7733BC

TL7702B_06 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068 Power-On Reset Generator /C0068 Automatic Reset Generation After Voltage Drop /C0068 RESET Output Defined From VCC ≥ 1 V /C0068 Precision Voltage Sensor /C0068 Temperature-Compensated Voltage Reference /C0068 True and Complement Reset Outputs /C0068 Externally Adjustable Pulse Duration 32 1 2 0 1 9 91 01 1 1 2 1 3 NC SENSE NC RESET NC NC RESIN NC CT NC TL7705BM ...F K PACKAGE (TOP VIEW)NC REF NC RESET NC V NC NC GND NC CC REF RESIN CT GND VCC SENSE RESET RESET TL77xxBC ...D O R P PACKAGE TL7705BM . . . JG PACKAGE TL7705BQ ...D PACKAGE (TOP VIEW) 1 NC REF RESIN CT GND NC VCC SENSE RESET RESET TL7705BM ...U PACKAGE (TOP VIEW) NC – No internal connection NC – No internal connection description/ordering information The TL7702B, TL7705B, and TL7733B are integrated-circuit supply-voltage supervisors designed for use as reset controllers in microcomputer and microprocessor systems. The supply-voltage supervisor monitors the supply for undervoltage conditions at the SENSE input. During power up, the RESET output becomes active (low) when VCC attains a value approaching 1 V. As VCC approaches 3 V (assuming that SENSE is above VT+), the delay-timer function activates a time delay, after which outputs RESET and RESET go inactive (high and low, respectively). When an undervoltage condition occurs during normal operation, outputs RESET and RESET go active. To ensure that a complete reset occurs, the reset outputs remain active for a time delay after the voltage at the SENSE input exceeds the positive-going threshold value. The time delay is determined by the value of the external capacitor C T: td ≈ 2.6 × 104 × CT, where CT is in farads (F) and td is in seconds (s). An external capacitor (typically 0.1 µF) must be connected to REF to reduce the influence of fast transients in the supply voltage. The TL7702BC, TL7705BC, and TL7733BC are characterized for operation from 0°C to 70°C. The TL7702BI, TL7705BI, and TL7733BI are characterized for operation from –40°C to 85°C. The TL7705BQ is characterized for operation from –40°C to 125°C. The TL7705BM is characterized for operation from –55°C to 125°C. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. The TL7705BM is obsolete and no longer is supplied. Copyright  2003, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

description/ordering information (continued)

