 800, CEL 850, AWS 1700, PCS 1900 Applications Fiber Fed AC CAP M 7E/80-85/17E/19 F-AC 7820478-0001 DC CAP M 7E/80-85/17E/19 F-DC 7820478-0002 WCS 2300 MIMO, and TDD 2500 MIMO Applications Fiber Fed AC CAP M 23/23/25/25 F-AC 7820689-0001 DC CAP M 23/23/25/25 F-DC 7820689-0002 Wide Band Medium Power supporting 600MHz-2700MHz Applications Fiber Fed AC CAP MX AC 7830127-0001 DC CAP MX DC 7830127-0002 Medium Power supporting Public Safety

400 UHF, 700MHz including FirstNet and

800MHz Public Safety Applications Fiber Fed AC CAP M 4/70/80F-AC 7828333-0001 DC CAP M 4/70/80F-DC 7828333-0002 CAP H- Carrier Access Point for High Power 4-Band Support AWS 1700 MIMO, PCS 1900 MIMO High Power Applications Fiber Fed AC CAP H 17E/17E/19/19 F-AC-F1 7825730-0002 DC CAP H 17E/17E/19/19 F-DC-F1 7825730-0004 WCS 2300 MIMO, BRS 2500 TDD MIMO High Power Application Fiber Fed AC CAP H 23/23/25T/25T F-AC-F1 7835476-0006 DC CAP H 23/23/25T/25T F-DC-F1 7835476-0008 USA 700, USA 750, SMR 800, CEL 850, AWS 1700, PCS 1900 High Power AC CAP H 7E/80-85/17E/19 F-AC-F1 7825719-0002 DC CAP H 7E/80-85/17E/19 F-DC-F1 7825719-0004

ERA Carrier Access Point with MIMO 2x2 Radio Module for Medium and Low Power C-Band Carrier Access Point with MIMO 2x2 Radio Module for Medium Power C-BAND Applications, Fiber Fed, AC Fiber Fed AC CAP M2 C-Band F-AC 7851671-1001 Carrier Access Point with MIMO 2x2 Radio Module for Medium Power C-BAND Applications, Fiber Fed, DC Fiber Fed DC CAP M2 C-Band F-DC 7851671-1002 Carrier Access Point with MIMO 2x2 Radio Module for Low Power C-BAND Applications, Fiber Fed, External DC Powered, without Fan Kit Fiber Fed DC CAP L2 C-Band F-DC 7845390-1018 Carrier Access Point with MIMO 2x2 Radio Module for Low Power C-BAND Applications, Copper Fed, Power over CAT Powered, without Fan Kit Copper Fed PoE CAP L2 C-Band C-PE 7845390-0018 ERA Carrier Access Point 5G C-Band Note: The above products are not released yet; please contact CommScope for further information Low power Meduim power

ERA New Generation Access Points The ERA New Generation Access Points feature embedded MIMO 2x2, modular Radio Modules for performance and aesthetics to deliver higher data speeds. They can be deployed indoor, outdoor, or mixed and offer various antenna types. Features:

• Modular, MIMO 2x2, band-specific Radio Module
• Copper or fiber network connection to suit short or long cable runs
• Power over category cable or local power through DC power supply unit UAP2 CAP L2 Output Power +24 dBm +21 dBm Frequency Bands 4x Radio Modules MIMO2x2 4x Radio Modules MIMO2x2 Antennas Embedded MIMO 2x2 External IP Rating IP20 IP68 Network Connection Copper or Fiber Copper or Fiber MIMO Embedded Embedded Cooling Active Passive Specifications Multiple Access Point Options CAP L2 Access Points

ERA New Generation Access Points Carrier access point with up to four MIMO 2x2 radio modules for low power AWS 1700, PCS 1900, WCS 2300 and TDD 2500 applications Fiber External DC CAP L2 17E/19/23/25T F-DC 7845390-1007 Carrier access point with MIMO 2x2 radio module to support for medium power USA 600, LMR 750, USA 700, USA, 750, SMR 800 and CEL 850 applications Fiber External DC CAP L2 6/7E/80-85 F-DC 7845390-1008 Carrier Access Point with up to four MIMO 2x2 Radio Module for Low Power AWS 1700, PCS 1900, WCS 2300, and TDD 2500 Applications, Copper Fed, Power over CAT Copper PoE CAP L2 17E/19/23/25T C-PE 7845390-0007 Carrier Access Point with MIMO 2x2 Radio Module to Support for Medium Power USA 600, LMR 750, USA 700, USA 750, SMR 800 and CEL 850 Applications, Copper Fed Copper PoE CAP L2 6/7E/80-85 C-PE 7845390-0008 Note: The above products are not released yet; please contact CommScope for further information.

