PNOZX4 PILZ | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 4

Technical content

Features

  • either monitored, unmonitored or automatic start possible
  • 1-channel or 2-channel wiring with or without shorts across contacts detection Approvals Technical data PNOZ X4 Electrical data Power supply AC: 24, 110, 115, 120, 230, 240 V DC: 24 V Tolerance 85 ... 110 % Power consumption Approx. 4.5 VA/2.5 W Voltage and current at input, 24 V DC, 40 mA start and feedback loop Output contacts 3 safety contacts (NO) 1 auxiliary contact (NC) Switching capability according to EN 60947-4-1, 02/01 AC1: 240 V/8 A/2000 VA DC1: 24 V/8 A/200 W EN 60947-5-1, 11/97 (DC13:6 cycles/min) AC15: 230 V/5 A; DC13: 24 V/7 A Contact protection according to 10 A quick or 6 A slow EN 60947-5-1, 08/00 Times Pickup delay monitored start: max. 100 ms auto./man. start: max. 0,35 s Delay-on de-energisation at EMERGENCY STOP: max. 50 ms at mains off: max. 0,5 s Recovery time approx. 1 s Simultaneity channel 1 and 2 /c165 Power failure buffer approx. 25 ms Mechanical data Max. cross-section of outer conductor 2 x 1.5 mm 2 oder 1 x 2.5 mm 2 single wire or multi-wire with end ferrule Dimensions (H x W x D) 87 x 45 x 121 mm Weight AC: 360 g, DC: 265 g

Description

  • 45 mm P-97 housing, on standard rail, snap-on
  • Relay outputs, positive-guided: – 3 safety contacts (NO) – 1 auxiliary contact (NC)
  • Connection possibilities for – EMERGENCY STOP switch – Safety gate limit switch – Start switch
  • LEDs for switching status Channel 1 and 2 and power supply
  • Contact multiplication and Contact amplification possible by external contactors Operating modes
  • Single channel mode
  • Dual channel mode without shorts across contacts detection
  • Dual channel mode with shorts across contacts detection
  • Automatic start
  • Manual start without monitoring
  • Manual start with monitoring PNOZ X4 NSG-D-2-128-12/01/MT80/MT105/MT108/MT122/MT32/MT71/MT109/MT98/MT72/MT32/MT38/MT32/MT67/MT111/MT46/MT44/MT32/MT70/MT101/MT108/MT105/MT120/MT45/MT87/MT97/MT110/MT107/MT101/MT108/MT45/MT83/MT116/MT114/MT97/MT223/MT101/MT32/MT50/MT44/MT32/MT55/MT51/MT55/MT54/MT48/MT32/MT79/MT115/MT116/MT102/MT105/MT108/MT100/MT101/MT114/MT110/MT44/MT32/MT71/MT101/MT114/MT109/MT97/MT110/MT121 /MT84/MT101/MT108/MT101/MT112/MT104/MT111/MT110/MT101/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT48/MT44/MT32/MT84/MT101/MT108/MT101/MT102/MT97/MT120/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT49/MT51/MT51/MT44/MT32/MT69/MT45/MT77/MT97/MT105/MT108/MT58/MT32/MT112/MT105/MT108/MT122/MT46/MT103/MT109/MT98/MT104/MT64/MT112/MT105/MT108/MT122/MT46/MT100/MT101

/MT80/MT105/MT108/MT122/MT32/MT71/MT109/MT98/MT72/MT32/MT38/MT32/MT67/MT111/MT46/MT44/MT32/MT70/MT101/MT108/MT105/MT120/MT45/MT87/MT97/MT110/MT107/MT101/MT108/MT45/MT83/MT116/MT114/MT97/MT223/MT101/MT32/MT50/MT44/MT32/MT55/MT51/MT55/MT54/MT48/MT32/MT79/MT115/MT116/MT102/MT105/MT108/MT100/MT101/MT114/MT110/MT44/MT32/MT71/MT101/MT114/MT109/MT97/MT110/MT121 /MT84/MT101/MT108/MT101/MT112/MT104/MT111/MT110/MT101/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT48/MT44/MT32/MT84/MT101/MT108/MT101/MT102/MT97/MT120/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT49/MT51/MT51/MT44/MT32/MT69/MT45/MT77/MT97/MT105/MT108/MT58/MT32/MT112/MT105/MT108/MT122/MT46/MT103/MT109/MT98/MT104/MT64/MT112/MT105/MT108/MT122/MT46/MT100/MT101 Emergency Stop Relays, Safety Gate Monitors Category 4, EN 954-1 PNOZ X4 – Legend S1/S2: EMERGENCY STOP or safety gate switch S3: Start switch actuated element gate not closed gate closed External wiring

  • Example 1 Single-channel EMERGENCY STOP wiring with automatic start S11 S12 S33 S12 S34S52 S21 S22 Y36 Y37
  • Example 3 Dual-channel EMERGENCY STOP wiring without shorts across contacts detection with monitored start S11 S12 S22 S34S52 S33S21S11 Y36 Y37
  • Example 6 Dual-channel safety gate control with shorts across contacts detection and monitored start S52 S34 S33S11S11 S22 S12 S21 Y36 Y37 Schematic interior diagram A1 A2 S34 Y1 S11 S22 Y2 41 S33 Y36 S12S11 13 33 14 34 Kanal Kanal Startkreis S52 AC DC UB Eingangskreis Start- kreis Sicherheits- kontakte Hilfskontakt Eingangskreis S12 S21 Y37nur am AC-Gerät Rückführ- kreis
  • Example 7 Dual channel light barrier control with shorts across contacts detection by BWS, with monitored start S11 S12 S22 S34S52 S33S21S11 Y36 Y37 BWS 24 V DC
  • Example 4 Single-channel safety gate control with unmonitored start S52 S34 S33S12S11 S22S12 S21 Y36 Y37
  • Example 2 Single-channel EMERGENCY STOP wiring with unmonitored start S11 S12 S33 S12 S34S52 S21 S22 Y36 Y37
  • Example 5 Dual-channel safety gate control without shorts across contacts detection with automatic start S34 S33S11 S52 S12 S11 S22 S21 Y36 Y37 Feedback- loop Start loop Input loop Safety contacts Auxiliary contactChannel Start loop Channel Only on AC device Input loop NSG-D-2-128-12/01

Emergency Stop Relays, Safety Gate Monitors Category 4, EN 954-1 PNOZ X4

  • Contact multiplication The output contacts can be amplified or multiplied by external contactors with positive-guided contacts if necessary. K5 K6 13Y1 Y2 1L1 1L2 NSG-D-2-128-12/01/MT80/MT105/MT108/MT122/MT32/MT71/MT109/MT98/MT72/MT32/MT38/MT32/MT67/MT111/MT46/MT44/MT32/MT70/MT101/MT108/MT105/MT120/MT45/MT87/MT97/MT110/MT107/MT101/MT108/MT45/MT83/MT116/MT114/MT97/MT223/MT101/MT32/MT50/MT44/MT32/MT55/MT51/MT55/MT54/MT48/MT32/MT79/MT115/MT116/MT102/MT105/MT108/MT100/MT101/MT114/MT110/MT44/MT32/MT71/MT101/MT114/MT109/MT97/MT110/MT121 /MT84/MT101/MT108/MT101/MT112/MT104/MT111/MT110/MT101/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT48/MT44/MT32/MT84/MT101/MT108/MT101/MT102/MT97/MT120/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT49/MT51/MT51/MT44/MT32/MT69/MT45/MT77/MT97/MT105/MT108/MT58/MT32/MT112/MT105/MT108/MT122/MT46/MT103/MT109/MT98/MT104/MT64/MT112/MT105/MT108/MT122/MT46/MT100/MT101

Emergency Stop Relays, Safety Gate Monitors Category 4, EN 954-1 PNOZ X4 NSG-D-2-128-12/01 General Technical Data Unless stated otherwise in the technical details for the specific unit Electrical Data Frequency Range AC 50 ... 60 Hz Residual Ripple DC 160 % Contact Material AgSnO 2 Continuous Duty 100 % Environmental Data EMC EN 50081-1, 01/92, EN 50082-2, 03/00 Vibration in accordance with Frequency: 10 ... 55 Hz, EN 60068-2-6, 01/00 Amplitude: 0.35 mm Climatic Suitability DIN IEC 60068-2-3, 12/86 Airgap Creepage DIN VDE 0110 part 1, 04/97 Ambient Temperature -10 ... +55 °C Storage Temperature -40 ... +85 °C Mechanical Data Torque Setting on Connection Terminals 0.6 Nm (screws) Mounting Position Any Housing Material Thermoplast Noryl SE 100 Protection Mounting: IP 54 Housing: IP 40 Terminal Range: IP 20 The units were tested in accordance with the relevant standards current at the time of development. Order References Type U B Order No. PNOZ X4 24 V DC 774 730 PNOZ X4 24 V AC 774 731 PNOZ X4 110 V AC 774 734 PNOZ X4 115 V AC 774 735 PNOZ X4 120 V AC 774 736 PNOZ X4 230 V AC 774 738 PNOZ X4 240 V AC 774 739 /MT80/MT105/MT108/MT122/MT32/MT71/MT109/MT98/MT72/MT32/MT38/MT32/MT67/MT111/MT46/MT44/MT32/MT70/MT101/MT108/MT105/MT120/MT45/MT87/MT97/MT110/MT107/MT101/MT108/MT45/MT83/MT116/MT114/MT97/MT223/MT101/MT32/MT50/MT44/MT32/MT55/MT51/MT55/MT54/MT48/MT32/MT79/MT115/MT116/MT102/MT105/MT108/MT100/MT101/MT114/MT110/MT44/MT32/MT71/MT101/MT114/MT109/MT97/MT110/MT121 /MT84/MT101/MT108/MT101/MT112/MT104/MT111/MT110/MT101/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT48/MT44/MT32/MT84/MT101/MT108/MT101/MT102/MT97/MT120/MT32/MT43/MT52/MT57/MT32/MT40/MT55/MT49/MT49/MT41/MT32/MT51/MT52/MT48/MT57/MT45/MT49/MT51/MT51/MT44/MT32/MT69/MT45/MT77/MT97/MT105/MT108/MT58/MT32/MT112/MT105/MT108/MT122/MT46/MT103/MT109/MT98/MT104/MT64/MT112/MT105/MT108/MT122/MT46/MT100/MT101