ORDERING INFORMATION

TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP (P) Tube of 50 TL7702BCP TL7702BCP SOIC (D) Tube of 75 TL7702BCD 7702BCSOIC (D) Reel of 2500 TL7702BCDR 7702BC PDIP (P) Tube of 50 TL7705BCP TL7705BCP 0°C to 70°C SOIC (D) Tube of 75 TL7705BCD 7705BCSOIC (D) Reel of 2500 TL7705BCDR 7705BC PDIP (P) Tube of 50 TL7733BCP TL7733BCP SOIC (D) Tube of 75 TL7733BCD 7733BCSOIC (D) Reel of 2500 TL7733BCDR 7733BC PDIP (P) Tube of 50 TL7702BIP TL7702BIP SOIC (D) Tube of 75 TL7702BID 7702BISOIC (D) Reel of 2500 TL7702BIDR 7702BI PDIP (P) Tube of 50 TL7705BIP TL7705BIP –40°C to 85°C SOIC (D) Tube of 75 TL7705BID 7705BISOIC (D) Reel of 2500 TL7705BIDR 7705BI PDIP (P) Tube of 50 TL7733BIP TL7705BIP SOIC (D) Tube of 75 TL7733BID 7733BISOIC (D) Reel of 2500 TL7733BIDR 7733BI –40°C to 125°C SOIC (D) Tube of 75 TL7705BQD TL7705BQD † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 functional block diagram The functional block diagram is shown for illustrative purposes only; the actual circuit includes a trimming network to adjust the reference voltage and sense-comparator trip point. RESIN ≈70 µA (see Note A) (see Note A) Reference Voltage 1 SENSE GND VCC CT RESET RESET REF Pin numbers shown are for the D, JG, and P packages. NOTE A: TL7702B: R1 = 0 Ω , R2 = open, Vx = VREF1 TL7705B: R1 = 23 kΩ , R2 = 10 kΩ , nominal, Vx ≈1.43 V TL7733B: R1 = 11.3 kΩ , R2 = 10 kΩ , nominal, Vx ≈1.43 V Reference Voltage 2 Vx typical timing diagram VIT– RESET Vres td VCC and SENSE td VIT– VIT+ VIT+ Vres ÎÎÎÎÎ ÎÎÎÎÎ ÎÎÎÎÎ Output Undefined ÎÎÎÎ ÎÎÎÎ Output Undefined The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values are with respect to the network ground terminal. 2. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions MIN MAX UNIT VCC Supply voltage 3.6 18 V VIH High-level input voltage RESIN 2 18 V VIL Low-level input voltage RESIN 0 0.8 V VI Input voltage SENSE 0 18 V IOH High-level output current RESET –20 mA IOL Low-level output current RESET 20 mA TL77xxBC 0 70 TA O perating free-air temperature range TL77xxBI –40 85 °CTA O erating free-air tem erature range TL7705BQ –40 125 TL7705BM –55 125 The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003 5POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 electrical characteristics over recommended operating conditions (unless otherwise noted) PARAMETER TEST CONDITIONS † TL77xxBC TL77xxBI TL7705BQ UNIT MIN TYP MAX VOH High-level output voltage, RESET IOH = –16 mA VCC –1.5 V VOL Low-level output voltage, RESET IOL = 16 mA 0.4 V Vref Reference voltage, REF Iref = –500 µA, TA = 25°C 2.48 2.53 2.58 V TL7702B 2.505 2.53 2.555 TL7705B TA = 25°C 4.5 4.55 4.6 VIT Negative-going input threshold voltage TL7733B 3.03 3.08 3.13 VVIT– input threshold voltage at SEN SE input TL7702B 2.48 2.53 2.58 V at SENSE in ut TL7705B TA = full range‡ 4.45 4.55 4.65 TL7733B A g 3 3.08 3.16 H t i SENSE TL7702B 10 Vhys Hysteresis, SENSE (VIT+– VIT ) TL7705B VCC = 3.6 V to 18 V, TA = 25°C 30 mVy (VIT+ – VIT–) TL7733B 10 Vres§ Power-up reset voltage IOL at RESET = 2 mA, TA = 25°C 1 V II Input current RESIN VI = 0.4 V to VCC –10 µAII Input current SENSE TL7702B VI = Vref to 18 V –0.1 –2 µA IOH High-level output current, RESET VO = 18 V, See Figure 1 50 µA IOL Low-level output current, RESET VO = 0 V, See Figure 1 –50 µA ICC Supply current VSENSE = 15 V, RESIN ≥ 2 V 1.8 3 mAICC Supply current VCC = 18 V, TA = full range‡ 3.5 mA † All electrical characteristics are measured with 0.1-µF capacitors connected at REF, CT, and VCC to GND. ‡ Full range is 0°C to 70°C for the C-suffix devices, –40°C to 85°C for the I-suffix devices, and –40°C to 125°C for the Q-suffix device. § This is the lowest voltage at which RESET becomes active. switching characteristics, VCC = 5 V, CT open, TA = 25°C PARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS TL77xxBC TL77xxBI TL7705BQ UNIT() () MIN TYP MAX tPLH Propagation delay time from low- to high-level output RESIN RESET See Figures 1, 2, and 3 270 500 ns tPHL Propagation delay time from high- to low-level output RESIN RESET See Figures 1, 2, and 3 270 500 ns t Effectivepulse duration RESIN See Figure 2 150 nstw Effective pulse duration SENSE See Figure 2 100 ns tr Rise time RESET See Figures 1 and 3 ns tf Fall time RESET See Figures 1 and 3 150 200 ns tr Rise time RESET See Figures 1 and 3 75 150 ns tf Fall time RESET See Figures 1 and 3 ns The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003

