774-622.08-12 FOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Farnell Order Code: 1538952 FOX MODEL: FXO-PC735R-622.08 FOX Part Number: 774-622.08-12 LVPECL, CERAMIC, SMD, OSCILLATOR NOTE : The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Drawing Number: DWG-4553-8 Rev: 1 Size: A Part Number: 774-622.08-12 Cage: 61429 Draftsperson: AR Approved: BN Date: 01/15/2008 Page 1 of 1 LVPECL OUT#2 .01 F LVPECL OUT# 3GND # 4 E/D N C # 1 # 2 # 6 # 5 DDV +3.3V .01 F DDV -2V = +1.3V Specifications Parameter s Frequency 622.08 MHz Frequency Stability 1 ±50PPM Temperature Range Operating (TOPR) Storage (TSTG) -40°C ~ +85°C -55ºC ~ +125ºC Supply Voltage (VDD) 3.3V ± 5% Input Current (IDD) 120 mA Max Output Voltage (VOL) (VOH) 1.305V ~ 1.65V 2.055V ~ 2.405V Output Symmetry ( 50% Vp-p Level) 45% ~ 55% Rise Time (20% ~ 80% V p-p) (TR) Fall Time (80% ~ 20% V p-p) (TF) 400 pS Max 400 pS Max Output Load (Recommended Circuit below) 50 ohms into +1.3V Startup Time (TS) 10 ms Max Output Enable / Disable Time 2 100 nS Max Phase Jitter (12kHz ~ 20MHz) 0.96 pS Typ. Maximum Soldering Temp / Time 260°C / 10 Seconds Moisture Sensitivity Level (MSL) 1 Termination Finish Au

1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load

change, aging, shock, and vibration. 2An internal pullup resistor from pin 1 to pin 6 allows active output if pin 1 is left open. ENABLE/DISABLE FUNCTION2 Pin 1 OUTPUT (Pin 4, 5) OPEN 2 ACTIVE '1' Level VIH ≥ 70%VDD ACTIVE '0' Level VIL ≤ 30%VDD High Z NOTE: A 0.01µF bypass capacitor should be placed between VDD (Pin6) and GND (Pin 3) to minimize power supply line noise. RoHS Compliance Status: Compliant Mechanical / Dimensions ( millimeters): Pin Connections #1 E/D #4 Output 1 #2 NC #5 Output 2 #3 GND #6 VDD A. Recommended Circuit #3#2#1 #6 #5 #4 Recommended Solder Pad Layout 4.2 2.54 5.08 1.8 TOP VIEW PRESSX O #2#1 #3 #5#6 #4 5.08 2.54 1.4 2.6

1.5 Max

5 Max

7.5 Max

0.5 Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary