778465-01 NI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

  • 16 analog inputs at up to 200 kS/s, 12 or 16-bit resolution
  • Up to 2 analog outputs at 10 kS/s, 12 or 16-bit resolution
  • 8 digital I/O lines (TTL/CMOS); two 24-bit counter/timers
  • Digital triggering
  • 4 analog input signal ranges
  • NI-DAQ driver that simplifies configuration and measurements Families
  • NI 6036E
  • NI 6034E
  • NI 6025E
  • NI 6024E
  • NI 6023E Operating Systems
  • Windows 2000/NT/XP
  • Real-time performance with LabVIEW
  • Others such as Linux ® and Mac OS X Recommended Software
  • LabVIEW
  • LabWindows/CVI
  • Measurement Studio
  • VI Logger Other Compatible Software
  • Visual Basic, C/C++, and C# Driver Software (included)
  • NI-DAQ 7 Overview and Applications National Instruments low-cost E Series multifunction data acquisition devices provide full functionality at a price to meet the needs of the budget-conscious user. They are ideal for applications ranging from continuous high-speed data logging to control applications to high-voltage signal or sensor measurements when used with NI signal conditioning. Synchronize the operations of multiple devices using the RTSI bus or PXI trigger bus to easily integrate other hardware such as motion control and machine vision to create an entire measurement and control system. Highly Accurate Hardware Design NI low-cost E Series DAQ devices include the following features and technologies: Temperature Drift Protection Circuitry – Designed with components that minimize the effect of temperature changes on measurements to less than 0.0010% of reading/°C. Resolution-Improvement Technologies – Carefully designed noise floor maximizes the resolution. Onboard Self-Calibration – Precise voltage reference included for calibration and measurement accuracy. Self-calibration is completely software controlled, with no potentiometers to adjust. NI DAQ-STC – Timing and control ASIC designed to provide more flexibility, lower power consumption, and a higher immunity to noise and jitter than off-the-shelf counter/timer chips. NI MITE – ASIC designed to optimize data transfer for multiple simultaneous operations using bus mastering with one DMA channel, interrupts, or programmed I/O. NI PGIA – Measurement and instrument class amplifier that guarantees settling times at all gains. Typical commercial off-the-shelf amplifier components do not meet the settling time requirements for high-gain measurement applications. PFI Lines – Eight programmable function input (PFI) lines that you can use for software-controlled routing of interboard and intraboard digital and timing signals. RTSI or PXI Trigger Bus – Bus used to share timing and control signals between two or more PCI or PXI devices to synchronize operations. RSE Mode – In addition to differential and nonreferenced single-ended modes, NI low-cost E Series devices offer the referenced single-ended (RSE) mode for use with floating-signal sources in applications with channel counts higher than eight. Onboard Temperature Sensor – Included for monitoring the operating temperature of the device to ensure that it is operating within the specified range. Family Bus Analog Inputs Input Resolution Max Sampling Rate Input Range Analog Outputs Output Resolution Output Rate Output Range Digital I/O Counter/Timers Triggers NI 6036E PCI, PCMCIA 16 SE/8 DI 16 bits 200 kS/s ±0.05 to ±10 V 2 16 bits 10 kS/s1 ±10 V 8 2, 24-bit Digital NI 6034E PCI 16 SE/8 DI 16 bits 200 kS/s ±0.05 to ±10 V 0 – – – 8 2, 24-bit Digital NI 6025E PCI, PXI 16 SE/8 DI 12 bits 200 kS/s ±0.05 to ±10 V 2 12 bits 10 kS/s1 ±10 V 8 2, 24-bit Digital NI 6024E PCI, PCMCIA 16 SE/8 DI 12 bits 200 kS/s ±0.05 to ±10 V 2 12 bits 10 kS/s1 ±10 V 8 2, 24-bit Digital NI 6023E PCI 16 SE/8 DI 12 bits 200 kS/s ±0.05 to ±10 V 0 – – – 8 2, 24-bit Digital 110 kS/s typical when using the single DMA channel for analog output. 1 kS/s maximum when using the single DMA channel for either analog input or counter/timer operations. 1 kS/s maximum for PCMCIA DAQCard devices in all cases.