6 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

electrical characteristics over recommended operating conditions (unless otherwise noted) PARAMETER TEST CONDITIONS † TL7705BM UNITPARAMETER TEST CONDITIONS † MIN TYP MAX UNIT VOH High-level output voltage, RESET IOH = –16 mA VCC –1.5 V VOL Low-level output voltage, RESET IOL = 16 mA 0.4 V Vref Reference voltage, REF Iref = –500 µA, TA = 25°C 2.48 2.53 2.58 V TL7702B TA =2 5°C 2.505 2.53 2.555 VIT Negative-going input threshold voltage TL7705B TA = 25°C 4.5 4.55 4.6 VVIT– input threshold voltage at SEN SE input TL7702B T 55°Ct o1 2 5°C 2.48 2.53 2.58 V at SENSE in ut TL7705B TA = –55°C to 125°C 4.45 4.55 4.65 Vh H ysteresis, SENSE TL7702B VCC =36Vt o1 8V TA =2 5°C mVVhys (VIT+ – VIT–) TL7705B VCC = 3.6 V to 18 V, TA = 25°C mV Vres‡ Power-up reset voltage IOL at RESET = 2 mA, TA = 25°C 1 V II Input current RESIN VI = 0.4 V to VCC –10 µAII Input current SENSE TL7702B VI = Vref to VCC – 1.5 V –0.1 –2 µA IOH High-level output current, RESET VO = 18 V 50 µA IOL Low-level output current, RESET VO = 0 –50 µA ICC Supply current VSENSE = 15 V, RESIN ≥ 2 V 1.8 3 mAICC Supply current VCC = 18 V, TA = –55°C to 125°C 4 mA † All electrical characteristics are measured with 0.1-µF capacitors connected at REF, CT, and VCC to GND. ‡ This is the lowest value at which RESET becomes active. switching characteristics, VCC = 5 V, CT open, TA = 25°C PARAMETER FROM TO TEST CONDITIONS TL7705BM UNITPARAMETER (INPUT) (OUTPUT) TEST CONDITIONS MIN TYP MAX UNIT tPLH Propagation delay time from low- to high-level output RESIN RESET See Figures 1, 2, and 3 270 500* ns tPHL Propagation delay time from high- to low-level output RESIN RESET See Figures 1, 2, and 3 270 500* ns t Effectivepulse duration RESIN See Figure 2 150 nstw Effective pulse duration SENSE See Figure 2 100 ns tr Rise time RESET See Figures 1 and 3 75* ns tf Fall time RESET See Figures 1 and 3 150 200* ns tr Rise time RESET See Figures 1 and 3 75 150* ns tf Fall time RESET See Figures 1 and 3 50* ns * On products compliant to MIL-PRF-38535, these parameters are not production tested. The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003

8 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TYPICAL CHARACTERISTICS † Figure 4 6 02 4 681 0 t – Assertion Time – ns ASSERTION TIME vs LOAD RESISTANCE R L – Load Resistance – kΩ VCC = 5 V C T = 0.1 µF C L = 10 pF TA = 25°C RESET tr RESET tf Figure 5 400 200 100 02 4 681 0 t – Deassertion Time – ns 600 700 DEASSERTION TIME vs LOAD RESISTANCE 500 300 R L – Load Resistance – kΩ VCC = 5 V C T = 0.1 µF C L = 10 pF TA = 25°C RESET tf RESET tr RESET tr RESET tf Figure 6 0 25 50 75 100 125 t – Assertion Time – ns ASSERTION TIME vs LOAD CAPACITANCE 150 175 200 VCC = 5 V C T = 0.1 µF R L = 4.7 kΩ TA = 25°C RESET tr RESET tf C L – Load Capacitance – pF Figure 7 0.9 0.7 0.5 0.3 0 25 50 75 100 125 t – Deassertion Time – 1.1 1.3 DEASSERTION TIME vs LOAD CAPACITANCE 150 175 200 1.7 1.5 1.9 2.1 VCC = 5 V C T = 0.1 µF R L = 4.7 kΩ TA = 25°C RESET tf and RESET tr C L – Load Capacitance – pF µs † For proper operation, both RESET and RESET should be terminated with resistors of similar value. Failure to do so may cause unwanted plateauing in either output waveform during switching. The TL7705BM is obsolete and no longer is supplied.