UAP2 - Two radio module variants UAP2 supporting 2500 TDD and C-Band, Fiber fed Fiber External DC UAP2 25T/37T F-DC 7845389-1028 UAP2 supporting 3.45 DoD and C-Band, Fiber fed Fiber External DC UAP2 34T/37T F-DC Coming Soon UAP2 supporting AWS 1700 and PCS 1900, Fiber fed Fiber External DC UAP2 17E/19 F-DC 7845389-1025 UAP2 supporting 2500 TDD and C-Band, Power over CAT Copper PoE UAP2 25T/37T C-PE 7845389-0028 UAP2 supporting 3.45 DoD and C-Band, Power over CAT Copper PoE UAP2 34T/37T C-PE Coming Soon UAP2 supporting AWS 1700, and PCS 1900, Power over CAT Copper PoE UAP2 17E/19 C-PE 7845389-0025 UAP2 - Four radio module variants UAP2 supporting 2500 TDD, 3.45 DoD and C-Band, Fiber fed Fiber External DC UAP2 25T/34T/37T/37T F-DC Coming Soon UAP2 supporting AWS 1700, PCS 1900,

2500 TDD, and C-Band, Fiber fed Fiber External DC UAP2 17E/19/25T/37T F-DC 7845389-1031

UAP2 supporting LMR 750, USA 700, USA 750, AWS 1700, PCS 1900, and C-Band, Fiber fed Fiber External DC UAP2 7E/17E/19/37T F-DC 7845389-1032 UAP2 supporting SMR 800 and CEL 850, AWS 1700, PCS 1900, and C-Band, Fiber fed Fiber External DC UAP2 80-85/25T/34T/37T F-DC 7845389-1033 UAP2 supporting SMR 800 and CEL 850, AWS 1700, PCS 1900, and C-Band, Fiber fed Fiber External DC UAP2 80-85/17E/19/37T F-DC 7845389-1034 UAP2 supporting 2500 TDD, 3.45 DoD and C-Band, Power over CAT Copper PoE UAP2 25T/34T/37T/37T C-PE Coming Soon UAP2 supporting AWS 1700, PCS 1900, 2500 TDD, and C-Band, Power over CAT Copper PoE UAP2 17E/19/25T/37T C-PE 7845389-0031 UAP2 supporting LMR 750, USA 700, USA 750, AWS 1700, PCS 1900, and C-Band, Power over CAT Copper PoE UAP2 7E/17E/19/37T C-PE 7845389-0032 UAP2 supporting SMR 800 and CEL 850, 2500 TDD, 3.45 DoD and C-Band, Power over CAT Copper PoE UAP2 80-85/25T/34T/37T C-PE Coming Soon UAP2 supporting SMR 800 and CEL 850, AWS 1700, PCS 1900, and C-Band, Power over CAT Copper PoE UAP2 80-85/17E/19/37T C-PE 7845389-0034 UAP2 Access Points

Coarse Wavelength Division Multiplexing (CWDM) SFP+ CWDM Configuration

• 18 CWDM SFP+ (1270 to 1610)
• Placed in OPT card (WIN, CAN, TEN)
• Placed in CAP (fiber version) Different to analogue transmission for digital data-streams, CWDM is a very common approach to extend transport capacity while saving on fiber count or even not increasing the number of used fibers. ERA is using standard SFP+ modules for different distances (e.g. 10 km and 40 km) and different laser wave-length (e.g. 18 wave-length/colors). Even so ERA is in principle capable to work with almost any standard SFP+ module. CommScope is offering a selection of pre-qualified and approved SFP+ modules and MUX/DEMUX filters. The right selection of SFP+ colors together with the appropriate WDM-MUX/DEMUX provides the ERA WDM solution. CWDM MUX & DEMUX
• Passive
• Rack Mountable
• 2, 4, 8, 18 wavelength CWDM Add and Drop
• Passive
• Remote Unit Side Mountable
• 2 wavelength

Different to analogue transmission for digital data-streams, CWDM is a very common approach to extend transport capacity while saving on fiber count or even not increasing the number of used fibers. ERA is using standard SFP+ modules for different distances with almost any standard SFP+ module. CommScope is offering a selection of pre-qualified and approved SFP+ modules and MUX/DEMUX filters. The right selection of SFP+ colors together with the appropriate WDM-MUX/DEMUX provides the ERA WDM solution.

• 18 CWDM SFP+ (1270 to 1610)
• Placed in OPT card (WIN, CAN, TEN)
• Placed in CAP (fiber version)

10G BASE, LC (singlemode, 1310 nm) 7680813 10G BASE, LC (multimode, 850 nm) 7660511 SFP+ 10GBase CWDM, 40km SFP+ 10GBase CWDM-270 40km 7803247 SFP+ 10GBase CWDM-290 40km 7803249 SFP+ 10GBase CWDM-310 40km 7803291 SFP+ 10GBase CWDM-330 40km 7803293 SFP+ 10GBase CWDM-350 40km 7803295 SFP+ 10GBase CWDM-370 40km 7803298 SFP+ 10GBase CWDM-390 40km 7803900 SFP+ 10GBase CWDM-410 40km 7803902 SFP+ 10GBase CWDM-430 40km 7803904 SFP+ 10GBase CWDM-450 40km 7803906 SFP+ 10GBase CWDM-470 40km 7801330 SFP+ 10GBase CWDM-490 40km 7801340 SFP+ 10GBase CWDM-510 40km 7801342 SFP+ 10GBase CWDM-530 40km 7801344 SFP+ 10GBase CWDM-550 40km 7801360 SFP+ 10GBase CWDM-570 40km 7801363 SFP+ 10GBase CWDM-590 40km 7801365 SFP+ 10GBase CWDM-610 40km 7801367 Coarse Wavelength Division Multiplexing (CWDM) SFP+ SFP+ Multimode SFP+ Singlemode

Description CommScope Material ID MUX/DEMUX Rack with 3 Slots 7818375 MUX and DEMUX without Rack, 1 Slot 2-Wavelengths MUX (430-450) 7818377 DEMUX (430-450) 7818379 4-Wavelengths MUX (270-330) 7818451 DEMUX (270-330) 7818452 MUX (350-410) 7818453 DEMUX (350-410) 7818454 MUX (470-530) 7818459 DEMUX (470-530) 7818470 MUX (550-610) 7818471 DEMUX (550-610) 7818472 8-Wavelengths MUX (270-410) 7818455 DEMUX (270-410) 7818457 MUX (470-610) 7818473 DEMUX (470-610) 7818475 MUX and DEMUX with Rack 18-Wavelengths MUX (270-610) 7818477 DEMUX (270-610) 7818479 CWDM Fiber Optical Modules - Add/Drop CWDM Add/Drop Add1291nm/Drop1271nm 7830281 CWDM Add/Drop Add1331nm/Drop1311nm 7830283 CWDM Add/Drop Add1371nm/Drop1351nm 7830339 CWDM Add/Drop Add1411nm/Drop1391nm 7830341 CWDM Add/Drop Add1451nm/Drop1431nm 7830343 CWDM Add/Drop Add1491nm/Drop1471nm 7830345 CWDM Add/Drop Add1531nm/Drop1511nm 7830347 CWDM Add/Drop Add1571nm/Drop1551nm 7830349 CWDM Add/Drop Add1611nm/Drop1591nm 7830351 Fiber Module Mounting Kit 7832683-00 BiDi 40km Kit (Parts below are included) A7846857 Attenuator, LC/UPC, 7dB A7843668 10G BIDI SFP+ TX1270/RX1330 40km A7832204 10G BIDI SFP+ TX1330/RX1270 40km A7832206 CSFP 20km Kit (Parts below are included) A7846858 Fiber 3dB Attenuator LC/UPC, TAA A7843666 10G CSFP+-BiDi, TX1330/RX1270 20Km A7845629 10G SFP+, Bi-Di, 1270nmTx/1330nmRx, 20km A7845627 ERA Optical Modules continued

Indoor 19” Racks - 600x600 Rack 19" 24U 600x600x1200 open fr. basic 7845576 Rack 19" 24U 600x600x1200 open frame 7845577 Rack 19" 24U 600x600x1200 perf. d. basic 7845578 Rack 19" 24U 600x600x1200 perf. doors 7845579 Rack 19" 37U 600x600x1800 open fr. basic 7845580 Rack 19" 37U 600x600x1800 open frame 7845581 Rack 19" 37U 600x600x1800 perf. d. basic 7845582 Rack 19" 37U 600x600x1800 perf. doors 7845583 Rack 19" 46U 600x600x2200 open fr. basic 7845584 Rack 19" 46U 600x600x2200 open frame 7845585 Rack 19" 46U 600x600x2200 perf. doors 7845586 Rack TiRAX , 46U, 600x600 perf. doors 7845587 Indoor 19” Racks - 600x800 Rack 19" 24U 600x800x1200 open fr. basic 7845591 Rack 19" 46U 600x600x2200 perf. doors 7845592 Rack 19" 24U 600x800x1200 perf. d. basic 7845593 Rack 19" 24U 600x800x1200 perf. doors 7845595 Rack 19" 24U 600x800x1200 open fr. basic 7845591 Rack 19" 46U 600x600x2200 perf. doors 7845592 Rack 19" 24U 600x800x1200 perf. d. basic 7845593 Rack 19" 24U 600x800x1200 perf. doors 7845595 Rack 19" 46U 600x800x2200 open fr. basic 7845600 Rack 19" 46U 600x800x2200 open frame 7845601 Rack 19" 46U 600x800x2200 perf. d. basic 7845603 Rack 19" 46U 600x800x2200 perf. doors 7845602 Indoor 19” Racks - 800x800 Rack 19" 24U 800x800x1200 open fr. basic 7845604 Rack 19" 24U 800x800x1200 open frame 7845605 Rack 19" 24U 800x800x1200 perf. d. basic 7845606 Rack 19" 24U 800x800x1200 perf. doors 7845607 Rack 19" 37U 800x800x1800 open fr. basic 7845608 Rack 19" 37U 800x800x1800 open frame 7845609 Rack 19" 37U 800x800x1800 perf. d. basic 7845610 Rack 19" 37U 800x800x1800 perf. doors 7845611 Rack 19" 46U 800x800x2200 open fr. basic 7845612 Rack 19" 46U 800x800x2200 open frame 7845613 Rack 19" 46U 800x800x2200 perf. doors 7845614 Rack 19" 46U 800x800x2200 perf. doors 7845615 Wall Mount Racks Rack 19" 9U 600x700x530 perf. d. basic 7845616 Rack Vari IT , 9U, 600x700 perf. doors 7845617

Flat Mounting Kit 7774353-00 Dual Wall Mount Kit 7815440-00 Power Supply/Hybrid Fiber Mounting Kit 7774354-00 CAP L 240W Local AC Power Supply Kits No Cord 7775087-00 With Cord 7809798-00 CAP L Hybrid Fiber Splice Box Kit 7781091-00 Hybrid Fiber Splice Box Kit 7693816-00 CAP L Diplexer For 694-1880 & 1920-2700 MHz Outdoor Application 779139-00 CAP L Local Power Jumpers 0.5 meter 7774061 3 meter 7816237-00 Accessories Cap L with flat bracket kit for wall mounting Two CAP L units mounted in dual-mount wall bracket Local AC PSU + mounting bracket Hybrid fiber splice box + mounting bracket Diplexer for ERA ®

Description CommScope Material ID CAP M Mounting Kits Wall Mounting Bracket, Single (qty. 2) 7821955-00 Wall Mounting Bracket, Dual (qty. 2) 7821954-01 Pole Mounting bracket CAP M 7692096-01 Wooden Pole Mounting bracket CAP M 7696132-01 CAP H Mounting Kits Wall Mounting Kit 7661581 Pole Mounting Kit 7661538 Fiber Patch Cords Singlemode LC Duplex, 1 meter 7816313-00 Multimode LC Duplex, 1 meter 7779525 Singlemode LC Duplex, 3 meter 7816311-00 Multimode LC Duplex, 3 meter 7816312-00 CAP L2 Mounting Bracket (Two per box) A7848842 CAP M2 Mounting Bracket (Two per box) A7851753 CAP MX Mounting Brackets CAP MX Mounting Bracket Single 7847985-00 CAP MX Mounting Bracket Dual 7847984-00 *Note UAP2 and CAP L2 Mounting kits have not been released. Please contact your CommScope representative. Description CommScope Material ID CAP M Mounting Kits Wall Mounting Bracket, Single (qty. 2) 7821955-00 Wall Mounting Bracket, Dual (qty. 2) 7821954-01 Pole Mounting Bracket CAP M 7692096-01 Wooden Pole Mounting Bracket CAP M 7696132-01 Accessories Next Generation Accessories Wall mounting kit Pole mounting kit

commscope.com Visit our website or contact your local CommScope representative for more information. © 2022 CommScope, Inc. All rights reserved. All trademarks identified by ™ or ® are trademarks or registered trademarks in the US and may be registered in other countries. All product names, trademarks and registered trademarks are property of their respective owners. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. CommScope pushes the boundaries of communications technology with game-changing ideas and ground-breaking discoveries that spark profound human achievement. We collaborate with our customers and partners to design, create and build the world’s most advanced networks. It is our passion and commitment to identify the next opportunity and realize a better tomorrow. Discover more at commscope.com