Table 1. Low-Cost E Series Model Guide

for NI LabVIEW, LabWindows/CVI, or Measurement Studio. without replacing functions. (typically used in control loops) with NI-DAQ achieves rates of up to 50 kHz. before you begin development. creating your own custom scale. engineering units on a graph. visit ni.com/dataacquisition. Visit ni.com/oem for quantity discount information. assuming 100 pt averaging of data. 1Smallest detectable voltage change in the input signal at the smallest input range. Table 2. E Series Analog Input Absolute Accuracy Specifications Table 3. E Series Analog Output Absolute Accuracy Specifications

Low-Cost E Series Multifunction DAQ – 12 or 16-Bit, 200 kS/s, 16 Analog Inputs BUY ONLINE at ni.com or CALL (800) 813 3693 (U.S.) Recommended Accessories Signal conditioning is required for sensor measurements or voltage inputs greater than 10 V. National Instruments SCXI is a versatile, high-performance signal conditioning platform, intended for high-channel-count applications. NI SCC products provide portable, flexible signal conditioning options on a per-channel basis. Both signal conditioning platforms are designed to increase the performance and reliability of your DAQ system, and are up to 10 times more accurate than terminal blocks (please visit ni.com/sigcon for more details). Refer to the table below for more information: Sensor/Signals (>10 V) System Description DAQ Device Signal Conditioning High-performance PCI-60xxE, PXI-60xxE, DAQCard-60xxE SCXI Low-cost, portable PCI-60xxE, PXI-60xxE, DAQCard-60xxE SCC Signals (<10 V)1 System Description DAQ Device Terminal Block Cable Shielded PCI-60xxE SCB-68 SH6868-EP Shielded PXI-60xxE TB-2705 SH6868-EP Shielded DAQCard-60xxE SCB-68 SHC6868-EP Low-cost PCI-6025E/PXI-6025E Two TBX-68s SH1006868 Low-cost PCI-60xxE/PXI-60xxE CB-68LP R6868 Low-cost DAQCard-60xxE CB-68LP RC6868 1Terminal blocks do not provide signal conditioning (i.e., filtering, amplification, isolation, and so on), which may be necessary to increase the accuracy of your measurements. Table 4. Recommended Accessories

Ordering Information

Includes NI-DAQ driver software. BUY NOW! For complete product specifications, pricing, and accessory information, call (800) 813 3693 (U.S.) or go to ni.com/dataacquisition.

NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Training and Certification NI training is the fastest, most certain route to productivity with our products. NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. Professional Services Our Professional Services Team is comprised of NI applications engineers, NI Consulting Services, and a worldwide National Instruments Alliance Partner program of more than 600 independent consultants and integrators. Services range from start-up assistance to turnkey system integration. Visit ni.com/alliance. OEM Support We offer design-in consulting and product integration assistance if you want to use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Visit ni.com/ssp. Hardware Services NI Factory Installation Services NI Factory Installation Services (FIS) is the fastest and easiest way to use your PXI or PXI/SCXI combination systems right out of the box. Trained NI technicians install the software and hardware and configure the system to your specifications. NI extends the standard warranty by one year on hardware components (controllers, chassis, modules) purchased with FIS. To use FIS, simply configure your system online with ni.com/pxiadvisor. Calibration Services NI recognizes the need to maintain properly calibrated devices for high-accuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. SERVICE NEEDS © 2006 National Instruments Corporation. All rights reserved. CVI, DAQCard, LabVIEW, Measurement Ready, Measurement Studio, MITE, National Instruments, National Instruments Alliance Partner, NI, ni.com, RTSI, and SCXI are trademarks of National Instruments. Linux ® is the registered trademark of Linus Torvalds in the U.S. and other countries. Other pr oduct and company names listed ar e trademarks or trade names of their r espective companies. A National Instr uments Alliance Par tner is a business entity independent fr om NI and has no agency , partnership, or joint-ventur e relationship with NI. National Instruments • info@ni.com ni.com • (800) 813 3693 *342570A-01* 342570A-01 2006-6457-301-101-D