TL7702B, TL7705B, TL7733B SUPPLY-VOLTAGE SUPERVISORS SLVS037M – SEPTEMBER 1989 – REVISED MAY 2003 9POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

APPLICATION INFORMATION

10 kΩ 0.1 µF SENSE RESIN GND REF RESET RESET VCC CT To System RESET R T C T System Supply Reset Input (from system) To System RESET(see text) 4 10 kΩ Figure 8. System Reset Controller With Undervoltage Sensing below V(CT), not when VSENSE falls below VT–. Using a 20%-tolerance resistor, RT should be greater than 560 Ω . of the supply-voltage fault condition. Both outputs of the TL770xB should be terminated with similar value resistors, even when only one is being used. undefined state or delay system reset.

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 5962-88685042A OBSOLETE LCCC FK 20 TBD Call TI Call TI 5962-8868504HA OBSOLETE CFP U 10 TBD Call TI Call TI 5962-88685052A OBSOLETE LCCC FK 20 TBD Call TI Call TI 5962-8868505HA OBSOLETE CFP U 10 TBD Call TI Call TI 5962-8868505PA OBSOLETE CDIP JG 8 TBD Call TI Call TI TL7702BCD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BCP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7702BCPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7702BID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7702BIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7702BIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7702BMFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI TL7702BMJG OBSOLETE CDIP JG 8 TBD Call TI Call TI TL7702BMJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI TL7702BMUB OBSOLETE CFP U 10 TBD Call TI Call TI TL7702BQD OBSOLETE SOIC D 8 TBD Call TI Call TI TL7702BQDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL7702BQP OBSOLETE PDIP P 8 TBD Call TI Call TI TL7705BCD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BCDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BCDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BCDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & CU NIPDAU Level-2-260C-1YEAR PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 1

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) no Sb/Br) TL7705BCP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7705BCPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7705BID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL7705BIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7705BIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7705BMFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI TL7705BMJG OBSOLETE CDIP JG 8 TBD Call TI Call TI TL7705BMJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI TL7705BMUB OBSOLETE CFP U 10 TBD Call TI Call TI TL7705BQD ACTIVE SOIC D 8 75 TBD CU NIPDAU Level-1-220C-UNLIM TL7705BQDR ACTIVE SOIC D 8 2500 TBD CU NIPDAU Level-1-220C-UNLIM TL7705BQP OBSOLETE PDIP P 8 TBD Call TI Call TI TL7733BCD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BCDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BCDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BCDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BCP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7733BCPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7733BID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BIDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BIDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL7733BIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL7733BIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type (1)The marketing status values are defined as follows: PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 2

ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 3

MCER001A – JANUARY 1995 – REVISED JANUARY 1997 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) Seating Plane 4040107/C 08/96 0.065 (1,65) 0.045 (1,14) 0.020 (0,51) MIN 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) MAX 0.130 (3,30) MIN 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0°–15° NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a ceramic lid using glass frit. D. Index point is provided on cap for terminal identification. E. Falls within MIL STD 1835 GDIP1-T8

MLCC006B – OCTOBER 1996 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 4040140/D 10/96

28 TERMINAL SHOWN

B 0.358 (9,09) MAX (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) ANO. OF MINMAX 0.358 0.660 0.761 0.458 0.342 (8,69) MIN (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32)(18,78) 0.020 (0,51) TERMINALS 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 121314151618 17 432 0.020 (0,51) 0.010 (0,25) 12826 27 B SQ A SQ 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a metal lid. D. The terminals are gold plated. E. Falls within JEDEC MS-004

MPDI001A – JANUARY 1995 – REVISED JUNE 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.015 (0,38) Gage Plane 0.325 (8,26) 0.300 (7,62) 0.010 (0,25) NOM MAX 0.430 (10,92) 4040082/D 05/98 0.200 (5,08) MAX 0.125 (3,18) MIN 0.355 (9,02) 0.020 (0,51) MIN 0.070 (1,78) MAX 0.240 (6,10) 0.260 (6,60) 0.400 (10,60) 0.015 (0,38) 0.021 (0,53) Seating Plane M0.010 (0,25) 0.100 (2,54) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated