770849

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 84

Technical content

MTA, CST-100II,SL-156and AMP Economy Power (EP) Co nnectors NOT the LATEST REVISION

© 1977, 1978, 1979, 1980, 1983, 1986, 1988, 1992, 1993, 1994, 1995, 1999, 2000, 2001, 2002, 2003 and 2005 by Tyco Electronics Corporation. All International Rights Reserved. AMP , AMP-O-LECTRIC, AMP-O-MATIC, AMPOMATOR, CERTI-CRIMP , PRO-CRIMPER, MADISON CABLE and TYCO are trademarks. TEFLON is a trademark of E.I. DuPont De Nemours and Company. Other products, logos, and company names mentioned herein may be trademarks of their respective owners. .050 [1.27] Centerline Connectors IDC Connector Kits (Feed-Thru and Closed End) Through-Hole Header Assemblies Surface Mount Header Assemblies .100 [2.54] Centerline Connectors Connectors — UL94V-2 and UL94V-0 MTA-100 Posted Connectors (Wire-to-Wire) UL94V-2 Headers — UL94V-0 .156 [3.96] Centerline Connectors Connectors — UL94V-2 and UL94V-0 MTA-156 Posted Connectors (Wire-to-Wire) — UL94V-2 MTA-156 Headers — UL94V-0 Introduction This catalog has been designed to assist you, our customer, iden- tify products to satisfy your con- nector needs for printed circuit board headers, mass termination connectors preloaded with con- tacts, crimp-snap contacts and housings, and card edge con- nectors with preloaded contacts. The list at right identifies by centerline the types of product available and is meant to be of assistance to you in the product selection process. IDC MTA-50 IDC MTA-100 Crimp CST-100 II IDC MTA-156 Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents

Connectors — UL94V-0 .156 [3.96] Centerline Connectors .200 [5.08] Centerline Connectors .312 [7.92] Centerline Connectors Single Connectors Center-Contact Wire-to- No. of Wire Wire Current Voltage Operating UL Replace- Product Name line Termin- Wire Positions Size Insulation Rating Rating Temp. Flammability ment Approvals ation Option (AWG) Dia. Max. (A)** Max. (VAC) Range (°C) Contacts .050" Centerline MTA-50 IDC Connector .050 IDC Planned 2–28 30–26 .039* 1 30 –55 to +105 V-0 & V-2 NoKits and Headers 1.27 0.99 .100" Centerline MTA-100 Connectors .100 IDC Y es 2–28 28–22 .060* 5 250 –55 to +105 V-0 & V-2 Y esand Headers 2.54 1.52 CST -100 II Contacts .100 Crimp Planned 2–28 26–22 .065 4 250 –55 to +105 V-0 Y esand Housings 2.54 1.65 .156" Centerline MTA-156 Connectors .156 IDC Y es 2–24 26–18 .095* 7 600 –55 to +105 V-0 & V-2 Y esand Headers 3.96 2.41 SL-156 Contacts .156 1–24; 2–10 .105 and Housings 3.96 Crimp No w/ through 24–18 2.67 10 250 –25 to +105 V-0 Y es board latch .156", .200" and .312" Centerlines When terminated one position at a time. Current Rating is application dependent. Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in Tyco Electronics products. They can provide you with: I Technical support I Catalogs I Technical Documents I Product Samples I Authorized Distributor Locations R R R R R R R R R R R R R R R R R R R R Connector Selection Guide Crimp SL-156 Crimp AMP EP Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Table of Contents(Continued)

.050 [1.27] Product Facts I 2–28 contact positions I Connectors terminate 26, 28 and 30 AWG discrete wire or .050 [1.27] centerline rib- bon cable I Color-coded housings I Maximum cable insulation diameter of .039 [0.99] with PVC insulation only I IDC contacts pre-loaded in receptacle housing I 30 V, 1 A contact rating I Contact design allows for gold-to-gold or tin-to-tin interface I Contacts are lubricated to prevent fretting corrosion I Wire feed-thru capability for daisy-chain wiring or closed end for point-to-point wiring I Connectors are polarized for proper mating I Manual and semiautomatic application tooling I Mating heights shown below: I Component Recognized by Underwriters Laboratories Inc. to US and Canadian Standards, File No. E28476 (Connectors and Headers) File No. E53793 (Ribbon Cable) The MTA-50 IDC Connector System is a wire-to-printed cir- cuit board system with con- tacts in a staggered, single row on .050 [1.27] centerline. The design features wire feed- through capability for daisy- chain applications. Insulation displacement contacts are used to terminate a wide range of conductor sizes. Ribbon cable can also be ter- minated when the appropriate receptacle assembly and strain relief cover are used. Header assemblies for board mount applications include right-angle (horizontal) and vertical mount products. These are available in through-hole and surface mount configurations. Typical uses of the MTA-50 IDC connectors would be in the Appliance, Commercial and Home Equipment and Security products industries. See the following pages for related products: I Ribbon Cable (reels), .050 [1.27] centerline (p. 71) I Application Tooling (p. 76) I Cable Assemblies (p. 74) Performance Data Voltage Rating— 30 VAC Current Rating— 1 amp max. Low-Level Resistance— 30 milliohms Dielectric Withstanding Voltage—

500 VAC

Insulation Resistance— 1,000 megohms Operating Temperature— –55°C to +105°C for connector only; cable rating may be lower Technical Documents Application Specification— 114-13072 MTA-50 Connectors Product Specifications— 108-2113 MTA-50 Connectors 100-4703 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, PVC insulation) 100-6257 MADISON CABLE Cable Specification (28 AWG, 7/36 Tinned copper, TPO insulation) .503 [12.78] or .254 [6.45] Max. Vertical Max. Right-Angle These matrixes have been prepared to assist you in defining the correct mating halves for the MTA-50 header and connector kit combina- tion. Where a “Y” is indicated the combination is a valid mating pair. Note: Tyco Electronics does NOT rec- ommend intermating connectors and headers with different contact plat- ings. 1445120144512114451691445172 Connector Kits

1445343 YYYY

1445346 YYYY

1445349 YYYY

1445352 YYYY

1445355 YYYY

1445358 YYYY

1445361 YYYY

1445364 YYYY

1445367 YYYY

1445370 YYYY

1445373 YYYY

1445376 YYYY

1445125144512614451711445174 Headers Connector Kits Matrix for .000030 [0.00076] Gold Plated Part Numbers

1445342 YY YY

1445345 Y YY Y

1445348 Y YY Y

1445351 Y YY Y

1445354 Y YY Y

1445357 Y YY Y

1445360 Y YY Y

1445363 Y YY Y

1445366 Y YY Y

1445369 Y YY Y

1445372 Y YY Y

1445375 Y YY Y

1445123144512414451701445173 Connector Kits Matrix for .000015 [0.00038] Gold Plated Part Numbers Matrix for Tin Plated Part Numbers

1445341 YYYY

1445344 YYYY

1445347 YYYY

1445350 YYYY

1445353 YYYY

1445356 YYYY

1445359 YYYY

1445362 YYYY

1445365 YYYY

1445368 YYYY

1445371 YYYY

1445374 YYYY

MTA-50 IDC Connector Kit / Header Mateability Guide MTA-50 IDC Connectors and Headers MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] Connector Kits — Ribbon Cable Feed-Thru and Closed End Connectors Material and Finish Housing — UL 94V-2 rated, thermo- plastic Contacts— Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Color Coding by Wire Size for UL94V-0 Connectors

26 AWG — Blue

28 AWG — Green

30 AWG — Brown

For Strain Relief Covers see page 6. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. A ± .004 [± 0.10] (See Note 1) .050 [1.27] .035 [0.89] .100 ± .003 [2.54 ± 0.08] .190 ± .003 [4.83 ± 0.08] Ref. Ref. Position 1 .150 [3.81] .315 ± .006□ [8.00 ± 0.15] Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part num- ber 1445359 2 position = 0-1445359-2 and 28 position = 2-1445359-8 Base Part Numbers Connector Feed-Thru Closed End Type & Connector Kit No. of Connector Kit No. ofWire Size Part Nos. Circuits Part Nos. Circuits Tin Plated 26 AWG 1445359 2–28 1445368 2–280.12–0.15 mm 2 28 AWG 1445362 2–28 1445371 2–280.08–0.09 mm 2 30 AWG 1445365 2–28 1445374 2–280.05–0.06 mm 2 .000030 [0.00076] Gold Plated 26 AWG 1445361 2–28 1445370 2–280.12–0.15 mm 2 28 AWG 1445364 2–28 1445373 2–280.08–0.09 mm 2 30 AWG 1445367 2–28 1445376 2–280.05–0.06 mm 2 .000015 [0.00038] Gold Plated 26 AWG 1445360 2–28 1445369 2–280.12–0.15 mm 2 28 AWG 1445363 2–28 1445372 2–280.08–0.09 mm 2 30 AWG 1445366 2–28 1445375 2–280.05–0.06 mm 2 Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits 2. Strain relief covers shown on page 6 are required and sold as part of the Connector Kit. 3. Stranded UL Style 1061 or equiv- alent wire is recommended. 4. Unless otherwise stated all toler- ances (except plating) to be ±.005 [±0.13]. 5. Consult Product Drawing for RoHS Compliant information. Note: Tin-plated connectors and headers in even position sizes from 2–12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Receptacle Assemblies — Ribbon Cable MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] .090 [2.29]4 Plcs. .040 [1.02] .068 [1.73] 2 Plcs. 2 Plcs. A .255 [6.48] .237 ± .008 [6.02 ± 0.20] Strain Relief Covers Material and Finish Strain Relief Cover— UL 94V-0 rated, thermoplastic, black Closed End Feed-Thru and Closed End No. of Circuits Dim. A No. of Circuits Dim. A 16 .960 24.38 17 1.010 25.65 18 1.060 26.92 19 1.110 28.19 20 1.160 29.46 21 1.210 30.73 22 1.260 32.00 23 1.310 33.27 24 1.360 34.54 25 1.410 35.81 26 1.460 37.08 27 1.510 38.35 28 1.560 39.62 2 .260 6.60 3 .310 7.87 4 .360 9.14 5 .410 10.41 6 .460 11.68 7 .510 12.95 8 .560 14.22 9 .610 15.49 10 .660 16.76 11 .710 18.03 12 .760 19.30 13 .810 20.57 14 .860 21.84 15 .910 23.11 Closed End .123 ± .006 [3.12 ± 0.15] .237 ± .008□ [6.02 ± 0.20] A Feed-Thru Feed-Thru Connector Kits — Ribbon Cable (Continued) MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] Connector Kits — Discrete Wire Feed-Thru and Closed End Connectors Material and Finish Housing — UL 94V-2 rated, thermo- plastic Contacts— Phosphor bronze; .000100 [0.00254] min. tin in wire termination area, over .000050 [0.00127] min. nickel; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Color Coding by Wire Size for UL94V-0 Connectors For Strain Relief Covers see page 8. For mating Headers see pages 9 and 10. For Mateability Guide, see matrixes on page 4. A ± .004 [± 0.10] (See Note 1) .050 [1.27] .035 [0.89] .100 ± .003□ [2.54 ± 0.08] .190 ± .003 [4.83 ± 0.08] Ref. Ref. Position 1 .150 [3.81] .315 ± .006□ [8.00 ± 0.15] Base Part Numbers Connector Feed-Thru Closed End Type & Connector Kit No. of Connector Kit No. ofWire Size Part Nos. Circuits Part Nos. Circuits Tin Plated 26 AWG 1445341 2–28 1445350 2–280.12–0.15 mm 2 28 AWG 1445344 2–28 1445353 2–280.08–0.09 mm 2 30 AWG 1445347 2–28 1445356 2–280.05–0.06 mm 2 .000030 [0.00076] Gold Plated 26 AWG 1445343 2–28 1445352 2–280.12–0.15 mm 2 28 AWG 1445346 2–28 1445355 2–280.08–0.09 mm 2 30 AWG 1445349 2–28 1445358 2–280.05–0.06 mm 2 .000015 [0.00038] Gold Plated 26 AWG 1445342 2–28 1445351 2–280.12–0.15 mm 2 28 AWG 1445345 2–28 1445354 2–280.08–0.09 mm 2 30 AWG 1445348 2–28 1445357 2–280.05–0.06 mm 2 Notes: 1. To determine connector overall length (dim. A), multiply .050 x the number of circuits and add .082. Example: .050 x 10 circuits 2. Strain relief covers shown on page 8 are required and sold as part of the Connector Kit. 3. Stranded UL Style 1061 or equiv- alent wire is recommended. 4. Unless otherwise stated all toler- ances (except plating) to be ±.005 [±0.13]. 5. Consult Product Drawing for RoHS Compliant information. Connector Kit Ordering Information Connector Kit consists of Receptacle Assembly and Strain Relief Cover. Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part num- ber 1445341 2 position = 0-1445341-2 and 28 position = 2-1445341-8 Note: Tin-plated connectors and headers in even position sizes from 2–12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Receptacle Assemblies — Discrete Wire MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] Strain Relief Covers Material and Finish Strain Relief Cover— UL 94V-0 rated, thermoplastic, black Closed End No. of Circuits Dim. A No. of Circuits Dim. A 16 .960 24.38 17 1.010 25.65 18 1.060 26.92 19 1.110 28.19 20 1.160 29.46 21 1.210 30.73 22 1.260 32.00 23 1.310 33.27 24 1.360 34.54 25 1.410 35.81 26 1.460 37.08 27 1.510 38.35 28 1.560 39.62 2 .260 6.60 3 .310 7.87 4 .360 9.14 5 .410 10.41 6 .460 11.68 7 .510 12.95 8 .560 14.22 9 .610 15.49 10 .660 16.76 11 .710 18.03 12 .760 19.30 13 .810 20.57 14 .860 21.84 15 .910 23.11 Feed-Thru and Closed End Feed-Thru .040 [1.02] .068 [1.73] .090 [2.29] 4 Plcs. 2 Plcs. 2 Plcs. .255 [6.48] .237 ± .008□ [6.02 ± 0.20] A Closed End .123 ± .006□ [3.12 ± 0.15] .237 ± .008 [6.02 ± 0.20] A Feed-Thru Connector Kits — Discrete Wire(Continued) MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] Right-Angle A .035 [0.89] .125 [3.18] .016□ [0.41].050 [1.27] Ref. Ref. Ref. Ref. Circuit #1 .180□ [4.57] .220 ± .003□ [5.59 ± 0.08] .035□ [0.89]Ref. Vertical Material and Finish Housing — UL 94V-0 rated, thermo- plastic, black Contacts— Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder legs; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel .035 [0.89] Ref. Circuit #1 .060 [1.52] .125□ [3.18] A Ref. .050 [1.27] .016□ [0.41]Ref. Ref. .035□ [0.89] .170 [4.32] .220 ± .003□ [5.59 ± 0.08] Ref. Base Part Numbers Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445120 2–28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445125 2–28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445123 2–28 Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .100 [2.54] .035 [0.89] .210 [5.33] .050 [1.27].250* [6.35] .031 ± .00 2 [0.78 ± 0.0 5 ] Circuit #1 Typ. Dia. Typ. Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. Base Part Numbers Through-Hole Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445169 2–28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445171 2–28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445170 2–28 .100 [2.54] .250* [6.35] .035 [0.89] .068 [1.73] .0705 [1.90] * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. .050 [1.27] .031 ± .0 02 [0.78 ± 0. 05 ] .060 ± .003 [1.52 ± 0. 08 ] Circuit #1 Typ. Dia. Typ. Dia. Typ. Recommended Mounting Hole Size and Pattern for .062 [1.57] Thick PC Board Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part num- ber 1445120 2 position = 0-1445120-2 and 28 position = 2-1445120-8 For mating Connector Kits see pages 5 through 8. For mateability options, see matrixes on page 4. Note: Tin-plated connectors and headers in even position sizes from 2–12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Through-Hole Header Assemblies MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.050 [1.27] Right-Angle Vertical Material and Finish Housing — UL 94V-0 rated, thermo- plastic, black Contacts— Brass, .000100 [0.00254] min. tin over .000050 [0.00127] min. nickel on solder pads; choice on mating end: .000100 [0.00254] min. tin or .000030 [0.00076] gold or .000015 [0.00038] gold, over .000050 [0.00127] min. nickel Boardlock— Phosphor bronze, tin plated .000100 [0.000254] min. over .000050 [0.00127] min. nickel .035 [0.89]Ref. Circuit #1 A .170□ [4.32] .249 [6.32] .220 ± .003□ [5.59 ± 0.08] Ref. For mating Connector Kits see pages 5 through 8. For mateability options, see matrixes on page 4. Note: To determine header overall length (dim. A), multiply .050 x the number of circuits and add .150. Example: .050 x 6 circuits equals .300 + .150 = .450 [11.43]. .162 [4.11] .128 [3.25] .100 [2.54] * 6-circuit Dim. shown, refer to Product Drawing for actual PCB Dimensions and RoHS Compliant information. .050 [1.27] Circuit #1 Typ. .028 ± .001□ [0.71 ± 0.03] .075 ± .001□ [1.91 ± 0.03] .070 ± .003□ [1.78 ± 0.08] 2 Plcs. .145 ± .003□ [3.68 ± 0.08] 2 Plcs. .574* [14.58] Recommended PC Board Layout □ for use with .010 [0.25] Thick Stencil Typ. Base Part Numbers Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445172 2–28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445174 2–28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445173 2–28 Base Part Numbers Surface Mount Header No. of Part Nos. Posts Standard UL 94V-0, Tin Plated 1445121 2–28 Standard UL 94V-0 .000030 [0.00076] Gold Plated 1445126 2–28 Standard UL 94V-0 .000015 [0.00038] Gold Plated 1445124 2–28 Note: All SMT product is pre- packaged in standard tape and reel format. .162 [4.11] .574* [14.58] .100 [2.54] .100 [2.54] * 6-circuit Dim. shown, refer to Product Drawing for actual □ PCB Dimensions and RoHS Compliant information. .050 [1.27] Circuit #1 Typ. .100 [2.54]Typ. Typ. Typ. .028 ± .001□ [0.71 ± 0.03] .065 ± .001□ [1.65 ± 0.03] .070 ± .003□ .145 ± .003□ [3.68 ± 0.08] 2 Plcs. Recommended PC Board Layout □ for use with .010 [0.25] Thick Stencil Header Ordering Information Base part number prefixes and suffixes indicate the number of circuit positions, for example: Base part num- ber 1445121 2 position = 0-1445121-2 and 28 position = 2-1445121-8 A .050 [1.27].035 [0.89] Ref. Ref. Circuit #1 .180□ [4.57] .270□ [6.86] .220 ± .003□ [5.59 ± 0.08] Ref. Note: Tin-plated connectors and headers in even position sizes from 2–12 and 18 are stocked parts; all other position sizes and products with gold-plated contacts are Make To Order. Surface Mount Header Assemblies MTA-50 IDC Connectors and Headers (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Product Facts I Connectors and headers for 2 through 28 positions; wire sizes of 22, 24, 26 and 28 AWG [0.4-0.08 mm 2 ] I Wire-to-Post Connectors preloaded with dual beam contacts I Connectors and headers, except shrouded headers, are end-to-end stackable I Connector styles include both closed end and feed- thru connectors with locking ramps, with and without polarizing tabs I Molded ribs on housing do not allow reverse mating I Posted connectors for 2 through 19 positions I Connectors preloaded with IDC contacts I All contacts are slotted for insulation displacement (IDC) terminal technique I Contacts are lubricated for fretting corrosion protection I Benefits derived from the MTA-100 system include increased quality and ease of handling such as— I One-step assembly I No wire stripping I No contact damage I Reduced wiring errors I Simpler tooling I Simple maintenance and repair I Meets the material require- ments of Table 23.1 of UL1410 Standards for Television Receiver and Video Products (wire-to- post connectors only) I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR7189 R R Technical Documents Product Specification 108-1050 MTA-100 Connectors Application Specifications 114-1019 MTA-100 Connectors 114-1031 MTA-100 Ribbon Cable Assembly MT A-100 connectors accept discrete and ribbon cable wire sizes ranging from 22 – 28 AWG [0.4 – 0.08 mm2] with maximum insulation outside diameter of .060 [1.52] for terminat- ing single wire and .050 [1.27] for mass termination of wires. Tin plated solid, fused stranded, or stranded (7 strands) wire with PVC insulation can be used on 22 – 28 AWG [0.4 – 0.9 mm MTA-100 connectors and 19 stranded wire on 22–24 AWG [0.4– 0.2 mm MTA-100 connectors. Only Performance Data* Voltage Rating— 250 vac Current Rating— 5 amp max. Low-Level Resistance— 6 m/H9024max. initial Dielectric Withstanding Voltage— 750 vac/1 min. Insulation Resistance— 5000 M/H9024min. initial Operating Temperature— /H1100255/H11034C to/H11001105/H11034C Note: Refer to page 70 for approved wire listings. one wire to be terminated into an IDC contact slot. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .100 [2.54] centerline headers com- pletes the system. Headers are available with straight or right-angle posts, in flat, polarized or friction lock styles. Headers are avail- able in 2 through 28 positions. Shrouded headers are available in 2 through 14 positions. *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. .100 [2.54] Centerline MTA-100 IDC Connectors and Headers MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MT A-100 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating.

640440 YYYYYYYYYYYY YYYYYYN

640441 YYYYYYYYYYYY YYYYYYN

640442 YYYYYYYYYYYY YYYYYYN

640443 YYYYYYYYYYYY YYYYYYN

640468 YYYYYYYYYYYY YYYYYYN

640469 YYYYYYYYYYYY YYYYYYN

640470 YYYYYYYYYYYY YYYYYYN

640471 YYYYYYYYYYYY YYYYYYN

640620 YYYYYYYYYYYY YYYYYYN

640621 YYYYYYYYYYYY YYYYYYN

640622 YYYYYYYYYYYY YYYYYYN

640623 YYYYYYYYYYYY YYYYYYN

641311 YYYYYYYYYYYY YYYYYYN

641312 YYYYYYYYYYYY YYYYYYN

641313 YYYYYYYYYYYY YYYYYYN

641314 YYYYYYYYYYYY YYYYYYN

641534 YYYYYYYYYYYY YYYYYYN

641535 YYYYYYYYYYYY YYYYYYN

641536 YYYYYYYYYYYY YYYYYYN

641537 YYYYYYYYYYYY YYYYYYN

641653 YYYYYYYYYYYY YYYYYYN

641654 YYYYYYYYYYYY YYYYYYN

641655 YYYYYYYYYYYY YYYYYYN

641656 YYYYYYYYYYYY YYYYYYN

643498 YYYYYYYYYYYY YYYYYYN

643813 YYYYYYYYYYYY YYYYYYN

643814 YYYYYYYYYYYY YYYYYYN

643815 YYYYYYYYYYYY YYYYYYN

643816 YYYYYYYYYYYY YYYYYYN

643828 YYYYYYYYYYYY YYYYYYN

644083 YYYYYYYYYYYY YYYYYYN

644312 YYYYYYYYYYYY YYYYYYN

644313 YYYYYYYYYYYY YYYYYYN

644497 YYYYYYYYYYYY YYYYYYN

644511 YYYYYYYYYYYY YYYYYYN

644512 YYYYYYYYYYYY YYYYYYN

644513 YYYYYYYYYYYY YYYYYYN

644514 YYYYYYYYYYYY YYYYYYN

644540 YYYYYYYYYYYY YYYYYYN

644563 YYYYYYYYYYYY YYYYYYN

644564 YYYYYYYYYYYY YYYYYYN

644565 YYYYYYYYYYYY YYYYYYN

644574 YYYYYYYYYYYY YYYYYYN

644575 YYYYYYYYYYYY YYYYYYN

644576 YYYYYYYYYYYY YYYYYYN

644577 YYYYYYYYYYYY YYYYYYN

644578 YYYYYYYYYYYY YYYYYYN

644579 YYYYYYYYYYYY YYYYYYN

644795 YYYYYYYYYYYY YYYYYYN

*1375820 YYYYYYYYNNYYNNYYYYY *Select contact plating to match header plating. NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYY YYYYYYY YY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYY YYYYYYY YY N NYYY YYYYYYY YY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYY YYYYYYY YY NNYYYYYYYYYYYY NNYYYYYYYYYYYY N NYYY YYYYYYY YY N NYYY YYYYYYY YY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY NNYYYYYYYYYYYY YYYYYYYYYYYYYY 640452640453640454640455640456640457644456644457644486644488644694644695644803644861644874644875644876644877644892644893644894647047647048647050647051647106647166 Headers Connectors Matrix for Tin Plated Part Numbers 647502647531647623 MTA-100 Connector/Header Mateability Guide MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54]

641237 YYYYYYYYYYYYNNNYYY

641238 YYYYYYYYYYYYNNNYYY

641239 YYYYYYYYYYYYNNNYYY

641240 YYYYYYYYYYYYNNNYYY

641241 YYYYYYYYYYYYNNNYYY

641242 YYYYYYYYYYYYNNNYYY

641243 YYYYYYYYYYYYNNNYYY

641244 YYYYYYYYYYYYNNNYYY

644020 YYYYYYYYYYYYNNNYYY

644042 YYYYYYYYYYYYNNNYYY

644043 YYYYYYYYYYYYNNNYYY

644044 YYYYYYYYYYYYNNNYYY

644702 YYYYYYYYYYYYNNNYYY

644726 YYYYYYYYYYYYNNNYYY

*1375820 YYYYYYNNYYYY YYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY YYYYYYYY YYYYYYYY Y YYYYYYY Y YYYYYYY YYYYYYYY 641211641212641213641214641215641216644487644489644884644885644886644887644896644897644898647108647109647114647116647117647168 Headers Connectors This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MT A-100 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers

641190 YYYYYYYYYYYYY YYYYYYY Y

641191 YYYYYYYYYYYYY YYYYYYY Y

641192 YYYYYYYYYYYYY YYYYYYY Y

641193 YYYYYYYYYYYYY YYYYYYY Y

641198 YYYYYYYYYYYYY YYYYYYY Y

641199 YYYYYYYYYYYYY YYYYYYY Y

641200 YYYYYYYYYYYYY YYYYYYY Y

641201 YYYYYYYYYYYYY YYYYYYY Y

644038 YYYYYYYYYYYYY YYYYYYY Y

644040 YYYYYYYYYYYYY YYYYYYY Y

647477 YYYYYYYYYYYYY YYYYYYY Y

647480 YYYYYYYYYYYYY YYYYYYY Y

*1375820 NNNNNNNNNNNNN NNNNNNY Y

1744020 YYYYYYYYYYYYY YYYYYYY Y

641122641123641124641125641126641127644888644889644890644891647075647076647078647079647107647167 Headers Connectors Matrix for .000015 [0.00038] Gold Plated Part Numbers *Select contact plating to match header plating. 6476266476246475341744047 6476256476276475331744074 MTA-100 Connector/Header Mateability Guide(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 1744163 647467

.100 [2.54] Material and Finish Housing— UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts— Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [0.00038] post gold-plated over nickel Closed End Connectors .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22].275 [6.99] .184 [4.67] .100 [2.54] Typ. A .056□ [1.42] Without Polarizing Tabs With Polarizing Tabs .075 [1.91] .228 [5.80] .520 [13.21] .275 [6.99] .075 [1.91] .245 [6.22] .305 [7.75] .184 [4.67] .100□ [2.54] Typ. A .056□ [1.42] Without Polarizing Tabs With Polarizing Tabs .075 [1.91] .228 [5.80] Feed-Thru Connectors Color Coding by Wire Size for UL94V-2 Connectors

24 AWG — White

22 AWG — Red

All wire sizes in UL94V-0— Black For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 20 thru 30. Notes: 1. Refer to pages 70-74 for approved wire listing. 2. For strain reliefs and dust covers, see page 16. 3. For keying plugs, see page 17. 4. Other circuit sizes are available upon request. Minimums may apply. 5. Connector circuits can be molded closed for keying purposes. Minimums may apply. 6. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 7. To determine connector overall length (dim. A), multiply .100 x the number of circuits. Example: .100 x 10 circuits equals 1.000 inch [25.4 mm]. MTA-100 IDC Connectors—Closed End and Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number, and their RoHS (Restrictions on Certain Hazardous Substances) Compliant (lead free) equivalent avail- able for the described con- nectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end con- nector without polarizing tabs for 22 AWG wire would be: Base number 640440 plus prefix-and-suffix 4-— -0 The correct ordering num- ber is 4-640440-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640440-2 3 3-640440-3 4 3-640440-4 5 3-640440-5 6 3-640440-6 7 3-640440-7 8 3-640440-8 9 3-640440-9 10 4-640440-0 11 4-640440-1 12 4-640440-2 13 4-640440-3 14 4-640440-4 15 4-640440-5 16 4-640440-6 17 4-640440-7 18 4-640440-8 19 4-640440-9 20 5-640440-0 21 5-640440-1 22 5-640440-2 23 5-640440-3 24 5-640440-4 25 5-640440-5 26 5-640440-6 27 5-640440-7 28 5-640440-8 Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Base Part Numbers Closed End Feed-Thru Without Tabs With Tabs Without Tabs With Tabs Connector Type & Wire Size Connector RoHS Connector RoHS Connector RoHS Connector RoHS Standard UL94V-2, Tin Plated 22 AWG 640440 32–58 643813 32–58 640620 32–58 644540 1 32–450.3–0.4 mm 2 24 AWG 640441 32–58 643814 32–58 640621 32–58 644563 1 32–540.2 mm 2 26 AWG 640442 32–58 643815 32–58 640622 32–58 644564 1 32–450.12–0.15 mm 2 28 AWG 640443 32–58 643816 32–58 640623 32–58 644565 1 32–450.08–0.09 mm 2 Tape Mounted on Reel UL94V-2, Tin Plated 22 AWG 640468 32–58 644511 42–68 641311 32–58 ——0.3–0.4 mm 2 24 AWG 640469 32–58 644512 32–58 641312 32–58 ——0.2 mm 2 26 AWG 640470 32–58 644513 32–58 641313 32–58 ——0.12–0.15 mm 2 28 AWG 640471 32–58 644514 32–58 641314 32–58 ——0.08–0.09 mm 2 Standard UL94V-2, .000030 [0.00076] Gold Plated 22 AWG 641237 32–58 644042 32–58 641241 32–58 644702 1 32–450.3–0.4 mm 2 24 AWG 641238 32–58 644020 32–58 641242 32–58 ——0.2 mm 2 26 AWG 641239 32–58 644043 1 32–44 641243 32–58 644726 1 32–450.12–0.15 mm 2 28 AWG 641240 32–58 644044 1 32–44 641244 32–58 ——0.8–0.9 mm 2 Standard UL94V-2, .000015 [0.00038] Gold Plated 22 AWG 641190 32–58 644038 1 32–44 641198 32–58 647477 32–460.3–0.4 mm 2 24 AWG 641191 32–58 1744020 1 32–44 641199 32–58 ——0.2 mm 2 26 AWG 641192 32–58 644040 1 32–44 641200 32–58 647480 32–430.12–0.15 mm 2 28 AWG 641193 32–58 —— 641201 32–58 ——0.08–0.09 mm 2 LED*, UL94V-2, Tin Plated (See Note 1) 22 AWG 641534 32–33 —— 641653 32–33 ——0.3–0.4 mm 2 24 AWG 641535 32–33 644795 32–33 641654 32–33 ——0.2 mm 2 26 AWG 641536 32–33 —— 641655 32–33 ——0.12–0.15 mm 2 28 AWG 641537 32–33 —— 641656 32–33 ——0.08–0.09 mm 2 Standard UL94V-0, Tin Plated (Gold is available, minimums may apply.) (Black in color) 22 AWG 643498 1 32–45 644083 1 32–45 644575 1 32–45 644578 1 32–450.3–0.4 mm 2 24 AWG 644574 1 32–45 644312 1 32–45 644576 1 32–45 644579 1 32–450.2 mm 2 26 AWG 643828 1 32–45 644313 1 32–45 644577 1 32–45 644497 1 32–450.12–0.15 mm 2 1 Other circuit sizes are available upon request. Minimums may apply. 2 Tape mounted. Note: Blocked circuit configurations are available. Contact product engineer or product manager for details. Minimums may apply. MTA-100 IDC Connectors—Closed End and Feed-Thru (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Covers Material (RoHS Compliant) Strain Relief Cover— UL94V-2 rated, nylon, white Dust Covers — UL94V-0 rated, polyester, white Closed End Strain Relief Covers Feed-Thru Strain Relief Covers Closed End Dust Covers Feed-Thru Dust Covers .340 [8.64] .345 [8.76] .127 [3.23] Note: This portion of the front locking bar □ may or may not be present. A A .130 [3.3] .105□ [2.67] .360□ [9.14] Retention Dimple .335□ [8.51] .360 [9.14] Note: This portion of the front locking bar□ may or may not be present. A .127 [3.23] A .130□ [3.3] .245□ [6.22] .395 [10.03] Retention Dimple Cover Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed end strain relief cover would be: Base number 643075 plus prefix-and-suffix 1-— -0 The correct ordering num- ber is 1-643075-0 Base Part Numbers Closed End Feed-Thru Strain Relief Dust Strain Relief Dust Covers Covers Covers Covers Cover No. of Cover No. of Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits Part Nos. Circuits Part Nos. Circuits 643075 2–28 640550 2–28 643077 2–28 640642 3-28 Cover Length No. of Dim. Prefix/ Circuits A Suffix 2 .200 -25.08 3 .300 -37.62 4 .400 -410.16 5 .500 -512.7 6 .600 -615.24 7 .700 -717.78 8 .800 -820.32 9 .900 -922.86 10 1.00 1- -025.4 11 1.100 1- -127.94 12 1.200 1- -230.48 13 1.300 1- -333.02 14 1.400 1- -435.56 15 1.500 1- -538.1 16 1.600 1- -640.64 17 1.700 1- -743.18 18 1.800 1- -845.72 19 1.900 1- -948.26 20 2.000 2- -050.8 21 2.100 2- -153.34 22 2.200 2- -255.88 No. of Dim. Prefix/ Circuits A Suffix No. of Dim. Prefix/ Circuits A Suffix No. of Dim. Prefix/ Circuits A Suffix 23 2.300 2- -358.42 24 2.400 2- -460.96 25 2.500 2- -563.5 26 2.600 2- -666.04 27 2.700 2- -768.58 28 2.800 2- -871.12 MTA-100 IDC Connector Accessories MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Replacement IDC Contacts Material and Finish Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Note: Tyco Electronics does not rec- ommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. Wire Size Part Numbers AWG mm 2 Standard .000030 [0.00076] .000015 [0.00038] LED Tin Plated Gold Plated Gold Plated Tin Plated 22 0.3–0.4 640636-3 641186-4 641186-3 641643-2 24 0.2 640637-3 641187-4 641187-3 641644-2 26 0.12–0.15 640638-3 641188-4 641188-3 641645-2 28 0.08–0.09 640639-2 641189-4 641189-3 641646-2 Crimp Snap-In Contacts Material and Finish Phosphor bronze, tin plated Wire Size Part Nos. AWG mm 2 Loose Piece* Strip 26-22 0.12–0.4 640709-2 640708-2 Hand Tool No. 59836-1 (IS 408-6527) **Applicator No. 466747-1 (IS 408-8040) Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. .125 [3.18] .038 [0.97] .077 [1.96] .065 [1.65] .300 [7.62] .500 [12.7] .027□ [0.69] Sq. Ref. 1.800 [45.72] Ref. .452 [11.48] .075 [1.91] .070 [1.78] .070 [1.78] .142 [3.61] Max. .425 [10.8] Keying Plug with Carrier Strip (10 plugs per strip) Part No. 641994-1 Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Note: Removal of contact is not necessary when using keying plug. MTA-100 IDC Connector Accessories(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not accept- able for mating.

640440 YYYYYYYY

640441 YYYYYYYY

640442 YYYYYYYY

640443 YYYYYYYY

640468 YYYYYYYY

640469 YYYYYYYY

640470 YYYYYYYY

640471 YYYYYYYY

640620 YYYYYYYY

640621 YYYYYYYY

640622 YYYYYYYY

640623 YYYYYYYY

641311 YYYYYYYY

641312 YYYYYYYY

641313 YYYYYYYY

641314 YYYYYYYY

641534 YYYYYYYY

641535 YYYYYYYY

641536 YYYYYYYY

641537 YYYYYYYY

641653 YYYYYYYY

641654 YYYYYYYY

641655 YYYYYYYY

641656 YYYYYYYY

643498 YYYYYYYY

643828 YYYYYYYY

644574 YYYYYYYY

644575 YYYYYYYY

644576 YYYYYYYY

644577 YYYYYYYY

1375820 NNNNNNNN

647000647001647002647003647004647005647006647007 Posted Connectors Connectors Matrix for Tin Plated Part Numbers *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. MTA-100 Posted Connector/Connector Mateability Guide MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54]

641237 YYYYYYYY

641238 YYYYYYYY

641239 YYYYYYYY

641240 YYYYYYYY

641241 YYYYYYYY

641242 YYYYYYYY

641243 YYYYYYYY

641244 YYYYYYYY

647008647009647010647011647012647013647014647015 Posted Connectors Connectors This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-100 posted connector and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not accept- able for mating. Matrix for .000030 [0.00076] Gold Plated Part Numbers

641190 YYYYYYYY

641191 YYYYYYYY

641192 YYYYYYYY

641193 YYYYYYYY

641198 YYYYYYYY

641199 YYYYYYYY

641200 YYYYYYYY

641201 YYYYYYYY

647008647009647010647011647012647013647014647015 Posted Connectors Connectors Matrix for .000015 [0.00038] Gold Plated Part Numbers *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. *2 & 3 position MTA-100 Posted Connectors can not mate with MTA-100 connectors with polarizing tabs. MTA-100 Posted Connector/Connector Mateability Guide(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Connector Type Closed End Connector Feed-Thru Connector & Wire Size Part Nos. RoHS Equiv. Part Nos. No. of Circuits Standard UL 94V-2, Tin Plated

22 AWG 647000 647004 — 2

0.3–0.4 mm 2 32–491

24 AWG 647001 32–491 647005 — 2

0.2 mm 2

26 AWG 647002 32–491 647006 — 2

0.12–0.15 mm 2

28 AWG 647003 32–491 647007 — 2

0.08–0.09 mm 2 Standard UL 94V-2, .000030 [0.00076] Gold Plated

22 AWG 647008 32–491 647012 — 2

0.3–0.4 mm 2

24 AWG 647009 32–491 647013 — 2

0.2 mm 2

26 AWG 647010 32–491 647014 — 2

0.12–0.15 mm 2

28 AWG 647011 32–491 647015 — 2

0.08–0.09 mm 2 Standard UL 94V-2, .000015 [0.00038] Gold Plated

22 AWG 647016 32–491 647020 — 2

0.3–0.4 mm 2

24 AWG 647017 32–491 647021 — 2

0.2 mm 2

26 AWG 647018 32–491 647022 — 2

0.12–0.15 mm 2

28 AWG 647019 32–491 647023 — 2

0.08–0.09 mm 2 1 2 and 3 position MTA-100 Posted Connectors (Closed End)can not mate with MTA-100 connectors with polarizing tabs. 2 Parts may be manufactured upon request. Minimums may apply. Contact product engineer or product manager for details. MTA-100 .100 [2.54] Material and Finish Housing— UL 94V-2 rated, nylon, see chart for color Contacts— Copper alloy, post tin or gold plated over nickel (see chart) Notes: 1. Mating half visuals - pages 14 & 15. 2. Use feed thru strain relief covers & feed thru dust covers (if needed) - page 16. 3. Approved wire listing - pages 70 thru 74. Closed End Feed-Thru Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are determined by the number of circuit positions in the connec- tor. For example, the complete part number for a 12-position closed end connector for

22 AWG wire would be:

4-— -2 The correct ordering number is 4-647000-2 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647000-2 thru 19 4-647000-9 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Color Coding by Wire Size for UL 94V-2 Connectors Voltage Rating— 250 VAC Current Rating— 4 amp max. Low-Level Resistance— 16 mΩ max. initial Dielectric Withstanding Voltage— 750 VAC/1 min. Insulation Resistance— 5000 MΩ min. initial Operating Temperature— –55°C to +105°C Technical Documents Product Specification 108-1050-1 MTA-100 Posted Connector Application Specification 114-1019 MTA-100 Connectors Replacement IDC Contacts Material and Finish Contacts— Copper alloy, post tin or gold plated over nickel No. of Dim. Circuits AB 2 .300 .227 [7.62] [5.77] 3 .400 .327 [10.16] [8.31] 4 .500 .427 [12.70] [10.85] 5 .600 .527 [15.24] [13.39] No. of Dim. Circuits AB 6 .700 .627 [17.78] [15.93] 7 .800 .727 [20.32] [18.47] 8 .900 .827 [22.86] [21.01] 9 1.000 .927 [25.40] [23.55] No. of Dim. Circuits AB 10 1.100 1.027 [27.94] [26.09] 11 1.200 1.127 [30.48] [28.63] 12 1.300 1.227 [33.02] [31.17] 13 1.400 1.327 [35.56] [33.71] No. of Dim. Circuits AB 14 1.500 1.427 [38.10] [36.25] 15 1.600 1.527 [40.64] [38.79] 16 1.700 1.627 [43.18] [41.33] 17 1.800 1.727 [45.72] [43.87] 18 1.900 1.827 [48.26] [46.41] 19 2.000 1.927 [50.80] [48.95] Part Numbers Wire Size Tin .000030 AWG mm 2 Plated [.00076] Gold Plated 22 0.3–0.4 3-647030-1 3-647030-2 24 0.2 3-647031-1 3-647031-2 26 0.12–0.15 3-647032-1 3-647032-2 28 0.8–0.9 3-647033-1 3-647033-2 .843 [21.40] B Dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] Sq. .100 [2.54] Typ. A Dim. .843 [21.40] B Dim. .303 [7.70] .079 [2.00] .415 [10.54] .025 [0.54] Sq. .100 [2.54] Typ. A Dim. .083 [2.10] .770 [19.55].075 [1.91] .025□ [0.64] MTA-100 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641211 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641211-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641211–2 thru 28 5-641211-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Straight Post (.025 [0.64] Square) .200 [5.08] A .025 [0.64] Sq. .100 [2.54] Typ..050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54] .140 [3.56] Ref. .535 [13.59] .200 [5.08] A .100 [2.54] .025□ [0.64] Sq. .050 [1.27] Typ. .100 [2.54] Typ. .140 [3.56] Ref. .295□ [7.49] .062 [1.57] Post No. 1 Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board when mated with MTA-100 Connector. X = .120 [3.05] min., when mated with CST -100 II Connector. Right-Angle Post (.025 [0.64] Square) Base Part Numbers Straight Posts Right-Angle Posts Header No. of Posts/ Header No. of Posts/ Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL94V-0, Tin Plated 640452 2–28 640453 2–28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641211 2–28 641212 2–28 32–58 32–58 Standard UL94V-0, .000015 [0.00038] Gold Plated 641122 2–28 641123 2–28 32–58 32–58 .100 [2.54] Typ. .050/.040 [1.27/1.02]Edge of Board .120 [3.05] Min. Dia. .100 [2.54] Typ. .050/.040□ [1.27/1.02] Edge of Board X Dia. Note: Consult Product Drawing for details on placing headers onto PC boards. MTA-100 Flat Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing — UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers without retentive legs are suitable for breakaway application. 3. 2 or 3 retentive leg(s) per header, depending upon number of positions. 4. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 5. To determine header overall length (dim. A) multiply .100 x the number of posts minus (–) .012. Example: .100 x 10 posts – .012 = .988 inches [25.1 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and without retentive legs would be: Base number 644456 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-644456-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644456-2 thru 28 5-644456-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. .044 [1.12] Typ. .100 [2.54] .100□ [2.54] Typ. A .092 [2.34] .150□ [3.81] .260□ [6.6] .110 [2.79] Ref. .025 [0.64] Sq. Post No. 1 Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Straight and Right-Angle Post with Retentive Legs .044 [1.12] Typ. .100 [2.54] Post No. 1 .100 [2.54] Typ. .295 [7.49] .505 [12.83] .110 [2.79] Ref. A .092 [2.34] .025 [0.64] Sq. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .110 [2.79] Ref. .0335□ [0.85] Base Part Numbers Straight Posts Right-Angle Posts Without With Without With Retentive Legs Retentive Legs Retentive Legs Retentive Legs Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 644456 32–58 644695 32–58 644457 32–58 644694 32–58 Standard UL94V-0, .000030 [0.00076] Gold Plated 644884 2–28 644886 2–28 644885 2–28 644887 2–28 Standard UL94V-0, .000015 [0.00038] Gold Plated 644888 2–28 644890 2–28 644889 2–28 644891 2–28 .100 [2.54] Typ. .050/.040 [1.27/1.02] Edge of Board .060 [1.52] Min. Dia. For Straight Leg□ Headers Dia. For Retentive Leg□ Headers .037 [0.94 ] ± .002 ± 0.05 .100 [2.54]□ Typ. Edge of Board .060 [1.52] Min. .050/.040 [1.27/1.02] Dia. For Straight Leg Headers Dia. For Retentive Leg□ Headers .037 [0.94 ] ± .002 ± 0.05 Note: Consult Product Drawing for details on placing headers onto PC boards. MTA-100 Narrow Flat Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 High temperature product available. Please contact Sales Engineer or Product Information Center.

.100 [2.54] .125 [3.18]A .025 [0.64] Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54] .535 [13.59] .290 [7.37] .035 [0.89] Min. .140 [3.56] Ref. .225 [5.72] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641213 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641213-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641213-2 thru 28 5-641213-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .125□ [3.18] A .025 [0.64]□ Sq. .100 [2.54] Typ. .050 [1.27] Typ. Post No. 1 .295 [7.49] .290□ [7.37] .100 [2.54] .140 [3.56].140 [3.56] Max. .035 [0.89] Min. .225 [5.72] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Straight Posts Right-Angle Posts Without With Without With Retentive Legs Retentive Legs Retentive Legs Retentive Legs Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 640454 2–28 644876 2–28 640455 2–28 644877 2–28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641213 32–58 —— 641214 32–58 —— Standard UL94V-0, .000015 [0.00038] Gold Plated 641124 32–58 —— 641125 32–58 —— .100 [2.54] Typ. Edge of Board .130 [3.30] Min. .050/.040 [1.27/1.02] Dia. for straight leg headers Dia. for retentive leg headers .037 [0.94 ] ± .002 ± 0.05 .100 [2.54] Typ. Edge of Board X .050/.040□ [1.27/1.02] Dia. for straight □ leg headers Dia. for retentive□ leg headers .037 [0.94 ] ± .002 ± 0.05 .125 [3.18] Ref. 34° .135□ [3.43] Ref. 34° Retentive Leg Retentive Leg max. when mated with MTA-100 Connector. max. when mated with CST -100 II Connector. Note: Consult Product Drawing for details on placing headers onto PC boards. MTA-100 Polarized Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. All posts on retentive leg headers are bent. 4. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 641215 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641215-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641215-2 3-641215-2 thru 28 2-641215-8 5-641215-8 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) .050 [1.27] Typ. Post No. 1 .295 [7.49] .100 [2.54].140 [3.56] Ref. .535 [13.59] .310 [7.87] .125 [3.18] A .100 [2.54] Typ. .040 [1.02] Max. .025 [0.64] Sq. .225 [5.72] .125□ [3.18] A .025 [0.64]□ Sq. .100□ [2.54]□ Typ. .050 [1.27] Typ. .295 [7.49] .310□ [7.87] .100 [2.54] .140 [3.56] Max. .140□ [3.56] .040□ [1.02]□ Max. .225 [5.72] Post No. 1 Base Part Numbers Straight Posts Right-Angle Posts Without With Without With Retentive Legs Retentive Legs Retentive Legs Retentive Legs Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 640456 2–28 644874 2–28 640457 2–28 644875 2–28 Standard UL94V-0, .000030 [0.00076] Gold Plated 641215 32–58 —— 641216 32–58 —— Standard UL94V-0, .000015 [0.00038] Gold Plated 641126 32–58 —— 641127 32–58 —— .125 [3.18] Ref. 34° .135□ [3.43] 34° Retentive Leg Retentive Leg Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .100 [2.54] Typ. Edge of Board .130 [3.30] Min. .050/.040 [1.27/1.02] Dia. for straight leg headers Dia. for retentive leg headers .037 [0.94 ] ± .002 ± 0.05 .100 [2.54] Typ. Edge of Board X .050/.040□ [1.27/1.02] Dia. for straight □ leg headers Dia. for retentive□ leg headers .037 [0.94 ] ± .002 ± 0.05 max. when mated with MTA-100 Connector. max. when mated with CST -100 II Connector. Note: Consult Product Drawing for details on placing headers onto PC boards. MTA-100 Friction Lock Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Page_Head (Continued) Material and Finish Housing— UL94V-0 rated, thermo- plastic, black Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647609 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647609-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 647609-2 3-647609-2 3 647609-3 3-647609-3 4 647609-4 3-647609-4 5 647609-5 3-647609-5 6 647609-6 3-647609-6 7 647609-7 3-647609-7 8 647609-8 3-647609-8 9 647609-9 3-647609-9 10 1-647609-0 4-647609-0 11 1-647609-1 4-647609-1 12 1-647609-2 4-647609-2 Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Friction Lock Polarized Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .070 [1.78] Min. Ø .052 ± .002 [1.32 ± 0.05] .100 [2.54] .090 [2.29] Ø .040 ± .003 [1.02 ± 0.07 ] Typ. .025 ± .001 [0.64 ± 0.03] Square Typ. .113 [2.87] A .250 [6.35] .025-.040 [0.64-1.01] .070 [1.78] .135 [3.43] .290 ± .010 [13.97 ± 0.25] .125 [3.18] .050 [1.27] .100 [2.54] Typ. Post No.1 .025 ± .001 [0.64 ± 0.03] Square Typ. .113 [2.87] A .250 [6.35] .055 [1.39] .055 [1.40].070 [1.78] .135 [3.43] .290 ± .010 [13.97 ± 0.25] .125 [3.18] .050 [1.27] Typ..100 [2.54] Post No. 1 Min. Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Polarized Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647609 32-42 647623 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647626 32-42 647624 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647627 32-42 647625 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-100 Headers with Retention Peg—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing— UL94V-0 rated, thermo- plastic, black Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. 4. This product can be mounted in the middle of the PC Board as shown in the PCB layout. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with right-angle posts would be: Base number 647630 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647630-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647630-2 3 3-647630-3 4 3-647630-4 5 3-647630-5 6 3-647630-6 7 3-647630-7 8 3-647630-8 9 3-647630-9 10 4-647630-0 11 4-647630-1 12 4-647630-2 Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. .250 [6.35] .113 [2.87] A .025 [0.64] Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .112 [2.84] .040 [1.02] Max. .125 [3.18] Post No. 1 .113 [2.87] .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 [6.35] .347 [8.81] .140 [3.56] A Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .100 [2.54] Typ. .040 ± .003 [1.02 ± 0.07] Dia. Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Friction Lock Polarized Right-Angle Posts Right-Angle Posts Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647630 32-42 647651 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647629 32-42 647653 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647628 32-42 647652 32-42 Friction Lock Right-Angle Post (.025 [0.64] Square) Polarized Right-Angle Post (.025 [0.64] Square) Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-100 High Profile Headers—Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Page_Head (Continued) Material and Finish Housing — 2–12 Position — UL94V-0 rated, nylon, black 13–18 Position — UL94V-0 rated, LCP , black Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647047 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647047-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647047-2 thru 12 4-647047-2 13 NA thru 18 NA See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Straight Post (.025 [0.64] Square) .113 [2.87] A .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .135 [3.43] .550 [13.97] .070 [1.78] .125 [3.18] .250 [6.35] .347 [8.81] Right-Angle Post (.025 [0.64] Square) .113 [2.87] .025 [0.64] Sq. .100 [2.54] .050 [1.27] Post No. 1 .290 [7.37] .125 [3.18] .070 [1.78] .112 [2.84] .250 [6.35] .347 [8.81] .140 [3.56] A Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board .300 [7.62] .150 [3.81] .100 [2.54] Typ. .040 [1.02] Pre-Tinned Plated Thru Hole Typ. .060 [1.52] Pre-Tinned Land Both Sides Typ. .008□ [0.20] Min. Thk. Solder Paste In Area Shown .065 [1.65] .0325 [0.826] Post No. 1 For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Straight Posts (Tube Loaded) Right-Angle Posts Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 647047 32–42 647298 32–42 647048 32–42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647109 32–42 647300 32–42 647114 32–42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647075 32–42 647299 32–42 647076 32–42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-100 Polarized High Temperature Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing — 2–12 Position — UL94V-0 rated, nylon, black 13–18 Position — UL94V-0 rated, LCP , black Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts would be: Base number 647050 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647050-0 All part numbers are the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 647050-2 3-647050-2 thru 12 1-647050-2 4-647050-2 13 1-647050-3 NA thru 18 1-647050-8 NA See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Straight Post (.025 [0.64] Square) Right-Angle Post (.025 [0.64] Square) Base Part Numbers Straight Posts Straight Posts (Tube Loaded) Right-Angle Posts Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 647050 32-42 647295 32-42 647051 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647116 32-42 647297 32-42 647117 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647078 32-42 647296 32-42 647079 32-42 Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board .300 [7.62] .150□ [3.81] .100 [2.54] Typ. .040 [1.02] Pre-Tinned Plated□ Thru Hole Typ. .060 [1.52] Pre-Tinned Land□ Both Sides Typ. .008□ [0.20] Min. Thk. Solder□ Paste In Area Shown .065 [1.65] .0325 [0.826] Post No. 1 .250 [6.35] .113 [2.87] A .025 [0.64] Sq. .050 [1.27].100 [2.54] .130 [3.30] .550 [13.97] .347 [8.81] .290 [7.37] .040 [1.02] Max. .125 [3.18] Post No. 1 .250 [6.35] .113 [2.87] A .025 [0.64]□ Sq. .050□ [1.27].100 [2.54] .347 [8.81] .290□ [7.37] .112 [2.84] .040□ [1.02] Max. .125 [3.18] Post No. 1 For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Note: Consult Product Drawing for details on placing headers onto PC boards. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-100 Friction Lock High Temperature Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Material and Finish Housing — 2–12 Position — UL94V-0 rated, nylon, black 13–18 Position — UL94V-0 rated, LCP , black Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. To determine header overall length (dim. A) multiply .100 x the number of posts. Example: .100 x 10 posts equals 1.000 inch [25.4 mm]. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14, 15 and 31. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position sur- face mount polarized header would be: Base number 647106 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647106-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647106-2 12 4-647106-2 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Polarized Header Friction Lock Header Recommended PC Board Layout for use with .010 [0.25] Thick Stencil .250 [6.35] .318 [8.08] Ref. .113 [2.87] .025 [0.64] Sq. .050 [1.27].100 [2.54] .347 [8.81] .290 [7.37] .070 [1.78] .125 [3.18] .159 [4.04] Typ. Post No. 1 .250□ [6.35] .318 [8.08] Ref. .113 [2.87] .025 [0.64] Sq. .050 [1.27].100 [2.54] .347□ [8.81] .290 [7.37] .040□ [1.02] Max. .125 [3.18] .159□ [4.04] Post No. 1 .235 [5.97] .100 [2.54] Typ. .060 [1.52] .070 [1.78] Post No. 1 Note: Consult Product Drawing for details on placing headers onto PC boards. For use with Infrared Reflow Process Maximum Temperature Rating: 2–12 Position: 280°C 13–18 Position: 235°C Base Part Numbers Polarized Headers Friction Lock Headers Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647106 32-42 647166 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 647108 32-42 647168 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647107 32-42 647167 32-42 Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-100 Polarized and Friction Lock Surface Mount Headers—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 Tape Mount Part Numbers Polarized Headers Friction Lock Headers Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647531 32-42 647502 32-42 Standard UL94V-0, .000030 [0.00076] Gold Plated 1744163 32-42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647467 32-42

.100 [2.54] Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square)Material and Finish Housing— UL94V-0 rated, polyester, black Posts— Copper alloy, tin plated; or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated post are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 14 and 15. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644486 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-644486-0 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Notes: 1. Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. 2. MTA-100 shrouded headers do not mate with CST -100 II hous- ings. A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] Ref. .107 [2.72] Ref. .125 [3.18] .200 [5.08] .440 [11.18] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Polarized Retention Peg .042 [1.07] .100 [2.54] Typ. .081/.075 [2.06/1.91] .124 [3.15] Edge of Board .125 [3.18] Min. .050/.040 [1.27/1.02] Dia. Dia. A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Typ. Ref. Post No. 1 .313 [7.95] .410 [10.41] .176 [4.47]□ Ref. .130□ [3.30] .200□ [5.08] .050 [1.27]□ Max..137 [3.48] Ref. .100□ [2.54]□ Typ. Edge of Board .300 [7.62] Max. .050/.040 [1.27/1.02]Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Header Length No. of Dim. Prefix/ Circuits A Suffix 2 .284 3- -27.21 3 .384 3- -39.75 4 .484 3- -412.29 5 .584 3- -514.83 6 .684 3- -617.37 7 .784 3- -719.91 8 .884 3- -822.45 9 .984 3- -924.99 No. of Dim. Prefix/ Circuits A Suffix 10 1.084 4- -027.53 11 1.184 4- -130.07 12 1.284 4- -232.61 13 1.384 4- -335.15 No. of Dim. Prefix/ Circuits A Suffix 14 1.484 4- -437.69 No. of Dim. Prefix/ Circuits A Suffix .206 [5.23]□ Ref. .130□ [3.30] Ref. Rear Bend Front Bend Note: Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Straight Posts Right-Angle Posts With Without Without Pegs Only Pegs Pegs Front Bend Rear Bend Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 644486 22-34 644861 22-34 644488 22-34 644803 22-34 Standard UL94V-0, .000030 [0.00076] Gold Plated 644487 22-34 —— 644489 22-34 —— MTA-100 Shrouded Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.100 [2.54] Product Facts I Low cost wire-to-board interconnections I Wide wire range for single contact I Tin and gold plated contacts I Mates with specified MTA and similar competitive notched headers I Plastic latching feature in housing helps prevent con- tact backout I Locking ramps and polariz- ing tabs are standard I For keying purposes use keying plug 641994-1 (page 17) I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR7189 For mateability options, see matrix on pages 12 and 13. For mating half visuals, see pages 21 thru 29 and 32. See page 15 for an explanation of RoHS lead free equivalents. .260□ [6.60]□ Ref. .510□ [12.95] .190 [4.83] A .100 [2.54] Typ. .060□ [1.52]□ Typ. Performance Data Voltage Rating— 250 vac Current Rating— 4 amp max. Low-Level Resistance— 6 m/H9024 max. initial; 10 m/H9024max. final Insulation Resistance— 1000 M/H9024 min. initial; 100 M/H9024min. final Operating Temperature— /H1100255/H11034C to/H11001105/H11034C Technical Documents Product Specification 108-1948 Application Specification 114-13036 Instruction Sheet 408-8493 No. of Dim. Part Pos. A Numbers 2 .220 1375820-25.59 3 .320 1375820-38.13 4 .420 1375820-410.67 5 .520 1375820-513.21 6 .620 1375820-615.75 7 .720 1375820-718.29 8 .820 1375820-820.83 9 .920 1375820-923.37 10 1.020 1-1375820-025.91 11 1.120 1-1375820-128.45 12 1.220 1-1375820-230.99 13 1.320 1-1375820-333.53 14 1.420 1-1375820-436.07 15 1.520 1-1375820-538.61 No. of Dim. Part Pos. A Numbers 16 1.620 1-1375820-641.15 17 1.720 1-1375820-743.69 18 1.820 1-1375820-846.23 19 1.920 1-1375820-948.77 20 2.020 2-1375820-051.31 21 2.120 2-1375820-153.85 22 2.220 2-1375820-256.39 23 2.320 2-1375820-358.93 24 2.420 2-1375820-461.47 25 2.520 2-1375820-564.01 26 2.620 2-1375820-666.55 27 2.720 2-1375820-769.09 28 2.820 2-1375820-871.63 Application Tooling Loose Piece Contacts— Hand Tool No. 58517-3 (408-4064) Strip Contacts— AMP-O-LECTRIC Model “G” Termination Machine* Applicator No. 567373-3 (Request Catalog 65828) AMP-O-MATIC Stripper-Crimper Machine* Applicator No. 567910-1 or 567827-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IIIG Lead Making Machine* (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. Contacts Part Numbers Tin Plated 15 Au Gold Plated 30 Au Gold Plated 1375819-1 (Strip) 1375819-2 (Strip) 1375819-3 (Strip) 1445336-1 (Loose Piece) 1445336-2 (Loose Piece) 1445336-3 (Loose Piece) Material and Finish (RoHS Compliant) Phosphor bronze, pretinned or .000015 [.00038] gold, over nickel .000030 [0.00076] gold over nickel Wire Range — 22–26 AWG [0.35–0.13 mm 2] Housing* Material (RoHS Compliant) UL94V-0 rated, nylon, white .195 [4.95] .440 [11.17] .016±.002 [.406±.051] *Housings without polarizing tabs may be manufactured upon request. Minimums may apply. Contact product engineering or product manager for details. .100 [2.54] Centerline CST-100 II Crimp Contacts and Housings MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

With Without Right-Angle Posts Pegs Pegs Without Pegs Only Header No. of Header No. of Header No. of Part Nos. Posts/ Part Nos. Posts/ Part Nos. Posts/ RoHS Equiv. RoHS Equiv. RoHS Equiv. Standard UL94V-0, Tin Plated 644893 32-44 644892 32-44 644894 32-44 Standard UL94V-0, .000030 [0.00076] Gold Plated 644897 32-44 644896 32-44 644898 32-44 CST-100 II .100 [2.54] Straight Post (.025 [0.64] Square) Right-Angle (.025 [0.64] Square)Material and Finish Housing— UL94V-0 rated, polyester, black Posts— Copper alloy, tin plated; or .000030 [0.00076] gold over nickel A .025 [0.64] Typ. .100 [2.54] .092 [2.34] Ref. Post No. 1 .313 [7.95] .410 [10.41] .140 [3.56] .176 [4.47] Ref. .107 [2.72] Ref. .125 [3.18] .280 [7.11] .520 [13.21] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) .042 [1.07] .100 [2.54] Typ. .081/.075 [2.06/1.91] .124 [3.15] Edge of Board .125 [3.18] Min. .050/.040 [1.27/1.02] Dia. Dia. Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Headers with .000015 [0.00038] gold plated posts are available upon request. Minimums may apply. 3. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. For mateability options, see matrix on pages 12 and 13. For mating half visuals, see page 31. A .025 [0.64] Typ. .100 [2.54] .036 [0.91] Max. .092 [2.34] Typ. Post No. 1 .313 [7.95] .176□ [4.47] Ref. .107□ [2.72] Ref. .140 [3.56] .280□ [7.11] .100 [2.54] Typ. Edge of Board .450 [11.43] Max. .050/.040 [1.27/1.02]Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board (Solder Side of Board Shown) Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight posts and with pegs would be: Base number 644893 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-644893-0 All part numbers are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644893-2 thru 14 4-644893-4 See page 15 for an explanation of RoHS lead free equivalents. Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: CST -100 II shrouded headersonly mate with CST -100 II housings. All the MTA-100 headers except the MTA-100 shrouded headers mate with CST -100 II housings. Header Length No. of Dim. Prefix/ Circuits A Suffix 2 .284 3- -27.21 3 .384 3- -39.75 4 .484 3- -412.29 5 .584 3- -514.83 6 .684 3- -617.37 7 .784 3- -719.91 No. of Dim. Prefix/ Circuits A Suffix 8 .884 3- -822.45 9 .984 3- -924.99 10 1.084 4- -027.53 No. of Dim. Prefix/ Circuits A Suffix Note: Consult Product Drawing for details on placing headers onto PC boards. Polarized Retention Peg CST-100 II Shrouded Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Product Facts I Connectors and headers for 2 through 24 positions; wire sizes of 18, 20, 22, 24 and 26 AWG [0 .9– 0.12 mm 2 ] I Connectors and headers, except shrouded headers, are end-to-end stackable I Quad Connectors for higher current rating (page 54) I Posted connectors for 2,3, 4,6,9,12,15 and 24 posi- tions I Card edge connectors for 3, 6, 9,12,15,18 and 20 through 24 positions I Connectors preloaded with IDC contacts I All contacts are slotted for insulation displacement (IDC) termination technique I Connector styles include both closed end and feed- thru, with and without lock- ing ramps and polarizing tabs I Molded ribs on housing do not allow reverse mating I Contacts are lubricated for fretting corrosion protection I Benefits derived from the MTA-156 system include increases quality and ease of handling such as— I One-step assembly I No wire stripping I No contact damage I Reduced wiring errors I Simpler tooling I Simple maintenance and repair I Meets the material require- ments of Table 23.1 of UL 1410 Standards for Television Receiver and Video Products (wire-to- post connectors only) I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR7189 R R MTA-156 connectors accept discrete and ribbon cable wire sizes ranging from 18 – 26 AWG [0.9– 0.12 mm2] with maxi- mum insulation outside diameter.095 [2.41] for sin- gle wire and .070 [1.78] for mass termination of wires. Tin plated solid, fused stranded or stranded (7, 16, and 19 strands) wire with PVC insulation can be used on 18 AWG [0.8 – 0.9 mm MTA-156 connectors; 7, 10, and 19 stranded wire on 20 AWG [0.5 – 0.6 mm2 ] MTA-156 connectors; and 7 and 19 stranded wire on 22 – 26 AWG [0.4 –0.12 mm 2] MTA-156 connectors. Only one wire to be termi- nated into an IDC contact slot. Mass termination of wire provides the lowest applied cost because it drastically reduces the labor content of virtually any cable or har- ness assembly required. Technical Documents Product Specification 108-1051 MTA-156 Connectors Application Specifications 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors 114-1032 MTA-156 Ribbon Cable Assembly Note: Refer to page 70 for approved wire listings. Performance Data* Voltage Rating— 600 vac Current Rating— 7 amp max. for MTA-156 Connector Low-Level Resistance— 3.0 m/H9024max. initial Dielectric Withstanding Voltage— 2200 vac/1 min. Insulation Resistance— 5000 M/H9024min. initial Operating Temperature— /H1100255/H11034C to/H11001105/H11034C *Refer to the Product Specification for additional electrical, mechanical and environmental performance tests and requirements. The wire-to-post connector housing material is flame retardant thermoplastic, either UL94V-2 or UL94V-0 rated. A full line of .156 [3.96] centerline headers com- pletes the system. Headers are available with straight or right-angle posts, in flat friction lock and shrouded styles. Headers are available in 2 through 24 positions. .156 [3.96] Centerline MTA-156 IDC Connectors and Headers MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] MTA-156 Connector/ Header Mateability Guide Matrix for Tin Plated Part Numbers This matrix has been prepared to assist you, our customer, in defin- ing the correct mating halves for the MTA-156 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Headers Connectors

640426 YYYNYYYYYYNYYYYYY

640427 YYYNYYYYYYNYYYYYY

640428 YYYNYYYYYYNYYYYYY

640429 YYYNYYYYYYNYYYYYY

640430 YYYNYYYYYYNYYYYYY

640431 YYYYYYYYYYYYYYYYY

640432 YYYYYYYYYYYYYYYYY

640433 YYYYYYYYYYYYYYYYY

640434 YYYYYYYYYYYYYYYYY

640435 YYYYYYYYYYYYYYYYY

640472 YYYNYYYYYYNYYYYYY

640473 YYYNYYYYYYNYYYYYY

640474 YYYNYYYYYYNYYYYYY

640475 YYYNYYYYYYNYYYYYY

640476 YYYNYYYYYYNYYYYYY

640477 YYYYYYYYYYYYYYYYY

640478 YYYYYYYYYYYYYYYYY

640479 YYYYYYYYYYYYYYYYY

640480 YYYYYYYYYYYYYYYYY

640481 YYYYYYYYYYYYYYYYY

640595 YYYNYYYYYYNYYYYYY

640599 YYYNYYYYYYNYYYYYY

640600 YYYNYYYYYYNYYYYYY

640601 YYYNYYYYYYNYYYYYY

640602 YYYNYYYYYYNYYYYYY

640604 YYYYYYYYYYYYYYYYY

640605 YYYYYYYYYYYYYYYYY

640606 YYYYYYYYYYYYYYYYY

640607 YYYYYYYYYYYYYYYYY

640608 YYYYYYYYYYYYYYYYY

641301 YYYNYYYYYYNYYYYYY

641302 YYYNYYYYYYNYYYYYY

641303 YYYNYYYYYYNYYYYYY

641304 YYYNYYYYYYNYYYYYY

641305 YYYNYYYYYYNYYYYYY

641306 YYYYYYYYYYYYYYYYY

641307 YYYYYYYYYYYYYYYYY

641308 YYYYYYYYYYYYYYYYY

641309 YYYYYYYYYYYYYYYYY

641310 YYYYYYYYYYYYYYYYY

643817 YYYNYYYYYYNYYYYYY

643818 YYYNYYYYYYNYYYYYY

643819 YYYNYYYYYYNYYYYYY

643820 YYYNYYYYYYNYYYYYY

643821 YYYNYYYYYYNYYYYYY

644082 YYYYYYYYYYYYYYYYY

644461 YYYYYYYYYYYYYYYYY

644462 YYYYYYYYYYYYYYYYY

644463 YYYYYYYYYYYYYYYYY

644464 YYYYYYYYYYYYYYYYY

644465 YYYNYYYYYYNYYYYYY

644466 YYYNYYYYYYNYYYYYY

644467 YYYNYYYYYYNYYYYYY

644468 YYYNYYYYYYNYYYYYY

644469 YYYYYYYYYYYYYYYYY

644470 YYYYYYYYYYYYYYYYY

644471 YYYYYYYYYYYYYYYYY

644472 YYYYYYYYYYYYYYYYY

644501 YYYYYYYYYYYYYYYYY

644502 YYYYYYYYYYYYYYYYY

644566 YYYYYYYYYYYYYYYYY

644567 YYYYYYYYYYYYYYYYY

644569 YYYYYYYYYYYYYYYYY

644570 YYYYYYYYYYYYYYYYY

644572 YYYYYYYYYYYYYYYYY

644783 YYYNYYYYYYNYYYYYY

644791 YYYYYYYYYYYYYYYYY

644860 YYYNYYYYYYNYYYYYY

644878 YYYNYYYYYYNYYYYYY

6403836403846403856403876403886403896404456446116446126446136446146446156446166446176447496447506447516447526447536447546447556471236471246471256471266471276471286471296471306472106472116472126472276472286472296472306476466476481744017 Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YNYYYNYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YNYYYNYYY Y YYYYYYYYY Y YNYYYNYYY Y YNYYYNYYY MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] 644763 This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Headers 641202641203641204641207641208641209641210644627644628644629644630644631644632644633644756644757644758644759644760644761644762647131647132647133647134647135647136

641217 YYYNYYYYYYNYYYYYY

641218 YYYNYYYYYYNYYYYYY

641219 YYYNYYYYYYNYYYYYY

641220 YYYNYYYYYYNYYYYYY

641221 YYYNYYYYYYNYYYYYY

641222 YYYYYYYYYYYYYYYYY

641223 YYYYYYYYYYYYYYYYY

641224 YYYYYYYYYYYYYYYYY

641225 YYYYYYYYYYYYYYYYY

641226 YYYYYYYYYYYYYYYYY

641227 YYYNYYYYYYNYYYYYY

641228 YYYNYYYYYYNYYYYYY

641229 YYYNYYYYYYNYYYYYY

641230 YYYNYYYYYYNYYYYYY

641231 YYYNYYYYYYNYYYYYY

641232 YYYYYYYYYYYYYYYYY

641233 YYYYYYYYYYYYYYYYY

641234 YYYYYYYYYYYYYYYYY

641235 YYYYYYYYYYYYYYYYY

641236 YYYYYYYYYYYYYYYYY

644460 YYYNYYYYYYNYYYYYY

644662 YYYNYYYYYYNYYYYYY

644663 YYYNYYYYYYNYYYYYY

644687 YYYYYYYYYYYYYYYYY

644718 YYYNYYYYYYNYYYYYY

644720 YYYNYYYYYYNYYYYYY

641113641114641115641118641119641120641121644764644765644766644767644768644769647139647140647141647142647143647144647649 Connectors Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYYYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYNYYYYYY Y YYYYYYYYY Y YYNYYYYYY Y YYNYYYYYY

641148 YYYNYYYYYYYYYNYYYYYYY

641149 YYYNYYYYYYYYYNYYYYYYY

641150 YYYNYYYYYYYYYNYYYYYYY

641151 YYYNYYYYYYYYYNYYYYYYY

641152 YYYNYYYYYYYYYNYYYYYYY

641153 YYYYYYYYYYYYYYYYYYYYY

641154 YYYYYYYYYYYYYYYYYYYYY

641155 YYYYYYYYYYYYYYYYYYYYY

641156 YYYYYYYYYYYYYYYYYYYYY

641157 YYYYYYYYYYYYYYYYYYYYY

641168 YYYNYYYYYYYYYNYYYYYYY

641169 YYYNYYYYYYYYYNYYYYYYY

641170 YYYNYYYYYYYYYNYYYYYYY

641171 YYYNYYYYYYYYYNYYYYYYY

641172 YYYNYYYYYYYYYNYYYYYYY

641173 YYYYYYYYYYYYYYYYYYYYY

641174 YYYYYYYYYYYYYYYYYYYYY

641175 YYYYYYYYYYYYYYYYYYYYY

641176 YYYYYYYYYYYYYYYYYYYYY

641177 YYYYYYYYYYYYYYYYYYYYY

644284 YYYNYYYYYYYYYNYYYYYYY

647478 YYYNYYYYYYYYYNYYYYYYY

647479 YYYNYYYYYYYYYNYYYYYYY

647496 YYYYYYYYYYYYYYYYYYYYY

MTA-156 Connector/Header Mateability Guide(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts— Phosphor bronze, post tin plated, .000030 [0.00076] or .000015 [.00038] post gold plated over nickel Closed End with Locking Ramp Closed End without Locking Ramp without Polarizing Tabs with Polarizing Tabs without Polarizing Tabs with Polarizing Tabs Color Coding by Wire Size for UL94V-2 Connectors

20 AWG — Yellow

18 AWG — Orange

All Wire Sizes in UL94V-0— Black .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26].355 [9.02] .230 [5.84] .156 [3.96] Typ. A .050 [1.27] .097□ [2.46] .100 [2.54] .258 [6.56] .050 [1.27] .725 [18.42] .245 [6.22] .325 [8.26].355 [9.02] .180 [4.57] .050 [1.27] .156□ [3.96] Typ. A .047□ [1.19] .100 [2.54] .258 [6.56] .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). For mateability options, see matrix on pages 34 and 35. Mating half visuals for Closed End Connectors without Locking Ramp, see pages 46 thru 53. Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying pur- poses. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. MTA-156 IDC Connectors—Closed End MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Base Part Numbers Closed End with Locking Ramp Closed End without Locking Ramp Without Tabs With Tabs Without Tabs With Tabs Connector Type Connector Connector Connector Connector& Wire Size Part RoHS Part RoHS Part RoHS Part RoHS Standard UL94V-2, Tin Plated

18 AWG 640426 32–54 643817 32–54 640431 32–54 644461

32–440.8–0.9 mm 2

20 AWG 640427 32–54 643818 32–54 640432 32–54 644462

32–440.5–0.6 mm 2

22 AWG 640428 32–54 643819 32–54 640433 32–54 644463

32–440.3–0.4 mm 2

24 AWG 640429 32–54 643820 32–54 640434 32–54 644464

32–440.2 mm 2 26 AWG 640430 32–54 643821 32–54 640435 32–54 ——0.12–0.15 mm 2 Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 640472 32–54 644878 32–54 640477 32–54 ——0.8–0.9 mm 2 20 AWG 640473 32–54 —— 640478 32–54 ——0.5–0.6 mm 2

22 AWG 640474 32–54 644783 32–54 640479 32–54 644791

32–440.3–0.4 mm 2 24 AWG 640475 32–54 —— 640480 32–54 ——0.2 mm 2 26 AWG 640476 32–54 —— 640481 32–54 ——0.12–0.15 mm 2 Standard UL94V-2, .000030 [0.00076] Gold Plated

18 AWG 641217 32–54 644460

32–42 641222 32–54 ——0.8–0.9 mm 2

20 AWG 641218 32–54 644663

32–42 641223 32–54 ——0.5–0.6 mm 2

22 AWG 641219 32–54 644662

32–42 641224 32–54 644687 32–440.3–0.4 mm 2 24 AWG 641220 32–54 —— 641225 32–54 ——0.2 mm 2 26 AWG 641221 32–54 —— 641226 32–54 ——0.12–0.15 mm 2 Standard UL94V-2, .000015 [0.00038] Gold Plated

18 AWG 641148 32–54 644284

32–42 641153 32–54 ——0.8–0.9 mm 2 20 AWG 641149 32–54 —— 641154 32–54 ——0.5–0.6 mm 2

22 AWG 641150 32–54 647478

32–42 641155 32–54 ——0.3–0.4 mm 2 24 AWG 641151 32–54 —— 641156 32–54 ——0.2 mm 2 26 AWG 641152 32–54 —— 641157 32–54 ——0.12–0.15 mm 2 Standard UL94V-0, Tin Plated (Black in color)

18 AWG 644860

32–42 —— 644502 32–42 644082 32–420.8–0.9 mm 2

22 AWG ———— 644501

32–42 644566 32–420.3–0.4 mm 2 1 Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described connec- tors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end con- nector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640426 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-640426-0 All part numbers inbold face are the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640426-2 3 3-640426-3 4 3-640426-4 5 3-640426-5 6 3-640426-6 7 3-640426-7 8 3-640426-8 9 3-640426-9 10 4-640426-0 11 4-640426-1 12 4-640426-2 13 4-640426-3 14 4-640426-4 15 4-640426-5 16 4-640426-6 17 4-640426-7 18 4-640426-8 19 4-640426-9 20 5-640426-0 21 5-640426-1 22 5-640426-2 23 5-640426-3 24 5-640426-4 Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. MTA-156 IDC Connectors—Closed End (Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-2 rated, nylon, see below for color; or UL94V-0 rated, nylon, black Contacts— Phosphor bronze; post tin plated, .000030 [.00076] or .000015 [.00038] post gold plated over nickel Feed-Thru with Locking Ramp Feed-Thru without Locking Ramp without Polarizing Tabs with Polarizing Tabs without Polarizing Tabs with Polarizing Tabs .725 [18.42] .245 [6.22] .325 [8.26] .385 [9.78] .180 [4.57] .156□ [3.96] Typ. A .050 [1.27] .047□ [1.19] .258 [6.56] .050 [1.27] .100 [2.54] .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .385 [9.78] .230 [5.84] .156 [3.96] Typ. A .050 [1.27] .097□ [2.46] .100 [2.54] .258 [6.56] .050 [1.27] For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed–Thru Connectors with Locking Ramp, see pages 45 thru 48, 50, 52, and 53, (49 and 51 Front Bend Headers Only). For mateability options, see matrix on pages 34 and 35. Mating half visuals for Feed–Thru Connectors without Locking Ramp, see pages 46 thru 53. Color Coding by Wire Size for UL94V-2 Connectors All Wire Sizes in UL94V-0— Black Notes: 1. Only connectors with locking ramp and without polarizing tabs mate with posted connectors on page 45. 2. Refer to pages 70 thru 74 for approved wire listing. 3. For strain reliefs and dust covers, see pages 40 and 41. 4. For keying plugs and panel mount end caps, see page 42. 5. Other circuit sizes are available upon request. Minimums may apply. 6. Connector circuits can be molded closed for keying pur- poses. Minimums may apply. 7. Where no part numbers appear in the chart, parts can be made available upon request. Minimums may apply. 8. To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. MTA-156 IDC Connectors—Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and num- ber of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 10-position feed-thru con- nector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 640599 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-640599-0 The part numbers inbold faceare the RoHS equiva- lent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640599-2 3 3-640599-3 4 3-640599-4 5 3-640599-5 6 3-640599-6 7 3-640599-7 8 3-640599-8 9 3-640599-9 10 4-640599-0 11 4-640599-1 12 4-640599-2 13 4-640599-3 14 4-640599-4 15 4-640599-5 16 4-640599-6 17 4-640599-7 18 4-640599-8 19 4-640599-9 20 5-640599-0 21 5-640599-1 22 5-640599-2 23 5-640599-3 24 5-640599-4 Note: All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Base Part Numbers Feed-Thru with Locking Ramp Feed-Thru without Locking Ramp Without Tabs With Tabs Without Tabs With Tabs Connector Type Connector Connector Connector Connector& Wire Size Part RoHS Part RoHS Part RoHS Part RoHS Standard UL94V-2, Tin Plated

18 AWG 640599 32–54 644465

32–44 640604 32–54 644469 32–440.8–0.9 mm 2

20 AWG 640600 32–54 644466

32–44 640605 32–54 644470 32–440.5–0.6 mm 2

22 AWG 640601 32–54 644467

32–44 640606 32–54 644471 32–440.3–0.4 mm 2

24 AWG 640602 32–54 644468

32–44 640607 32–54 644472 32–440.2 mm 2 26 AWG 640595 32–54 —— 640608 32–54 ——0.12–0.15 mm 2 Tape Mounted on Reel UL94V-2, Tin Plated 18 AWG 641302 32–54 —— 641306 32–54 ——0.8–0.9 mm 2 20 AWG 641303 32–54 —— 641307 32–54 ——0.5–0.6 mm 2 22 AWG 641304 32–54 —— 641308 32–54 ——0.3–0.4 mm 2 24 AWG 641305 32–54 —— 641309 32–54 ——0.2 mm 2 26 AWG 641301 32–54 —— 641310 32–54 ——0.12–0.15 mm 2 Standard UL94V-2, .00003 [.00076] Gold Plated

18 AWG 641227 32–54 644718

32–44 641232 32–54 ——0.8–0.9 mm 2 20 AWG 641228 32–54 —— 641233 32–54 ——0.5–0.6 mm 2

22 AWG 641229 32–54 644720

32–44 641234 32–54 ——0.3–0.4 mm 2 24 AWG 641230 32–54 —— 641235 32–54 ——0.2 mm 2 26 AWG 641231 32–54 —— 641236 32–54 ——0.12–0.15 mm 2 Standard UL94V-2, .000015 [.00038] Gold Plated

18 AWG 641168 32–54 647479

32–42 641173 32–54 ——0.8–0.9 mm 2 20 AWG 641169 32–54 —— 641174 32–54 ——0.5–0.6 mm 2

22 AWG 641170 32–54 647496

32–42 641175 32–54 ——0.3–0.4 mm 2 24 AWG 641171 32–54 —— 641176 32–54 ——0.2 mm 2 26 AWG 641172 32–54 —— 641177 32–54 ——0.12–0.15 mm 2 Standard UL94V-0, Tin Plated

18 AWG ———— 644567

32–42 644570 32–420.8–0.9 mm 2

22 AWG ———— 644569

32–42 644572 32–420.3–0.4 mm 2 1 Other circuit sizes are available upon request. Minimums may apply. Note: Blocked circuit configurations are available upon request. Contact product engineer or product manager for details. Minimums may apply. MTA-156 IDC Connectors—Feed-Thru(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] A .130 [3.30] .105□ [2.67] .440□ [11.18] .335 [8.51] Retention Dimple .127 [3.23] .440 [11.18] Note: This portion of front locking bar □ may or may not be present A .335 [8.51] Closed End Covers Material (RoHS Compliant) Strain Relief Covers— UL94V-2 rated, nylon, white Dust Covers — UL94V-0 rated, polyester, white Strain Relief Covers Dust Covers Base Part Numbers Closed End Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643067 2–24 640551 2–24 Cover Length No. of Dim. Prefix/ Circuits A Suffix 2 .312 -27.92 3 .468 -311.89 4 .624 -415.85 5 .780 -519.81 6 .936 -623.77 7 1.092 -727.74 8 1.248 -831.7 9 1.404 -935.66 10 1.560 1- -039.62 11 1.716 1- -143.59 12 1.872 1- -247.55 13 2.028 1- -351.51 14 2.184 1- -455.47 15 2.340 1- -559.44 16 2.496 1- -663.4 17 2.652 1- -767.36 No. of Dim. Prefix/ Circuits A Suffix No. of Dim. Prefix/ Circuits A Suffix 18 2.808 1- -871.32 19 2.964 1- -975.29 20 3.120 2- -079.25 21 3.276 2- -183.21 22 3.432 2- -287.17 23 3.588 2- -391.14 24 3.744 2- -495.1 Cover Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 10-position closed-end strain relief cover would be: Base number 643067 plus prefix-and-suffix 1-— -0 The correct ordering number is 1-643067-0 Feed-Thru Covers Material (RoHS Compliant) Strain Relief Covers— UL94V-2 rated, nylon, white Dust Covers — UL94V-0 rated, polyester, white Strain Relief Covers Dust Covers .127 [3.23] .470 [11.94] Note: This portion of front locking bar □ may or may not be present A A .325□ [8.26] .475□ [12.07] .130□ [3.3] Retention Dimple Base Part Numbers Feed-Thru Strain Relief Dust Covers Covers Cover No. of Cover No. of Part Nos. Circuits Part Nos. Circuits 643071 2–24 640643 2–24 MTA-156 Connector Accessories MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Crimp Snap-in Contacts Material and Finish Contacts— Phosphor bronze, tin plated .110 [2.79] .105 [2.67] .580 [14.73] .165 [4.19]Max. Wire Size Part Nos. AWG mm 2 Loose Piece* Strip 26–22 .12–0.3 640557-3 640556-3 22–18 0.3–0.9 640559-3 640558-3 Hand Tool No. 59837-1 (408-6528) **AMP-O-LECTRIC Model “G” Termination Machine (Request Catalog 65828) Note: Requires applicator. For part number, call Technical Support. Special applications for crimp snap-in contacts are: 1. Double wire per contact 2. Coax or shielded wire 3. Mixed wire size in same connector Note: Only one crimp snap-in contact per connector. Wire Size Part Numbers AWG mm 2 Tin Plated .000030 [0.00076] .000015 [0.00038] Gold Plated Gold Plated 18 0.8–0.9 640631-3 641143-4 641143-3 20 0.5–0.6 640632–3 641144-4 641144-3 22 0.3–0.4 640633-3 641145-4 641145-3 24 0.2 640634-3 641146-4 641146-3 26 0.12–0.15 640635-3 641147-4 641147-3 Replacement IDC Contacts Material and Finish Contacts— Phosphor bronze, post tin plated; .000030 [0.00076] or .000015 [0.00038] post gold plated over nickel Note: Tyco Electronics does not rec- ommend terminating an MTA contact more than one time. Use replacement contacts when required for field repairs or wire changes. .637 [16.18] .125 [3.18] MTA-156 Connector Accessories(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] .375 [9.52] .300 [7.62] .065 [1.65] .051 [1.30] .066 [1.68] .070 [1.78] Dia. .300 [7.62] .085 [2.16] .065 [1.65] .051 [1.30] .066 [1.68] .453 [11.5] .578□ [14.7] .010□ [.254] Max. R. Typ. at Min.□ Tolerance Cutout Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color Note:Removal of contact is not necessary when using keying plug. Loose Piece Part No. 640629-1 (Flush) Used with keyed headers On Carrier Strip Part No. 641623-1 (Flush) (10 per strip) Long Nose Flush .125 [3.18] .500 [12.70]□ Ref. 2.525 [64.14] Ref. .300 [7.62]□ Ref. Panel Mount End Caps Part No. 641440-1 Part No. 641533-1 (2-position only) Material (RoHS Compliant) UL94V-2 rated, nylon, black Notes: 1. Both left-hand and right-hand end caps are attached by a con- necting tab. This tab must be broken off prior to installing on connector. 2. For best results attach panel mount end caps to the MTA-156 (IDC) connectors shown on pages 36 thru 39. While not preferred, panel mount end caps can be attached to MTA-156 (IDC) posted connector on page 45. .440 [11.18] .520 [13.2] .410 [10.41] .550 [13.97] Two-Position Only 641533-1 3- thru 24-Position 641440-1 See Note 1 .453 [11.5] A .010 [.254] Max. R. Typ. at Min. Tolerance Cutout No. of Dim. Pos. A 3 .736 18.69 4 .892 22.66 6 1.204 30.58 9 1.672 42.47 12 2.140 54.36 15 2.608 66.24 24 4.012 101.9 Recommended Panel Cutout .564 [14.33] .520□ [13.2] .440 [11.18] Part No. 640630-1 (Long Nose) Used with staked post MTA-156 Connector Accessories(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] MTA-156 Posted Connector/Connector Mateability Guide Posted Connectors Connectors

640426 YYYYYYYYYY

640427 YYYYYYYYYY

640428 YYYYYYYYYY

640429 YYYYYYYYYY

640430 YYYYYYYYYY

640431 NNNNNNNNNN

640432 NNNNNNNNNN

640433 NNNNNNNNNN

640434 NNNNNNNNNN

640435 NNNNNNNNNN

640472 YYYYYYYYYY

640473 YYYYYYYYYY

640474 YYYYYYYYYY

640475 YYYYYYYYYY

640476 YYYYYYYYYY

640477 NNNNNNNNNN

640478 NNNNNNNNNN

640479 NNNNNNNNNN

640480 NNNNNNNNNN

640481 NNNNNNNNNN

640595 YYYYYYYYYY

640599 YYYYYYYYYY

640600 YYYYYYYYYY

640601 YYYYYYYYYY

640602 YYYYYYYYYY

640604 NNNNNNNNNN

640605 NNNNNNNNNN

640606 NNNNNNNNNN

640607 NNNNNNNNNN

640608 NNNNNNNNNN

641301 YYYYYYYYYY

641302 YYYYYYYYYY

641303 YYYYYYYYYY

641304 YYYYYYYYYY

641305 YYYYYYYYYY

641306 NNNNNNNNNN

641307 NNNNNNNNNN

641308 NNNNNNNNNN

641309 NNNNNNNNNN

641310 NNNNNNNNNN

643817 NNNNNNNNNN

643818 NNNNNNNNNN

643819 NNNNNNNNNN

643820 NNNNNNNNNN

643821 NNNNNNNNNN

644082 NNNNNNNNNN

644461 NNNNNNNNNN

644462 NNNNNNNNNN

644463 NNNNNNNNNN

644464 NNNNNNNNNN

644465 NNNNNNNNNN

644466 NNNNNNNNNN

644467 NNNNNNNNNN

644468 NNNNNNNNNN

644469 NNNNNNNNNN

644470 NNNNNNNNNN

644471 NNNNNNNNNN

644472 NNNNNNNNNN

644501 NNNNNNNNNN

644502 NNNNNNNNNN

644566 NNNNNNNNNN

644567 NNNNNNNNNN

644569 NNNNNNNNNN

644570 NNNNNNNNNN

644572 NNNNNNNNNN

644783 NNNNNNNNNN

644791 NNNNNNNNNN

644860 YYYYYYYYYY

644878 NNNNNNNNNN

641435641436641437641438641439641522641523641524641525641526 Matrix for Tin Plated Part Numbers This matrix has been pre- pared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted con- nector and connector com- bination. Where a “Y” is indicated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 posted connector and connector combination. Where a “Y” is indi- cated the combination is a valid mating pair. Where an “N” is indicated the combination is not acceptable for mating. Posted Connectors Posted Connectors 644807644809644812644814

641217 YYYY

641218 YYYY

641219 YYYY

641220 YYYY

641221 YYYY

641222 NNNN

641223 NNNN

641224 NNNN

641225 NNNN

641226 NNNN

641227 YYYY

641228 YYYY

641229 YYYY

641230 YYYY

641231 YYYY

641232 NNNN

641233 NNNN

641234 NNNN

641235 NNNN

641236 NNNN

644460 NNNN

644662 NNNN

644663 NNNN

644687 NNNN

644718 NNNN

644720 NNNN

Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers

641148 YYYY

641149 YYYY

641150 YYYY

641151 YYYY

641152 YYYY

641153 NNNN

641154 NNNN

641155 NNNN

641156 NNNN

641157 NNNN

641168 YYYY

641169 YYYY

641170 YYYY

641171 YYYY

641172 YYYY

641173 NNNN

641174 NNNN

641175 NNNN

641176 NNNN

641177 NNNN

644284 NNNN

647478 NNNN

647479 NNNN

647496 NNNN

MTA-156 Posted Connector/Connector Mateability Guide(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Closed End Feed-Thru .840 [21.34] .126 [3.20] .100 [2.54] .045 [1.14] Sq. 9 1.560 1.408 -939.62 35.76 12 2.028 1.876 1- -251.51 47.65 15 2.496 2.344 1- -563.40 59.54 24 3.900 3.748 2- -499.06 95.20 No. of Dim. Prefix/ Circuits AB Suffix 1 2 3 4 A Dim. .045 [1.14] Sq. .370 [9.4] .105 [2.67] .355 [9.02] .487 [12.37] Ref. 1.010 [25.65] B Dim. .156 [3.96] [ ] ± .010 ± 0.25 A Dim. .045 [1.14] Sq. .370□ [9.4] .105□ [2.67] .385 [9.78] .487 [12.37]□ Ref. 1.010□ [25.65] B Dim. p .156 [3.96] [ ] ± .010 ± 0.25 Performance Data Voltage Rating— 600 VAC Current Rating— 7 amp max. Low-Level Resistance— 7 m/H9024max. initial Dielectric Withstanding Voltage— 1500 VAC/1 min. Insulation Resistance— 5000 M/H9024min. initial Operating Temperature— -55/H11034C to/H11001105/H11034C Wire Size Part AWG mm 2 Numbers 18 0.8-0.9 3-641425-1 20 0.5-0.6 3-641426-1 22 0.3-0.4 3-641427-1 24 0.2 3-641428-1 26 0.12-0.15 3-641429-1 Technical Documents Product Specification 108-1065 MTA-156 Posted Connector Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Replacement IDC Contacts Material and Finish Contacts— Copper alloy, post tin plated over nickel Base Part Numbers Connector Type Closed End Connector1 Feed-Thru Connector1 & Wire Size Part Nos. RoHS Equiv. Part Nos. RoHS Equiv. Standard UL 94V-2, Tin Plated 18 AWG 641435 32, 33, 34, 36, 39, 42, 45, 54 641522 32, 33, 34, 36, 39, 42, 45, 540.8-0.9 mm2 20 AWG 641436 32, 33, 34, 36, 39, 42, 45, 54 641523 32, 33, 34, 36, 39, 42, 45, 540.5-0.6 mm2 22 AWG 641437 32, 33, 34, 36, 39, 42, 45, 54 641524 32, 33, 34, 36, 39, 42, 45, 540.3-0.4 mm2 24 AWG 641438 32, 33, 34, 36, 39, 42, 45, 54 641525 32, 33, 34, 36, 39, 42, 45, 540.2 mm2 26 AWG 641439 32, 33, 34, 36, 39, 42, 45, 54 641526 32, 33, 34, 36, 39, 42, 45, 540.12-0.15 mm2 Standard UL 94V-2, .000030 [0.00076] Gold Plated 18 AWG 644807 32, 33, 34, 36, 39, 42, 45, 54 644812 32, 33, 34, 36, 39, 42, 45, 540.8-0.9 mm2 20 AWG — 2 —— 2 —0.5-0.6 mm2 22 AWG 644809 32, 33, 34, 36, 39, 42, 45, 54 644814 32, 33, 34, 36, 39, 42, 45, 540.3-0.4 mm2 24 AWG — 2 —— 2 —0.2 mm2 26 AWG — 2 —— 2 —0.12-0.15 mm2 Standard UL 94V-2, .000015 [0.00038] Gold Plated 18 AWG 647476 32, 33, 34, 36, 39, 42, 45, 54 647481 32, 33, 34, 36, 39, 42, 45, 540.8-0.9 mm2 22 AWG 643995 32, 33, 34, 36, 39, 42, 45, 54 647497 32, 33, 34, 36, 39, 42, 45, 540.3-0.4 mm2 1 MTA-156 Posted Connectors (Closed End and Feed-Thru)will Only matewith MTA-156 connectors with locking ramp and without polarizing tabs. Theywill NOT mate with MTA-156 Quad Connectors. 2 Parts can be made available upon request. Minimums may apply. No. of Dim. Circuits AB Suffix 2 .468 .316 -211.89 8.03 3 .624 .472 -315.85 11.99 4 .780 .628 -419.81 15.95 6 1.092 .940 -627.74 23.88 Material and Finish Housing— UL 94V-2 rated, nylon, see chart for color Contacts— Copper alloy, post tin or .000030 [.00076] gold plated over nickel Notes: 1. Mating half visuals - pages 36 thru 39. 2. Strain relief & dust covers - pages 40 & 41. 3. Approved wire listing - page 70. Connector Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are deter- mined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end connector for

18 AWG wire would be:

4-— -2 The correct ordering number is 4-641435-2 See page 15 for an explanation of RoHS lead free equivalents. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Color Coding by Wire Size for UL 94V-2 Connectors

18 AWG —Orange

MTA-156 IDC Posted Connectors (Wire-to-Wire)—Closed End, Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 640383 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-640383-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-640383–2 thru 24 5-640383-4 See page 15 for an explanation of RoHS lead free equivalents. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. .250 [6.35] A .045 [1.14] .156 [3.96] Typ..078 [1.98]□ Typ. .450□ [11.43] .125□ [3.18] Solder tail□ Length (See Chart) .156 [3.96] Edge of Board.140 [3.56] Min. .125 [3.18] Post No. 1 Ref. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Base Part Numbers Square Posts Round Posts Solder tail Solder tail Solder tail Solder tail Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 640383 2–24 644749 2–24 640384 2–24 644750 2–24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641202 32–54 644756 32–54 641203 32–54 644757 32–54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641113 32–54 644763 32–54 641114 32–54 644764 32–54 PC Board Hole Diameters Square Round Post Post PC Board Hole Diameters Square Round Post Post Note:Consult Product Drawing for details on placing headers onto PC boards. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-156 Flat Headers—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39, 55, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641204 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641204-0 The part numbers inbold face are the RoHS equivalent ver- sion. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-641204–2 thru 24 5-641204-4 See page 15 for an explanation of RoHS lead free equivalents. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. .125 [3.18] A A .045 [1.14] Sq. .156 [3.96] Typ. .078 [1.98] Typ. .250 [6.35] .156 [3.96] .080/.070 [2.03/1.78] Solder tail Length (See Chart) .390 [9.91] Edge of Board X Post No. 1 .125 [3.18] .100□ [2.54] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Recommended Mounting Hole Pattern for .063 [1.60] Thk. PC Board for Retentive Leg Header MTA Connector. when mated with MTA Connector. X = .140 [3.56] Min. when mated with SL-156 Wire-to-Board Connector. Note:Consult Product Drawing for details on placing headers onto PC boards. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Square Posts Retentive Leg .125 [3.18] Solder tail .175 [4.45] Solder tail Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 647646 2–12 640385 2–24 644751 2–24 Standard UL94V-0, .000030 [0.00076] Gold Plated —— 641204 32–54 644758 32–54 Standard UL94V-0, .000015 [0.00038] Gold Plated —— 641115 32–54 644765 32–54 .390 ± .015 [9.91 ± 0.38] .125 [3.18] 16° Edge of Board .156 [3.96] Y Typ. Ø .063 ± .002 [1.60 ± 0.05] Typ. MTA-156 Flat Headers—Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36- 3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a lock- ing ramp. See pages 36 thru 39, 55, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts and a .125 [3.18] solder tail length would be: Base number 641208 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641208-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641208–2 3-641208–2 thru 24 2-641208-4 5-641208-4 See page 15 for an explanation of RoHS lead free equivalents. .156 [3.96] .125 [3.18] .450□ [11.43] Solder tail□ Length (See Chart) .300 [7.62] A .156 [3.96] .045 [1.14] .180 [4.57] .078 [1.98] Post No. 1 .175 [4.45] Min. Edge of Board Y .425□ [10.8] Ref. Typ. Typ. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board position tin plated and 2–24 position gold plated headers. Y = .073 [1.85] 9-24 position tin plated headers. PC Board Hole Diameters Square Round Post Post Note:Consult Product Drawing for details on placing headers onto PC boards. Note:All RoHS equivalent part numbers may not be available upon catalog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) and tube loaded product are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Square Posts Round Posts Leg Solder tail Solder tail Solder tail Solder tail Header RoHS Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 1744017 2-12 640445 2–24 644752 2–24 640388 2–24 644753 2–24 Standard UL94V-0, .000030 [0.00076] Gold Plated —— 641208 32–54 644759 32–54 641209 32–54 644760 32–54 Standard UL94V-0, .000015 [0.00038] Gold Plated —— 641119 32–54 644766 32–54 641120 32–54 644767 32–54 .068 [1.7] .400 [10.16] 16° ± 3° Retentive Leg MTA-156 Friction Lock Headers—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated, .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying pur- poses. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. .125 [3.18] solder tail lengths are for .062 [1.57] thick printed circuit boards and .175 [4.45] solder tail lengths are for .093-.125 [2.36-3.18] thick printed circuit boards. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. When using Front Bend Headers — for mating half visuals use connectors with a locking ramp for polarization/ retention purposes. When using Rear Bend Headers — for mating half visuals use connectors with- out a locking ramp. For polariza- tion purposes only see pages 36 thru 39, 55, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are determined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts, front bend, and a .125 [3.18] solder tail length would be: Base number 641210 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-641210-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 641210–2 3-641210–2 thru 24 2-641210-4 5-641210-4 See page 15 for an explanation of RoHS lead free equivalents. .125 [3.18] .450 [11.43] .212 [5.38] .425 [10.8] .156 [3.96] Y.045 [1.14] Sq. .180 [4.57] A .300 [7.62] .078 [1.98] Typ. Typ. .156 [3.96] .080/.070 [2.03/1.78] Edge of Board Post No. 1 X Solder tail Length (See Chart) .425□ [10.8] .157□ [3.99] Y Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board Front Bend Max., when mated with MTA Connector. Max., when mated with SL-156 Connector. Rear Bend Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. position tin plated and 2–24 position gold plated headers. Y = .073 [1.85] 9-24 position tin plated headers. Note:Consult Product Drawing for details on placing headers onto PC boards. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Square Posts Front Bend Rear Bend Solder tail Solder tail Solder tail Solder tail Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 640389 2–24 644754 2–24 640387 2–24 644755 2–24 Standard UL94V-0, .000030 [0.00076] Gold Plated 641210 32–54 644761 32–54 641207 32–54 644762 32–54 Standard UL94V-0, .000015 [0.00038] Gold Plated 641121 32–54 644768 32–54 641118 32–54 644769 32–54 MTA-156 Friction Lock Headers—Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .210 [5.33] A .125 [3.18] .156 [3.96] .076 [1.93] .045 [1.14] .425□□ [10.80] .100 [2.54] .125□□ [3.18] .450 [11.43] .545 [13.84] .073 [1.85] .156 [3.96] .066/.062 [1.68/1.57] Edge of BoardDia. .167 [4.24] .225 [5.72] Min. .078 [1.98] 90° Ref.□ Typ. Retention Tabs 4 Plc. Post No. 1 Polarized Retention Peg Typ. Peg Hole Polarized Retention Peg Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying pur- poses. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a lock- ing ramp. See pages 36 thru 39, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with square posts with pegs would be: Base number 644615 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-644615-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644615–2 thru 18 4-644615-8 See page 15 for an explanation of RoHS lead free equivalents. PC Board Hole Diameters Square Round Post Post Note:Consult Product Drawing for details on placing headers onto PC boards. Base Part Numbers Square Posts Round Posts Without Pegs With Pegs Without Pegs With Pegs Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 644611 32–48 644615 32–48 644612 32–48 644616 32–48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644627 32–48 644631 32–48 644628 32–48 644632 32–48 Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. MTA-156 Polarized Lock Headers—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Polarized Retention Peg Material and Finish Housing— UL94V-0 rated, polyester, white Posts— Copper alloy, tin plated or .000030 [0.00076] gold over nickel Notes: 1. Post(s) can be omitted for keying purposes. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Peg holes are not required in PC Boards when headers without pegs are used. 3. One peg only on a 2 position header, other position sizes have two pegs. 4. Headers with .00015 [0.00038] gold plated post are available upon request. Minimums may apply. 5. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use only connectors with a locking ramp for polarization/retention purposes, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a lock- ing ramp. See pages 36 thru 39, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with front bend and with pegs would be: Base number 644617 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-644617-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-644617–2 thru 18 4-644617-8 See page 15 for an explanation of RoHS lead free equivalents. Recommended Mounting Hole Pattern for .062 [1.57] Thk. PC Board .125 [3.18] .156 [3.96] .076 [1.93] Typ. .045 [1.14] .210 [5.33] Typ. Ref. .450 [11.43] .545 [13.84] .156 [3.96] Edge of Board Dia. .239 [6.07] Reg. Hole .066/.062□ [1.68/1.57] .078 [1.98] .069/.065□ [1.75/1.65] 90° Ref. Typ. Retention Tabs□ 4 Plc. Post No. 1 A .100 [2.54] .425 [10.80] Front Bend Rear Bend .205 [5.21] Typ. .073 [1.85] Typ. .125 [3.18] .200□□ [5.08]□ Typ. .125 [3.18] x Typ. Sq. Front Bend Max., when mated with MTA Connector. X = .350 [8.89] Min. when mated with SL-156 Connector. Rear Bend Max., when mated with MTA Connector. X = .500 [12.7] Min., when mated with SL-156 Connector. Note:Consult Product Drawing for details on placing headers onto PC boards. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Base Part Numbers Square Posts Front Bend Rear Bend Without Pegs With Pegs Without Pegs Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 644613 32–48 644617 32–48 644614 32–48 Standard UL94V-0, .000030 [0.00076] Gold Plated 644629 32–48 644633 32–48 644630 32–48 MTA-156 Polarized Lock Headers—Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, nylon, black Posts— Copper alloy, tin plated, .000015 [0.00038] gold over nickel Temperature— Maximum Temperature Rating: 280°C Notes: 1. Post(s) can be omitted for keying pur- poses. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin-lead on the solder tail. 3. Headers with straight and right-angle square posts are available upon request. Minimums may apply. 4. To determine header overall length (Dim. A), multiply .156 x the number of posts. Example: .156 x 10 posts equals 1.560 inches [39.62 mm]. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, use connectors with a locking ramp for polarization/retention pur- poses, see pages 36 thru 39, 55, 60 and 62. For polarizing purposes only use connectors without a lock- ing ramp. See pages 36 thru 39, 60 and 62. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with round tin plated posts: Base number 647648 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647648-0 The part numbers inbold faceare the RoHS equivalent version. Example: No. of Lead Free Pos. RoHS Prefix/Suffix 2 3-647648–2 12 4-647648-2 See page 15 for an explanation of RoHS lead free equivalents. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Base Part Numbers Round Post Header RoHS Part Nos. Equiv. Standard UL94V-0, Tin Plated 647648 32–42 Standard UL94V-0, .000015 [0.00038] Gold Plated 647649 32–42 For use with Infrared Reflow Process .650±.010 [16.51± 0.25] Solder Paste Area .057±.003 [1.45± 0.08] Pretinned Plated Thru Hole Typ. .100 [2.54] Pretinned Land (Both Sides) Typ. .008 [0.20] Min. Thick Solder Paste in Area Shown .120Typ.[3.05] .156Typ.[3.96] .070Typ.[1.78] Position No. 1 .120Typ.[3.05] Note:Consult Product Drawing for details on placing headers onto PC boards. Note: Select load headers (omitted pin headers) are available upon request. Please contact product engineer or product manager for details. Ø .045 ± .001 [1.14 ± 0.03] .076 ± .003 [1.93 ± 0.08] 2 Plcs. .210 [5.33] .450 [11.43].125 [3.18] Mating End Solder tail Post No. 1 A Ref. .156 [3.96] Typ. .425 [10.80] .335 [8.51] .700 ± .010 [1 7.78 ±0.25 ] .125 ± .010 [3.18 ±0.25 ] Ref. Ref. Typ. + .005 – .010 +0.13 –0.25 .073 [1.85 ] .545 ± .010 [13.84 ±0.25 ] Typ. MTA-156 Friction Lock High Temperature Headers—Straight MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Material and Finish Housing— UL94V-0 rated, polyester, black Posts— Copper alloy, tin plated; or .000030 [0.00076] or .000015 [0.00038] gold over nickel Notes: 1. Post(s) can be omitted for keying pur- poses. Specify the desired post(s) to be omitted using the figure to identify Post No. 1. 2. Gold headers are duplex plated, gold on mating end of post and tin on the solder tail. 3. Peg holes are not required in PC boards when headers without pegs are used. 4. One peg only on a 2 position header, other position sizes have two pegs. 5. Right-angle front and rear bend headers with retention pegs can be made avail- able upon request. Minimums may apply. For mateability options, see matrix on pages 34, 35, 54 and 58. For mating half visuals, see pages 36 thru 39 and 55. Header Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of posts available for the described headers. Prefixes and suffixes are deter- mined by the number of post positions in the header. For example, the complete part number for a 10-position header with straight, square posts and with pegs would be: Base number 647127 plus prefix-and-suffix 4-— -0 The correct ordering number is 4-647127-0 No. of Dim. RoHS Pos. A Prefix/ Suffix 2 .406 2--210.31 3 .562 2--314.27 4 .718 2--418.24 5 .874 2--522.20 6 1.030 2--626.16 7 1.186 2--730.12 8 1.342 2--834.09 9 1.498 2--938.05 10 1.654 3--042.01 11 1.810 3--145.97 12 1.966 3--249.94 Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Straight Post (.045 [1.14] Square or Round) Right-Angle (.045 [1.14] Square) A .455 [11.56] Polarized Retention Peg .125 [3.18] .045 [1.14] Post No. 1 .156 [3.96] .550 [13.97] .525 [13.34] .300 [7.62] .125 [3.18] .100 [2.54] .167 [4.24] .210 [5.33] .066/062 [1.68/1.58] Dia. .156 [3.96] .078 [1.98] .167 [4.24] .245 [6.22] Edge of Board Min. .066/062 [1.68/1.58] Dia. .156 [3.96] .078 [1.98] .239□ [6.07] .350/.700 [8.89/17.78] .069/.065 [1.75/1.65] Edge of Board Dia. Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Straight Post Header Recommended Mounting Hole Pattern for .062 [1.57] Thick PC Board Using a Right-Angle Header Front Bend Rear Bend Post No. 1 .156□ [3.96] Typ. .045 [1.14] .525 [13.34] Ref. .300 [7.62] Ref. .455 [11.56] .210 [5.33] .205 [5.21] .125 [3.18] Post No. 1 .156□ [3.96] Typ. .045 [1.14] .525 [13.34] Ref. .300 [7.62] Ref. .455 [11.56] .210□ [5.33] .205 [5.21 ] ± .002 ± 0.05 .125 [3.18 ] ± .010 ± 0.25 PC Board Hole Diameters Square Post Round Post Base Part Numbers Straight Square Posts Straight Round Posts Without Pegs With Pegs Without Pegs With Pegs Header RoHS Header RoHS Header RoHS Header RoHS Standard UL94V-0, Tin Plated 647123 22–32 647127 22–32 647124 22–32 647128 22–32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647131 22–32 647135 22–32 647132 22–32 647136 22–32 Standard UL94V-0, .000015 [0.00038] Gold Plated 647139 22–32 647143 22–32 647140 22–32 647144 22–32 Square Posts Right-Angle Posts, Front Bend Right-Angle Posts, Rear Bend Without Pegs Without Pegs Header RoHS Header RoHS Part Nos. Equiv. Part Nos. Equiv. Standard UL94V-0, Tin Plated 647125 22–32 647126 22–32 Standard UL94V-0, .000030 [0.00076] Gold Plated 647133 22–32 647134 22–32 Standard UL94V-0, .000015 [0.00038] Gold Plated 647141 22–32 647142 22–32 Note:Select load headers (omitted pin headers) are available upon request. Please contact product engineer or prod- uct manager for details. Note:Consult Product Drawing for details on placing headers onto PC boards. MTA-156 Shrouded Headers—Straight and Right-Angle MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] 644329 644370 644371 644375 644376 644377 644381 644382 644383 644387 644388 644389 640389 Y Y Y Y Y Y Y Y Y Y Y Y 640385 Y Y Y Y Y Y Y Y Y Y Y Y 640383 Y Y Y Y Y Y Y Y Y Y Y Y 640445 Y Y Y Y Y Y Y Y Y Y Y Y 644611 Y Y Y Y Y Y Y Y Y Y Y Y 644613 Y Y Y Y Y Y Y Y Y Y Y Y Connectors Headers 644615 Y Y Y Y Y Y Y Y Y Y Y Y 644617 Y Y Y Y Y Y Y Y Y Y Y Y 644749 Y Y Y Y Y Y Y Y Y Y Y Y 644751 Y Y Y Y Y Y Y Y Y Y Y Y 644752 Y Y Y Y Y Y Y Y Y Y Y Y 644754 Y Y Y Y Y Y Y Y Y Y Y Y 647123 Y Y Y Y Y Y Y Y Y Y Y Y 647125 Y Y Y Y Y Y Y Y Y Y Y Y 647126 Y Y Y Y Y Y Y Y Y Y Y Y 647127 Y Y Y Y Y Y Y Y Y Y Y Y Product Facts I Provides four points of contact I Greater current carrying capability than Standard MTA-156 Connectors I Connector styles include both closed end and feed- thru with locking ramp, with and without polarizing tabs in 2 through 12 positions I Available for wire ranges of 18 – 22 AWG [0.9– 0.3 mm ] I Contacts are lubricated for fretting corrosion protection I Complies with Tyco Electronics Quality Specification 102-6, “Preparation of Design Objectives” I Uses existing MTA applica- tion tooling for termination I Quad connectors preloaded with contacts I All contacts are slotted for insulation displacement (IDC) termination technique I Connectors and headers are end-to-end stackable I AWG size is “frosted” on the side of the connector I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR 7189 I Satisfies the VDE require- ments according to VDE 110, Insulation Group B, 250 vac for air and creep- age paths R R The MTA-156 Quad Con- nector provides a connec- tion with four points of contact. The UL94V-0 rated connector with multi-point contacts provides greater current carrying capability than the Standard MTA-156 Connector. These connec- tors comply with Tyco Electronics Quality Specification 102-6* and satisfy the VDE requirements according to VDE 110. The connectors are avail- able for wire ranges of 18 – 22 AWG [0.9– 0.3 mm and in a variety of styles including closed end and feed-thru with locking ramp, with and without polarizing tabs. Only one wire to be termin- ated into an IDC contact slot. *The 102-6 Quality Specification is the new procedure for “Preparation of Design Objectives”. Its purpose is to provide a means for verifying the maximum current carrying capacity of the device. Note:Refer to pages 70 through 74 for approved wire listings. The MTA-156 Quad Connectors only mate with standard MTA- 156 square post headers and use existing MTA application tooling for termination. Performance Data Voltage Rating— 600 vac Current Rating— 12.5 amp max. on a single circuit. For Multiple Circuit Loading— refer to Product Specification for current rating chart. Low-Level Resistance— 3.0 m/H9024max. initial Dielectric Withstanding Voltage— 1500 vac/1 min. Insulation Resistance— 5000 M/H9024min. initial Operating Temperature— -55/H11034C to/H11001105/H11034C Technical Documents Product Specifications 108-1219 MTA-156 Quad Connector System Application Specifications 114-1048 MTA-156 Quad Connector This matrix has been prepared to assist you, our customer, in defining the correct mating halves for the MTA-156 header and connector combination. Where a “Y” is indi- cated the combination is a valid mating pair. MTA-156 IDC Quad Connectors MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Closed End with Locking Ramp without Polarizing Tabs with Polarizing Tabs with Polarizing Tabs .156 [3.96] Typ. A .097 [2.46] .100 [2.54] .308 [7.82] .725 [18.42] .245 [6.22].100 [2.54] .325 [8.26] .355 [9.02] .280 [7.11] .180 [4.57] .230 [5.84] .090 [2.29] without Polarizing Tabs .725 [18.42] .245 [6.22] .100 [2.54] .325 [8.26] .385 [9.78] .230 [5.84] .180 [4.57] .090 [2.29] .280 [7.11] Feed-Thru with Locking Ramp .156 [3.96] Typ. A .097 [2.46] AWG .100 [2.54] .308 [7.82] Base Part Numbers Closed End with Locking Ramp Feed-Thru with Locking Ramp Without Tabs With Tabs Without Tabs With Tabs Connector Type & Wire Size Connector RoHS Connector RoHS Connector RoHS Connector RoHS Standard UL94V-0, Tin Plated 18 AWG 644329 32–42 644381 32–42 644375 32–42 644387 32–420.8-0.9 mm2 20 AWG 644370 32–42 644382 32–42 644376 32–42 644388 32–420.5-0.6 mm2 22 AWG 644371 32–42 644383 32–42 644377 32–42 644389 32–420.3-0.4 mm2 Material and Finish Housing— UL94V-0 rated, nylon, black Contacts— High conductivity copper alloy, post tin plated For mateability options, see matrix on page 54. For strain relief and dust covers, see pages 40 and 41. For mating half visuals, see pages 46 thru 48 and 50, 52 and 53, (49 and 51 Front Bend Headers only).Mates with tin-platedsquare posts only. Refer to pages 70 thru 74 for approved wire listing. Note:To determine connector overall length (Dim. A), multiply .156 x the number of circuits. Example: .156 x 10 circuits equals 1.560 inches [39.62 mm]. Note:Tyco Electronics does not rec- ommend terminating an MTA contact more than one time. Use replace- ment contacts when required for field repairs or wire gage changes. Wire Size Part AWG mm 2 Numbers 18 0.8-0.9 3-644508-1 20 0.5-0.6 3-644509-1 22 0.3-0.4 3-644510-1 .562 [14.27] .116□ [2.95] AWG AWG AWG Connector Ordering Information The “Base Part Numbers” Chart above shows the base part number and number of circuits available for the described connectors. Prefixes and suffixes are deter- mined by the number of circuit positions in the connector. For example, the complete part number for a 10-position closed end connector with locking ramp and without polarizing tabs for 18 AWG wire would be: Base number 644329 plus prefix-and-suffix 1- — -0 The correct ordering number is 1-644329-0 The set of numbers inbold face are the RoHS equivalent ver- sion of the standard product. Example: No. of Standard Lead Free Pos. Prefix/Suffix RoHS Prefix/Suffix 2 644329–2 3-644329–2 thru 12 1-644329-2 4-644329-2 See page 15 for an explanation of RoHS lead free equivalents. Note:All RoHS equivalent part num- bers may not be available upon cat- alog release. If the number you need is not available, please contact Product Engineering to expedite your request. Replacement IDC Contacts Material and Finish Contacts— High conductivity copper alloy post tin plated MTA-156 IDC Quad Connectors—Closed End and Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] .170 [4.32] .156 [3.96] Typ. A B C .161 [4.09] .094 [2.39] .380 [9.65] .075 [1.91] .677 [17.2] .440□ [11.18] Ref. .300 [7.62] .125 [3.18] Dia. .312 [7.92 ] ± .005 ± 0.13 .015 [0.38 ] ± .005 ± 0.13 .100 [2.54] Min. .100 [2.54] Min. Circuitry side .090 [2.29] Min. .156 [3.96] Typ. x 45° Cham. Both sides D [ ] ± .005 ± 0.13 Recommended PC Board Layout for .062 [1.57] Thk. PC Board B E .145□ [3.68] .375□ [9.53] .138 [3.51].075 [1.91] .130 [3.3] Typ. Recommended Panel Cutout Material and Finish Housing— UL94V-0 rated, polyester, see chart for color Contacts— Phosphor bronze, post tin plated Note:Refer to pages 70 thru 74 for approved wire listings. Color Coding by Wire Size for UL94V-0 Connectors The “Base Part Numbers” Chart at right shows the base part number and num- ber of circuits available for the described connectors. Prefixes and suffixes are determined by the number of circuit positions in the connector. For example, the complete part number for a 12-position closed end con- nector without mounting ears for 18 AWG wire would be: Base number 640859 plus prefix-and-suffix 1- — -2 The correct ordering num- ber is 1-640859-2 See page 15 for an explanation of RoHS lead free equivalents. Performance Data Voltage Rating— 600 vac Current Rating— 5 amp max. Low-Level Resistance— 7 m/H9024max. initial Dielectric Withstanding Voltage— 1250 vac/1 min. Insulation Resistance— 5000 M/H9024min. initial Operating Temperature— /H1100255/H11034C to/H11001105/H11034C Technical Documents Product Specification 108-1058 MTA-156 Card Edge Connectors Application Specification 114-1020 MTA-156 Connectors, Posted Connectors and Card Edge Connectors Base Part Numbers Closed End Feed-Thru Connector Type Without With Without With & Wire Size Mounting Ears Mounting Ears Mounting Ears Mounting Ears No. of No. of No. of No. of Connector Circuits/ Connector Circuits/ Connector Circuits/ Connector Circuits/ Part Nos. RoHS Part Nos. RoHS Part Nos. RoHS Part Nos. RoHS Equiv. Equiv. Equiv. Equiv. Standard UL94V-0, Tin Plated

18 AWG 640859 15,18, 20-24640864 15,18, 20-24641283 15,18, 20-24641288 15,18, 20-24

45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54

20 AWG 640860 15,18, 20-24640865 15,18, 20-24641284 15,18, 20-24641289 15,18, 20-24

45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54

22 AWG 640861 15,18, 20-24640866 15,18, 20-24641285 15,18, 20-24641290 15,18, 20-24

45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54

24 AWG 640862 15,18, 20-24640867 15,18, 20-24641286 15,18, 20-24641291 15,18, 20-24

0.2 mm2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54

26 AWG 640863 15,18, 20-24640868 15,18, 20-24641287 15,18, 20-24641292 15,18, 20-24

0.12-0.15 mm2 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 33, 36, 39, 42, 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 45, 48, 50-54 No. of Dimensions Prefix/ Circuits ABCDE Suffix MTA-156 IDC Card Edge Connectors—Closed End and Feed-Thru MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Dust Cover Material (RoHS Compliant) UL94V-0 rated, polyester, white Cover is for both Closed End and Feed-Thru connectors Cover Ordering Information The “Base Part Numbers” Chart at right shows the base part number and number of circuits available for the described cover. Prefixes and suffixes are determined by the number of circuit positions in the cover. For example, the complete part number for a 12-position dust cover would be: Base number 641106 plus prefix-and-suffix 1- — -2 The correct ordering number is 1-641106-2 .130 [3.3] .609 [15.47] .126 [3.2] .100 [2.54] Locking Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, white Part Number641101-1 A .130 [3.3] .530 [13.46] Retention Dimple No. of Dim. Prefix/ Circuits A Suffix 3 .504 -312.80 6 .972 -624.69 9 1.440 -936.58 12 1.908 1- -248.46 15 2.376 1- -560.35 18 2.844 1- -872.24 20 3.156 2- -080.16 21 3.312 2- -184.12 22 3.468 2- -288.09 23 3.624 2- -392.05 24 3.780 2- -496.01 .195 [4.95] .075 [1.91] .074□ [1.88] 1.150□ [29.21] Note:Contact can remain during locking plug installation. Material (RoHS Compliant) UL94V-2 rated, nylon, white Part Number641293-1 .900 [22.86] .170□ [4.32] .100□ [2.54] Note:Contact must be removed to install locking plug. Base Part Number Cover Part No. No. of Circuits 641106 3, 6, 9, 12, 15, 18, 20-24 Replacement IDC Contacts Material and Finish Phosphor bronze; post tin plated Part Numbers 3-640994-1 (24 AWG [0.2 mm 2]) 3-640995-1 (26 AWG [0.12-0.15 mm 2]) MTA-156 IDC Card Edge Accessories MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] The AMP SL-156 connec- tors shown on the following pages are designed to mate with .045 [1.14] square or round post headers or staked posts on .156 [3.96] centers. The wire-to-board connector is a two-piece connector system with the wire crimped to the contact, then inserted into the hous- ing. This product mates with the MTA-156 flat, polarized and friction lock header, or staked posts (notMTA-156 shrouded headers). Performance Data Voltage Rating— 250 vac Current Rating— 10 amp max. at 250 vac Low-Level Resistance— 3.0 m/H9024max. initial Dielectric Withstanding Voltage— 2000 vac/1 min. Insulation Resistance— 1000 M/H9024min. initial Operating Temperature— /H1100255/H11034C to/H11001105/H11034C The Large Insulation Diameter (LID) Contacts and Housings are for use in applications where wire insulation is up to .112 [2.84] in diameter. Technical Documents Product Specification 108-1049, 108-1049-1, 108-1049-2 Application Specification 114-1021 Product Facts I Rugged wire-to-board interconnection to mate with .045 square or round post headers or staked posts on .156 centers I Standard Connectors accept wire range of 18–24 AWG [0.9–0.2 mm ] and LID Connectors accept wire range of 18–24 AWG [0.9–0.2 mm ] and a lim- ited 16 AWG [1.29–1.42 mm ] (2550–2800 CMA) I Two-piece interconnection system (connector/header) I Housing made of flame retardant nylon I Available in 1- through 24-position connector configurations I Connectors are end-to-end stackable I Wire-to-board system offers polarization with friction lock for positive mating I Meets the material requirements of Table 23.1 of UL1410 Standard for High-Voltage Television Receivers and Video Productions I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR7189 R R Y 647230 N Y NYY YYY YYY 647227647228647229647260 Y Y N 644769 647262 N Y Y 647261 Y Y Y Y Y Y 644751 Y YYY N Y YYY Y Y YYY N 644752644753644754644755 YYYY YYYY YYYY YN Y Y N Y Y Y 644756644757644758644759644760644761644762 Y 641113

647401 Y YYY Y

647400 Y YYY Y

647402 Y YYY Y

Y Y Y Y Y Y 641114641115 N Y N 641118641119641120641121644763644764644765644766644767644768 Headers 640383

647401 Y YYN Y

647402 Y YYN Y

Y Y Y 640384640385640387640388640389640445644611644612644613644614644615644616644617 Y Y Y Y Y Y N Y N Y Y Y Y Y Y Y Y Y 644750 Y Y Y Headers 644749 Y 644322 Y Y Y Y Y N 647401 647400 647402 YY YY YY Y YYY Y Y YNY Y YYY Y YYY 640250 640251 770849 Housings 640250 640251 Standard Standard Standard 770849 Housings 640250 640251 770849 Housings 641202641203641204641207641208641209641210644627644628644629644630644631644632 Y Y Y Y Y Y Y Y Y N Y N Y Y Y Y Y Y Headers 644633 Y Y Y Y These matrixes represent only the housing and header combinations. You also need to consider the plating on the contacts and headers. Gold contacts with gold headers and tin contacts with tin headers. Matrix for Tin Plated Part Numbers Matrix for .000030 [0.00076] Gold Plated Part Numbers Matrix for .000015 [0.00038] Gold Plated Part Numbers .156 [3.96] Centerline SL-156 Crimp Contacts and Housings MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] For housings, see pages 60 and 61. Contacts Material and Finish .012 [0.3] bright tin plated brass or phosphor bronze; .012 [0.3] pre-tin brass; or .012 [0.3] brass or phosphor bronze with .000030 [0.00076] gold over nickel (see chart) I All tin-plated contacts are post lubricated to resist fretting corrosion I Maximum insulation diameter is .105 [2.67] I Wire range is 18-30 AWG [0.9-0.06 mm2] Application Note Part No. 640252 has a higher mating and un- mating force than Part No. 350980 and is recom- mended to be used only in housings with 1 through 12 positions. Part No. 350980 can be used in any size housing but is recommended to be used in housings with 13 through 24 positions. Part No. 770476 is recom- mended for use in any size housing. Its mating force is similar to Part No. 350980 while unmating force is similar to 640252. .115 [2.92] .121/.115 [3.07/2.92] .145/.140 [3.68/3.56] .230 [5.84] .180□ [4.57] .131 ±.004□ [3.33 ±0.10] A High Force (6.5 Amp Max. Current Rating) B Low Force (6.5 Amp Max. Current Rating) C Hooded (Dual Wipe) (10 Amp. Max. Current Rating) Wire Size Contact Material and Finish Part Numbers AWG mm 2 Strip Loose Piece 24–30 A brass, pre-tin plated 641550-1 —0.2-0.06 brass, bright tin plated 640252-1 640706-1 A brass, pre-tin plated 640252-2 640706-2 brass,RoHS Compliant 3-640252-1 3-640706-1 brass, bright tin plated 350980-1 640707-1 18–24 brass, pre-tin plated 350980-2 — 0.9-0.2 B brass, gold plated 350980-3 770258-1 brass,RoHS Compliant 3-350980-1 3-640707-1 phosphor bronze, bright tin plated 770476-1 770522-1 C phosphor bronze, gold plated 770476-2 770522-2 phosphor bronze,RoHS Compliant 3-770476-1 3-770522-1 Keying Plugs Material (RoHS Compliant) UL94V-2 rated, nylon, natural color .300 [7.62] .225 [5.72] .300 [7.62] Keying Plug Part No. 640254-1 Keying Pin Part No. 640255-1 Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts— PRO-CRIMPER II Hand Tool Part No. 58614-1 (408-4228) [For field service use only] For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts— AMP-O-LECTRIC Model “G” Termination Machine* Applicator 680211-3 (Request Catalog 65828) AMP-O-LECTRIC Model “K” Termination Machine* Applicator 466468-2 AMP-O-MATIC Stripper-Crimper Machine* SCA 466947-1 or 567828-1 (with CQM) (Request Catalog 65004) AMPOMATOR CLS IV+ Lead Making Machine* Applicator 466468-1 (Request Catalog 82659) *Requires applicators. For part numbers, call Technical Support. SL-156 Crimp Contacts and Keying Plugs MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Housings Material (RoHS Compliant) UL94V-0 rated, nylon, white Notes: 1. Accepts either .045 [1.14] square or round posts. Housings mate with flat and friction lock headers, or staked posts on .156 [3.96] centers. 2. Housings without ramp, with polarizing tab, available upon request. Minimums may apply. 3. Recommend contact: Part No. 640252 for 1 thru 12 positions; Part No. 350980 for 13 thru 24 positions; Part No. 770476 for 1 thru 24 positions. (A) With Locking Ramp/With Polarizing Tabs (B) With Locking Ramp/Without Polarizing Tabs (C) Without Locking Ramp/Without PolarizingTabs .660 [16.76] .100 [2.54] .019 [0.48] .250 [6.35] 12 223 4 .156 [3.96] Typ. .076 [1.93] Typ. A .097 [2.46] .037 [0.93] Ref. 12 223 4 .660 [16.76] .250 [6.35] .100 [2.54] .156 [3.96]□ Typ. .076 [1.93] Typ. A .037□ [0.93] .097 [2.46] Ref. 12 223 4 .660 [16.76] .250 [6.35] .156 [3.96]□ Typ. .076 [1.93] A Typ. .060 [1.52] For contacts, see page 59. For mateability options, see matrix on page 58. For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) For mating half visuals, for connectors without lock- ing ramp, see pages 46 thru 52. No. of Housing Description Part Numbers*Positions* 2–24 A With Locking Ramp and Polarizing Tabs 770849 1–24 B With Locking Ramp and without Polarizing Tabs 640250 C Without Locking Ramp or Polarizing Tabs 640251 *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Note:Housings not for use with LID Contacts. Shown on page 62. Note:Dim. A = 0.156/H11003(No. of Positions – 1)/H110010.152 SL-156 Housings—Wire-to-Board MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Housings Material (RoHS Compliant) UL94V-2 rated, nylon, white .078 [1.98] .105 [2.67] PC Board □ Posts.156 [3.96] 1234 789 1 0 1 2 3 4 7 8 9 10 [4.14 .163 + .005 – .000 + 0.13 – 0.00 .052 [1.32 ] ± .002 ± 0.05 B .105 [2.67] Latch Cutout .015 [0.38] 4 Plc. Max.R. A .078 [1.98] Typ. .156 [3.96] Typ. .063 [1.60 ] ± .003 ± 0.08 .063 [1.60 ] ± .003 ± 0.08 .050 [1.27 ] ± .007 ± 0.18 .075 [1.91] .250□ [6.35] .125 [3.18] .660 [16.76] No. of Dimensions Latch Location Part Pos. AB Centered Between Pos. Number 2 .312 1 and 2 1-770894-217.92 — 3 .468 1 and 2 1-770894-3111.89 — 4 .624 2 and 3 1-770894-4115.85 — 5 .780 2 and 3 1-770894-5119.81 — 6 .936 3 and 4 1-770894-6123.77 — 7 1.092 3 and 4 1-770894-7127.74 — 8 1.248 4 and 5 1-770894-8131.70 — 9 1.404 1.092 1 and 2 & 8 and 9 1-770894-9135.66 27.74 10 1.560 1.248 1 and 2 & 9 and 10 1-770894-0139.62 31.70 Note:Not for use with LID Contacts. Shown on page 62. Recommended PC Board Cutout for .062 [1.57] Thick PC Board Mates with .045 square or round staked posts only. For contacts, see page 59 SL-156 Housings With Through Board Latch MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] .054 [1.37] .095 [2.41] Typ. .156 [3.96]Typ. .054 [1.37] Typ. .0365 [.927] Ref. .100 [2.54] .250 [6.35] .660 [16.76] A Contacts Material and Finish .012 [0.3] bright tin plated phosphor bronze; .012 [0.3] phosphor bronze with .000030 [0.00076] gold over nickel (see chart) I All tin-plated contacts are post lubricated to resist fretting corrosion I Maximum insulation diameter is .112 [2.85] I Wire range is 18-24 AWG [0.9-0.2 mm2] and a limited 16 AWG [1.29-1.42 mm2] (2550-2800 CMA) Product Specifications 108-1049-1 and 108-1049-2 Application Specification 114-1021 Application Tooling Extraction Tool Part No. 90471-1 Loose Piece Contacts— PRO-CRIMPER II Hand Tool Part No. 91368-1 [18-24 AWG] Part No. 91369-1 [16 AWG] (For field service use only.) For CERTI-CRIMP hand tool, contact Technical Support. Strip Contacts— AMP-O-LECTRIC Model “G” Termination Machine* Applicator 1385048-3 [18-24 AWG] Applicator 1385219-3 [16 AWG] AMP-O-LECTRIC Model “K” Termination Machine* Applicator 1385048-2 [18-24 AWG] Applicator 1385219-2 [16 AWG] Housings Material (RoHS Compliant) UL 94V-0 rated, nylon, white Notes: 1. Accepts Standard and LID contacts. 2. Larger opening in housings eases contact insertion when using wires that have large insulation diameters (.100-.112 [2.54-2.84]). 3. Housings are not End-to-End stackable. For mateability options, see matrix on page 58. For mating half visuals, for connectors with locking ramp, see pages 46, 47, 48, 50 and 52, (49 and 51 Front Bend Headers only.) For mating half visuals, for connectors without locking ramp, see pages 46 thru 52. Part Numbers* No. of Description HousingsPositions* with Larger Openings for Oversize Wire 1-24 Without Locking Ramp 647400or Polarizing Tabs With Locking Ramp and 647401 without Polarizing Tabs (shown above) 2–24 With Locking Ramp and 647402Polarizing Tabs *Base Part Number Prefixes and Suffixes indicate number of contact positions, e.g. 2 Position = 0-xxxxxx-2 and 12 Position = 1-xxxxxx-2. Wire Part Numbers Size Material Plating For LID* Wire Strip Loose Piece Phosphor Tin 647406-1 647409-1 18-24 AWG Bronze Gold 647406-2 647409-2 RoHS Compliant 3-647406-1 3-647409-1

16 AWG Phosphor

(2550-2800 CMA only) Bronze Gold 647466-2 647485-2 RoHS Compliant 3-647466-1 3-647485-1 *Large Insulation Diameter (.100-.112 [2.54-2.84]) Notes:1. For information on application tooling, call Technical Support. 2. Cannotbe used with Standard SL-156 Housings, must be used with LID Housings only. .160 [4.06] .112 [2.84] .108 [2.74] .524 [13.30] .143 Hooded (Dual Wipe) (10 Amp Max. Current Rating) *For additional part numbers and information contact Technical Support. Note:Dim. A = 0.156/H11003(No. of Positions – 1)/H110010.19 SL-156 Housings and Contacts for Large Insulation Diameter (LID) Wire MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.312 [7.92] centerline I Wire-to-board connectors comprised of plug housings, receptacle contacts for discrete wire, and mating post headers I Hooded contact designed to accept wire with insulation diameters up to .118 [3.00] I Positive locking feature built into header back wall I Locking mechanism on connector housing maximizes retention I Number of positions: 1 to 11 for .156 [3.96] centerline; 2 to 12 for .200 [5.08] centerline; and 2 to 5 for .312 [7.92] centerline I Straight, through-hole headers I Positive latch design for easier mating and unmating I Polarization tabs help prevent post misalignment and mismating I Low-profile mating height of .641 [16.3] for 2 to 11 positions I Straight headers are end-to- end stackable to conserve PCB space I Header packaging: bulk pack and tube loaded I Plug housings and post headers intermateable with JST VH connectors I Directive 2002/95/EC (RoHS Compliant I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476 I Certified by Canadian Standards Association, File No. LR 7189

Applications

I Household appliances, garage door openers, power supplies, power connections, or other areas requiring additional connector retention R R AMP Economy Power (EP) Connectors are designed for secondary power circuit applications. They consist of wire-to-pc board plug housings (for receptacle contacts) and mating post headers. Three contact centerline spacings are available: .156 [3.96], .200 During mating, the positive locking lever on the outside of the plug housing engages the mating header housing to provide for greater retention. This helps maintain reliable connections, when other non-locking type connec- tors could vibrate apart. This same locking lever must be depressed to unmate the connectors. The locking mechanism is also located high enough to help avoid interference with pc board clear plastic coating (potting), which is a common treatment for many home appliances. Headers with .156 [3.96] centerline are offered in 2 through 11 positions; 2 through 12 positions for .200 [5.08] centerline; and .312 [7.92] centerline are available in 2 through 5 positions. Both versions are provided in bulk pack or in tubes for automatic machines. The slim, straight, post headers are stackable end- to-end for greater flexibility when designing pc board configurations. The mating height of a low-profile plug and vertical header is .642 [16.3]; even the 1-position high-profile style measures only .732 [18.6] above the pc board. Compact dimensions like these are well suited for most applications in con- fined spaces. Performance Characteristics Voltage Rating— 250 VAC Current Rating— 7.5 amp max. (2 to 11 pos.), 8 amp max. (1 pos.) Low Level Overall Resistance– Initial — 10 mΩmax. Final — 20 mΩ max. Dielectric Withstanding Voltage— 1.5 kV AC, 1 min. Insulation Resistance— Initial — 1000 MΩmin. Final — 500 MΩ min. Durability— 50 mating and unmating cycles Operating Temperature— -13˚F to Wire Size Range — 18-22 AWG [0.89-0.30 mm Insulation Diameter— .118 [3.00] max. Technical Documents Product Specification 108-5609 Application Specification 114-5253 Instruction Sheet 411-5899 AMP Economy Power (EP) Wire-to-Board Connector System MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Contacts and Plug Housings, Low-Profile Crimp, Snap-in Receptacle Contacts Material and Finish (RoHS Compliant) See chart. Related Product Data Plug Housings— Pages 64, 67 and 69 Plug Housings, Low-Profile Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Related Product Data Contacts— see above Mating Post Headers— Pages 65 and 66 .083 [2.11] .055 [1.40] .08 [2.1 .362 [9.19] .382 [9.70] .154 [3.91] .039 [1.00] .524 [13.31] .284 [7.21] .224 [5.69] .156 [3.96] .150 [3.81] (3-11 Pos.) .295 [7.49] .039 [1.00] .059 [1.50] A (2 Pos.) .142 [3.61] Section X-X Circuit No. 1 Number of Dimension Part Positions A Number 2 .310[ 7.86] 1-1123722-2 3 .465[11.82] 1-1123722-3 4. 621 [15.78] 1-1123722-4 5. 777 [19.74] 1-1123722-5 6 .933[23.70] 1-1123722-6 7 1.089 [27.66] 1-1123722-7 8 1.245 [31.62] 1-1123722-8 9 1.401[35.58] 1-1123722-9 10 1.557[39.54] 1-1123722-0 11 1.713[43.50] 1-1123722-1 12 1.878 [47.70] 1-647690-2* * Consult Product Drawing for dimensional detail. Applicator Part Number Wire Size Wire Material Part AMPOMATOR AMP-O-LECTRIC Range Insulation and Number CLS IV+ Terminator AWG mm 2 Diameter Finish Strip Loose Lead Maker Model K Model GForm Piece Base Part No. Part No. Part No.356500 1-471273-3 354500-1 Phos. Brz.,1123721-1 1318912-1* * For 18–20 AWG, use Straight Action Hand Tool (SAHT) Part Number 91579-1. AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Straight and Right-Angle Low-Profile Post Headers .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housings— Page 64 Number of Dimension Part Number Positions A Bulk Pack Tube Loaded (Pcs. per Tube) Bulk Pack with Pegs 2 .310[ 7.86] 1-1123723-2 1-1318300-2 (61) 1744057-2 3 .465[11.82] 1-1123723-3 1-1318300-3 (40) 1744057-3 4. 621 [15.78] 1-1123723-4 1-1318300-4 (30) 1744057-4 5. 777 [19.74] 1-1123723-5 1-1318300-5 (24) 1744057-5 6 .933[23.70] 1-1123723-6 1-1318300-6 (20) 1744057-6 7 1.089 [27.66] 1-1123723-7 1-1318300-7 (17) 1744057-7 8 1.245 [31.62] 1-1123723-8 1-1318300-8 (15) 1744057-8 9 1.401[35.58] 1-1123723-9 1-1318300-9 (13) 1744057-9 10 1.557[39.54] 1-1123723-0 1-1318300-0 (12) 1-1744057-0 11 1.713[43.50] 1-1123723-1 1-1318300-1 (11) 1-1744057-1 12 1.871 [47.52] 1-647689-2* — 1-1744057-2 * Consult Product Drawing for dimensional detail. Post No. 1 .028 [0.7] .244 [6.2] .118 [3.0] .146 [3.7] .303 [7.7] .077 [1.95] .045 [1.14] Sq. Post .077 [1.95] .156 [3.96] Centerline .268 [6.8] .335 [8.5] A Straight .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housings— Page 64 Number of Dimension Part NumberPositions A 2 .312 [ 7.92] 647676-2 3 .468[11.88] 647676-3 4. 624 [15.84] 647676-4 5. 780 [19.80] 647676-5 6 .935[23.76] 647676-6 7 1.091[27.72] 647676-7 8 1.247 [31.68] 647676-8 9 1.403[35.64] 647676-9 10 1.559[39.60] 1-647676-0 11 1.715 [43.56] 1-647676-1 12 1.871 [47.52] 1-647676-2 A .339 [8.60] .272 [6.90] .020 [0.50] .126 [3.20] .142 [3.60] .323 [8.20] .339 [8.60] .370 [9.40].126 ± .004 [3.20 ± 0.10] .079 ± .004 [2.00 ± 0.10] .045 [1.14] Ref. .156 [3.96] .045 [1.14] Post No. 1 Sq. Post Right-Angle Edge of Board .350 [8.89] Ø .065/.069 [1.65/1.75] Typ..156 [3.96] Recommended PC Board Layout AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 Edge of Board .190 [4.82] .125 [3.18] Typ. .156 [3.96] .069/.065 [1.75/1.65] .066/.062 [1.68/1.57] Typ. .078 [1.98] Recommended Mounting Hole Pattern for .063 [1.6] Thick PC Board

.156 [3.96] Straight and Right-Angle Low-Profile Post Headers, High Temperature .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housings— Page 64 .156 [3.96] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, high temperature, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housings— Page 64 Straight Right-Angle Number of Dimension Part NumberPositions A 2 .312 [ 7.92] 1744055-2 3 .468[11.88] 1744055-3 4. 624 [15.84] 1744055-4 5 .780[19.80] 1744055-5 6 .935[23.76] 1744055-6 7 1.091[27.72] 1744055-7 8 1.247 [31.68] 1744055-8 9 1.403[35.64] 1744055-9 10 1.559[39.60] 1-1744055-0 11 1.715 [43.56] 1-1744055-1 Number of Dimension Part NumberPositions A 2 .312 [ 7.92] 1744056-2 3 .468[11.88] 1744056-3 4. 624 [15.84] 1744056-4 5. 780 [19.80] 1744056-5 6 .935[23.76] 1744056-6 7 1.091[27.72] 1744056-7 8 1.247 [31.68] 1744056-8 9 1.403[35.64] 1744056-9 10 1.559[39.60] 1-1744056-0 11 1.715 [43.56] 1-1744056-1 12 1.871 [47.52] 1-1744056-2 Maximum Temperature Rating: 280°C A .339 [8.60] Edge of Board .575 [14.60] .156 [3.96] Typ. .045 [1.14] Sq. Post Typ. .059 [1.51] .323 [8.21] .156 [3.96] .225 [5.72] Ø .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40].145 [3.69] Post No. 1 A .339 [8.60] Edge of Board .617 [15.68] .059 [1.51] .323 [8.21] .142 [3.60] .350 [8.89] Ø .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] Post No. 1 .156 [3.96] Typ. Typ..156 [3.96] .045 [1.14] Sq. Post Recommended PC Board Layout Recommended PC Board Layout AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.200 [5.08] Plug Housings and Post Headers Plug Housings .200 [5.08] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Related Product Data Contacts— Page 64 Mating Post Headers— See below A .406 [10.30] .263 [8.88] .051 [1.30] .200 [5.08] .051 [1.30] .053 [1.35] Typ. Typ.Circuit No. 1 Number of Dimension Part Positions A Number 2 .353[ 8.98] 1744036-2 3 .553[14.06] 1744036-3 4 .753[19.14] 1744036-4 5. 953 [24.22] 1744036-5 6 1.153 [29.30] 1744036-6 7 1.353[34.38] 1744036-7 8 1.553[39.46] 1744036-8 9 1.753[44.54] 1744036-9 10 1.953[49.62] 1-1744036-0 11 2.153 [54.70] 1-1744036-1 12 2.353[59.78] 1-1744036-2 Post Headers .200 [5.08] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post—Tin-plated brass Related Product Data Mating Plug Housings— See above Number of Dimension Part Number Positions A Straight Right-Angle 2 .302[ 7.68] 1744037-2 1744048-2 3 .502[12.76] 1744037-3 1744048-3 4 .702[17.84] 1744037-4 1744048-4 5 .902[22.92] 1744037-5 1744048-5 6 1.102 [28.00] 1744037-6 1744048-6 7 1.302[33.08] 1744037-7 1744048-7 8 1.502 [38.16] 1744037-8 1744048-8 9 1.702[43.24] 1744037-9 1744048-9 10 1.902[48.32] 1-1744037-0 1-1744048-0 11 2.102 [53.40] 1-1744037-1 1-1744048-1 12 2.302[58.48] 1-1744037-2 1-1744048-2 A .339 [8.60] .575 [14.60] .200 [5.08] Typ. Typ. .323 [8.21] .200 [5.08] Ø .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] .059 [1.51] .146 [3.70] Post No. 1 Recommended PC Board Layout Sq. Post.045 [1.14] A .339 [8.60] Edge of Board .059 [1.51] .323 [8.21] .142 [3.60] .669 [17.00] Ø .065/.069 [1.65/1.75] .190 [4.82] .303 [7.70] .370 [9.40] Post No. 1 Ref. Max. 2 Plcs..080 [2.02]Sq. Post.045 [1.14] .200 [5.08] Typ. Recommended PC Board Layout AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.312 [7.92] Straight Post Headers, Low-Profile .312 [7.92] Centerline Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housings— Page 64 Number of Dimension Part Number Positions A Bulk Pack Tube Loaded (Pcs. per Tube) 2 .465[11.82] 1-1123724-2 1-1318301-2 (40) 3. 777 [19.74] 1-1123724-3 1-1318301-3 (24) 4 1.089[27.66] 1-1123724-4 1-1318301-4 (17) 5 1.401[35.58] 1-1123724-5 1-1318301-5 (13) A .077 [1.95] .028 [0.7] .312 [7.92] Centerline .077 [1.95] .045 Sq. Post [1.14] .244 [6.2] .118 [3.0] .146 [3.7] .303 [7.7] .312 [7.92] Centerline Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] .065 +.004/-0 Dia. Drilled Hole [1.65 +0.1/-0] .335 [8.5] .268 [6.8] Post No. 1 Mating Height (Low-Profile) Mating Height .642 [16.3] AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Post Header, High-Profile

1 Position Plug Housing

(RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Related Product Data Contacts— Page 64 Mating Post Header— See below

1 Position Post Header,

1-1123824-1 (Bulk Pack) 1-1318831-1 (Tube Loaded, 55 pcs. per Tube) Material and Finish (RoHS Compliant) Housing — UL 94V-0 rated nylon, natural color Note: Alternate colors available upon request. Minimums may apply. Please contact product engineer or product manager for details. Post— Tin-plated brass Related Product Data Mating Plug Housing— See above .571 [14.5] .224 [5.7] .039 [1.0] Section X-X Recommended PC Board Layout Acceptable Board Thickness .062 [1.57] Soldering Side Component Mounting Side Section X-X .528 [13.4] .327 Max. [8.3] Urethane Coating Area .337 [8.55] .146 [3.7] .118 [3.0] .079-.032±.004 [2-0.8±0.1] .079-.051+.004/-0 [2-1.3+0.1/-0] .079-.142±.004 [2-3.6±0.1] .128 [3.25] .189 [4.8] .045 [1.14] Sq. Post PC Board Eyelet .118 [3.0] .347 [8.8] .252 [6.4] .154 [3.9] Max. Dia. .197 [5.0] Max. Dia. .063 +.004/-0 Dia. Punched Hole [1.60 +0.1/-0] .065 +.004/-0 Dia. Drilled Hole [1.65 +0.1/-0] Mating Height (High-Profile) Mating Height .732 [18.6] Potting Height .327 [8.3] Max. Retention Lock AMP Economy Power (EP) Wire-to-Board Connector System(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Proper wire selection is critical to the success of a wire-to- board application. The chart identifies wires that have been evaluated and approved by the product engineering section. If you plan to use a wire not on the approved list, please submit a sample 12" length of wire to Tyco Electronics for evaluation. AWG Metric Equivalents 18 —0.8 –0.9 mm 2 20 —0.5 –0.6 mm 2 22 —0.3 –0.4 mm 2 24 —0.2 mm 2 26 —0.12 –0.15 mm 2 28 —0.08 –0.09 mm 2 Product Specifications 108-1050 — MTA-100 Connectors 108-1050- 1— MTA-100 Posted Connectors 108-1051 — MTA-156 Connectors 108-1219 — MTA-156 Quad Connector System 108-106 5— MTA-156 Posted Connectors 108-1058 — MTA-156 Card Edge Connectors Application Specifications 114-1019 — MTA-100 Connectors 114-1020 — MTA-156 Connectors 114-1031 — MTA-100 Ribbon Cable Connector Assembly 114-1032 — MTA-156 Ribbon Cable Connector Assembly 114-1048 — MTA-156 Quad Connector MTA Connectors Approved Wire Listing MTA-100 Connectors Wall Approved Wire AWG UL 1007 PVC Insulation .015″[0.381] 22, 24, 26, 28 UL 1061 Semi-Rigid PVC Insulation .009″[0.229] 22, 24, 26, 28 UL 1095 Semi-Rigid PVC Insulation .012″[0.305] 24 UL 1371 TEFLON Insulation — TFE .006″[0.152] 22, 26 UL 2464 PVC .013″[0.330] 24 MIL-W-16878, Type B-PVC Insulation .010″[0.254] 22 MTA-156 Connectors UL 1007 PVC Insulation .015″[0.381] 18, 20, 22, 24 UL 1061 Semi-Rigid PVC Insulation .009″[0.229] 18, 20, 22, 24 UL 1213 TEFLON Insulation — T.F .E. 010″[0.254] 18, 22, 24 UL 1316 PVC/Nylon Wall .015″[0.381] 18, 22 UL 1569 PVC .015″[0.381] 18 Note:When selecting approved wire styles noted on this list, the MTA Application Specifications guidelines must be followed. Also, due to wire variations in insulation wall thickness, hardness and wire stranding we would recom- mend evaluating the wire selected before final application approval. TEFLON is a trademark of E.I. DuPont de Nemours and Company. MTA-100 Ribbon Cable Preparation MTA-156 Ribbon Cable Preparation † The dimensions shown represent the recommended minimum and maximum for notches; the actual dimension will depend on your application requirements. Notes: 1. Cable shall be notched, as indicated in the individual ribbon cable connector assembly drawing, according to the requirements specified in these figures. Conductor shall not be exposed after notching, nor shall individual wire stands be cut or nicked. 2. U.L. Style #2651 ribbon cable is approved for use with MTA-100 and MTA-156 connectors per Application Specification 114-1031 and 114-1032. Ribbon Cable Cable Edge-to-End Alignment (Ends of the cable shall be prepared as indicated in this figure) .400-.800† [10.16-20.32] Feed-Thru NotchDead-End Notch .036-.046 Standard (.046-.052 Allowable for □ 26-28 AWG Wire Only) .280-.450† [7.112-11.43] .036-.046 Standard (.046-.052 Allowable for 26-28 AWG Wire Only) .500-1.000†□ [12.70-25.40] Feed-Thru NotchFlush-Mount Notch .400-.600† [10.16-15.24] .062-.080 [1.57-2.03] .062-.080□ [1.57-2.03] .064 [1.63] Typ. (Max.) After Notching .050 [1.27] Dia. (Max.) For Mass Terminating .100 [2.54] (Typ.) Insulation Conductor Web .094 [2.39] Typ. (Max.)□ After Notching .070 [1.78] Dia. (Max.)□ For Mass Terminating .156 [3.96] (Typ.) Insulation Conductor Web Ribbon Cable End View – A – .010 A Per Inch of Cable Width Notes: 1. For MTA Cable Assemblies Contact US Engineering Cable Assembly Group. 2. For IDC Cable, see pages 71 thru 74. MTA Wire Selection MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

I Compatible with a variety of Insulation Displacement Connectors I Available on .025 [0.63], centerline I Color code edge mark on conductor #1 I Gray flame retardant flexible PVC insulation I Insulation rated for temperature of -20°C to +105°C I Recognized under the Component Program of Underwriters Laboratories Inc., File No. E53793 R Tyco Electronics Corporation has an expanding array of MADISON CABLE planar PVC insulated product designed for compatibility with a variety of Insulation Displacement Connectors. AMP IDC terminations offer a quick, reliable, cost-effec- tive cabling system which can be automated. The .100 [2.54] centerline cable is available in 28 to

22 AWG, either as tinned or

as overcoated tinned wire, in 2 to 28 conductors. The .156 [3.96] centerline is available in 22 AWG and

18 AWG, either as tinned

or overcoated tinned, in 2 to 24 conductors. IDC Ribbon Cable is produced to tighter stan- dards than usually required for high yield insulation displacement terminations. The extra precision offers uncomplicated operation in fully automatic stripping, notching and termination equipment. IDC Ribbon Cable .050 [1.27] Centerline, IDC Ribbon Cable Product Specifications Voltage Rating— 30 VAC Component Recognized by UL to US and Canadian Standards— AWM Style 2651 Sizes—

26 AWG, 7/34 Tinned copper, PVC

insulation (9 – 64 conductors), 500-ft reels (Base AMP Part Number 57034)

28 AWG, 7/36 Tinned copper, PVC

insulation (9 – 64 conductors), 100-ft reels (Base AMP Part Number 57040) and 500-ft reels (Base AMP Part Number 971111)

30 AWG, Other conductor counts avail-

able on request. For ordering informa- tion, call Toll-Free:1-877-623-4766or visit:http://www.madisoncable.com/ fsproducts.htm IDC Ribbon Cable MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

No. of Dimensions Part Conductors AB C Number

28 AWG 7/32 Tinned Copper

26 AWG 7/34 Tinned Copper

26 AWG 7/34 Overcoated Tinned Copper

Other Conductor Counts Available on Request. Product Specifications Voltage Rating— 300 Volts UL Recognized — AWM Style 2651 CSA — Available on request Edge Mark .100 [2.54] Typ. Insulation — Gray Flame Retardant Flexible PVC .007[0.17] Minimum Insulation Thickness Temperature Rating — -20°C to +105°C Flammability — UL: VW1 .010[0.25] .050[1.27] Typ. B C A ContactMADISON CABLE (1-877-MADISON ), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable.

24 AWG 7/32 Overcoated Tinned Copper

22 AWG 7/30 Tinned Copper

No. of Dimensions Part Conductors A BC Number .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

.156 [3.96] Typ. Insulation — Gray Flame Retardant Flexible PVC .007[0.17] Minimum Insulation Thickness Temperature Rating — –20°C to +105°C Flammability — UL: VW1 .010 [0.25] .078[1.98] Typ. B A C Product Specifications Voltage Rating— 300 Volts UL Recognized — AWM Style 2651 CSA — Available on request No. of Dimensions Part Conductors AB C Number

18 AWG 7/26 Tinned Copper

Other Conductor Counts Available on Request. ContactMADISON CABLE (1-877-MADISON ), a Division of Tyco Electronics Corporation, for engineering questions or for order placement of this cable. IDC Ribbon Cable .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

In addition to bulk cable, the US Engineering Cable Assembly Group offers Prepared Cable for the .100 terline cables. This can be in the form of prenotched cable on reels or cut-to- length cable segments. Prenotched 250 foot reels of cable can be produced with notches at varying increments or repeating all along the cable. The maxi- mum width of these cables is 20 conductor for the .100 [2.54] centerline and 13 conductor for the .156 [3.96] centerline. Prepared Cable is also available with a Strip and Retain feature allowing the cable assembly to be sol- dered directly to the PC Board. This saves space and cost and reduces spare parts inventory. Strip and Retain on both ends is used in family board appli- cations to maintain the electrical connection when the PC Board is separated into smaller boards after soldering. Widths are limited to 20 conductors for the .100 [2.54] centerline and 13 conductors for the .156 [3.96] centerline. However, multiple cables can be placed side-by-side in a single connector. For other styles and configurations contact the product engi- neer or product manager. Prepared IDC Ribbon Cable MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Insulation will be contained within the confines of the insulation strain relief as indicated B Min. A Top of Contact Conductor Bare wires will not be visible beyond back of housing Centerline of Conductor Back of Housing Bare wires will not extend above top of contact Choose the appropriate MTA Connector from the MTA Catalog 82056. Select the proper wire style and AWG for the chosen MTA Connector (Refer to pages 70-74). Choose the MTA Termination Tooling (Refer to pages 76-79). Terminate the Wire-to-MTA Connector per Application Tooling Instruction Sheet. Inspect the MTA Wire Termination per Application Specification, especially the wire depth. See illustrations: 114-13072 — MTA-50 Connectors, 114-1019 — MTA-100 Connectors, 114-1020— MTA-156 Connectors, Posted Connector, Card Edge, 114-1048 — MTA-156 Quad Connectors, 114-1031 — MTA-100 Ribbon Cable Connector Assembly, and 114-1032 — MTA-156 Ribbon Cable Connector Assembly. Adjust the Termination Tooling (if needed) per Tooling Instruction Sheet (repeat the step above). Connector AB MTA-100 .069–.087 .040 [1.75-2.21] [1.02] MTA-156 .090–.113 .060 [2.29-2.87] [1.52] MTA Wire Termination Flowchart MTA Wire Termination Flowchart MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Manual Arbor Frame (with slide) Part Number 1583518-1* Upper Tooling Part Number 1583514-1* Fixture, Discrete Wire, Closed End Part Number 1583515-1 (28-26 AWG) Part Number 1583515-2 (30-28 AWG) Fixture, Discrete Wire, Feed-Thru Part Number 1583516-1 (28-26 AWG) Part Number 1583516-2 (30-28 AWG) Fixture, Ribbon Cable, Closed End or Feed-Thru Part Number 1583517-1 *Required, plus appropriate Fixture(s). One-At-A-Time Termination Tooling Part Numbers Note:Max. Insulation Outside Diameter Wire: .060 [1.52] for MTA-100 Connectors/.095 [2.41] for MTA-156 Connectors MTA-100 and MTA-156 Mass Termination Tooling Part Numbers Note:Max. Insulation Outside Diameter Wire: .050 [1.27] for MTA-100 Connectors/.070 [1.78] for MTA-156 Connectors Harness Board Holding Fixture Interchangeable HeadMTA Connector Interchangeable Head Used With and Tape Feed TrackAssembly Part Number Used With Part Number Applicator Tooling Part Number Used WithAssembly Assembly Closed End —— 58242-1 — 854175-1 & 312522-158242-3 58575-1 854200-1 (Base) Feed Thru 58644-1 (Discrete Wire)† 58074-1 (Man Hd Tl) 58243-1 — ——MTA-100 58644-2 (Notched Cable)† 58243-3 58575-1Connector Closed End —— 58635-1 58575-1 ——(Posted) Feed Thru —— 58636-1 58575-1 ——(Posted) Closed End —— 58244-1 — 854176-1 & 312522-158244-3 58576-1 854200-1 (Base) Feed Thru 58646-1 (Discrete Wire)†† 58074-1 (Man Hd Tl) 58245-1 — —— MTA-156 58646-2 (Notched Cable)†† 58245-3 58576-1 Connector Card Edge —— 59848-1 — ——59848-3 58576-1 Closed End —— 58009-1 — ——(Posted) 58009-2 58576-1 Feed Thru —— 58010-2 58576-1 ——(Posted) Manual Bench Closed End —— 58244-1 — Tool 58024-1 —— 58244-3 58576-1 and ToolingMTA-156 Assy 58040-1Quad 58245-1 — 58024-1 and Feed Thru —— Tooling Assy ——58245-3 58576-1 58040-1 †2- through 12-positions.††2- through 8-positions. Manual Bench Tool 58024-1 and Tooling Assembly 58039-1 Manual Bench Tool 58024-1 and Tooling Assembly 58040-1 Interchangeable Head and Interchangeable Head andInterchangeable Head Loose-Piece Feed Track Tape Feed Track T-Handle MTA Connector Manual Hand Tool 58074-1 Air Bench Mount Air Bench Mount Special MaintenanceAssembly Air Hand Tool 58075-1 Tool 58338-1 Tool 58338-1 Applicator ToolAir Bench Mount Tool 58338-1 Electric Bench Electric BenchElectric Bench Machine 931800-1 Machine 931800-1 Machine 931800-1 MTA-50 Closed End 1583503-1 —— — —Feed Thru Closed 58246-1 (Standard)*n 853546-1 & 853542-1 End 58246-2 (Ext Wear)* 933567-1 466728-1 59803-1 MTA-100 58246-3 (Ribbon Cable) (Base) Connector Feed Thru 58442-1 —— — 59803-1 Posted 58638-1 —— — 59803-1(Closed-End) Closed 58247-1 (Standard)** 853547-1 & 853542-1 End 58247-2 (Ext Wear) 933568-1 466727-1 59804-1 MTA-156 58247-3 (Ribbon Cable) (Base) Connector Feed Thru 58443-1 —— — 59804-1 Posted 58082-1 —— — 59804-1(Closed-End) MTA-156 Closed 58061-1 —— 567020-1 59839-1Card-Edge End MTA-156 Closed 58392-1 —— — 59804-1Quad End *Repair Kit 856600-1 **Repair Kit 856600-2 Notes: 1. A repair kit consists of a cam, a feed-slide sub-assembly and a locating pawl. Repair kits can be made available for other inter- changeable heads. Consult Tyco Electronics. 2. Standard modular heads 58246-1 and 58247-1 are recommended for low volume use. 3. Extended wear modular heads 58246-2 and 58247-2 are recommended for high volume use. 4. T -Handle Maintenance Tools are for maintenance (field) use only. They are not rec- ommended for production. 5. Some Manual Hand Tool Assemblies are available: a. Order 58579-1, comprised of Head 58246-1 with Manual Hand T ool 58074-1. b. Order 58580-1, comprised of Head 58247-1 with Manual Hand T ool 58074-1. c. Order 58639-1, comprised of Head 58638-1 with Manual Hand T ool 58074-1. MTA-50 Mass Termination Tooling Part Numbers MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

I No special setup required I Connectors are easily loaded into feed track I Connectors are fed using a simple spring-loaded pusher Interchangeable Head and Tape Feed Track I No special setup required I Tape-mounted connectors are transferred from prod- uct reel to feed track by simply pulling on the free end of the carrier tape I Connectors are fed using a simple spring-loaded pusher Special Applicator I Connectors are easily hand loaded into feed track I Automatically advances the connector after each termination I Cannot be cycled until the connector is properly positioned Manual Hand Tool with Interchangeable Head Air Bench Mount Tool with Interchangeable Head and Foot Switch Air Hand Tool with Interchangeable Head Electric Bench Machine with Interchangeable Head One-At-A-Time Termination Tooling (Typical Tooling Combinations) Air Bench Mount Tool with Interchangeable Head and Loose-Piece Feed Track Electric Bench Machine with Interchangeable Head and Tape Feed Track AMP-O-LECTRIC Bench Machine with Special Applicator Power Units Manual Hand Tool — Pistol Grip Handle Part No. 58074-1 I Easy to use I Ratchet control will not release the trigger until it is fully bottomed I Head may be rotated for user convenience Air Hand Tool — Pistol Grip Pneumatic Handle Part No. 58075-1 I Light weight I Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] I Head may be rotated for user convenience Air Bench Mount Tool — Bench Mount Power Assembly Part No. 58338-1 I May be mounted with interchangeable head pointed up or down I Operated by a foot switch I Operates at air pressure between 40 and 70 psi [2.76 and 4.83 bar] Electric Bench Machine — IDC Power Unit Part No. 931800-1 I All electric: 120 VAC,

60 Hz, 2 A

I Compact, portable and quiet I Operated by a foot switch T-Handle Maintenance Tool Interchangeable Heads and Applicators(Refer to page 76 for part numbers.) Application Tooling MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Applicator and Holding Fixture I Wires are laced into plastic combs for mass termination I Trims excess wire for closed-end terminations I Holding fixture may be mounted to a harness board Applicator and Tape Feed Track I Tape-mounted connectors are transferred from prod- uct reel to feed track by simply pulling on the free end of the carrier tape I Connectors are fed using a simple spring-loaded pusher I Feed stop easily adjusted for different connector sizes I Notch cable with up to 28 conductors for .100 centerline, and 24 conductors for .156 centerline I Pressure plate holds cable in position during notching I Scrap conveniently removed through a chute with a blast of air from a built-in air valve Mass Termination Tooling (Typical Tooling Combinations) Manual Bench Tool with Applicator and Holding Fixture Manual Bench Tool with Applicator and Tape Feed Track Air Bench MachineAir Harness Tool with Applicator Ribbon Cable Notcher Assembly 2700 lb Air Bench Machine with Ribbon Cable Notcher Assembly Power Units Manual Bench Tool — Arbor Frame Assembly Part No. 58024-1 I Applicator and holding fixture can be oriented for operator convenience for closed-end or feed-thru terminations I Ram height (insertion depth) is easily adjusted I May be bench mounted Air Harness Tools — Hand-Held Power Unit with Applicator Part No. 58575-1 (MTA-100) Part No. 58576-1 (MTA-156) I Applicator can be rotated 360° for orientation with holding fixture I Insertion depth is easily adjusted I Operates at air pressure between 75 and 95 psi [5.17 and 6.55 bar] Air Bench Machine — Pneumatic Unit Part No. 91112-2 I Operated by a foot switch I Operates at air pressure between 80 and 90 psi [5.52 and 6.21 bar] I Not recommended for notching cable with more than 14 conductors 2700 lb Air Bench Machine — Part No. 312522-1 I Operated by a foot switch I Capable of exerting 2,700 lb [12,000 N] of force at minimum 80 psi [5.52 bar] air pressure I May be bench mounted Applicators and Notcher Assemblies Ribbon Cable Notcher Assembly Part Number Wire Size Centerline Used WithAWG 854449-2 26-28 .100 Manual Bench Tool 2.54 58024-1 854449-4 22-28 .100 Air Bench Machine 2.54 91112-2 2700 lb Bench Machine .156 312522-1 854449-3 18-24 3.96 AMP-O-LECTRIC Bench Machine 1-471273-3 (with Conversion Kit 690675-2) Use Adapter 854468-1 when putting Notcher in the AMP-O-LECTRIC Machine. Use Adapter 854468-2 when putting Notcher in the 2700 lb Air Bench Machine. MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Hand Tools, Power Units & Accessories Manual Arbor Frame (MTA-50) 1583518-1 IS 408-8812 2700 lb Air Bench Machine 312522-1 CM 409-5843 Upper Tooling (MTA-50) 1583514-1 IS 408-8812 Terminator Assembly, "G" Term 354500-1 CM 409-5842 Manual Arbor Frame Assembly 58024-1 IS 408-6923 AMP-O-LECTRIC Bench Machine 1-471273-3 CM 409-5128 Ribbon Cable Applicator, .100 58039-1 IS 408-6685 Conversion Kit 690675-2 IS 408-8022 Ribbon Cable Applicator, .156 58040-1 IS 408-6701 Base Assembly 853542-1 IS 408-9636 Manual Hand Tool 58074-1 IS 408-6790 Base 854200-1 IS 408-9650 Air Bench Mount Tool 58338-1 IS 408-9393 Adapter (AMP-O-LECTRIC) 854468-1 IS 408-9687 Air Hand Tool (MTA-100) 58575-1 IS 408-4260 Adapter (2700 lb Machine) 854468-2 IS 408-9687 Air Harness Tool (MTA-156) 58576-1 IS 408-4260 Repair Kit 856600-1 IS 408-9745 T-Handle Maintenance Tool (MTA-100) 59803-1 IS 408-7907 Repair Kit 856600-2 IS 408-9745 T-Handle Maintenance Tool (MTA-156) 59804-1 IS 408-7907 Electric Bench Mount Tool 931800-1 CM 409-5746 Air Arbor Frame Assembly 91112-2 IS 408-7763 One-At-A-Time Termination Tooling Interchangeable Heads Interchangeable Head & Loose Piece Feed Track MTA-50 MTA-156 MTA-100 MTA-156 1583503-1 IS 408-8801 58247-1 IS 408-6930 933567-1 IS 408-9435 933568-1 IS 408-9466 MTA-100 58247-2 IS 408-9380 Interchangeable Heads & Tape Feed Track 58246-1 IS 408-6929 58247-3 IS 408-4146 MTA-100 MTA-156 58246-2 IS 408-9379 58443-1 IS 408-9607 853546-1 IS 408-9636 853547-1 IS 408-9637 58246-3 IS 408-4147 58061-1 IS 408-6794 Special Applicators58442-1 IS 408-9603 58082-1 IS 408-6795 MTA-100 MTA-15658638-1 IS 408-4358 58392-1 IS 408-9450 466728-1 AI 408-8054 466727-1 AI 408-8054 567020-1 AI 408-8069 Mass Termination Tooling Die Set Assembly MTA-50 MTA-100 MTA-156 MTA-100 1583515-1 IS 408-8812 58242-1 IS 408-7994 58009-1 IS 408-7995 854175-1 IS 408-9667 1583515-2 IS 408-8812 58242-3 IS 408-7994 58009-2 IS 408-7995 1583516-1 IS 408-8812 58243-1 IS 408-7994 58010-2 IS 408-7995 MTA-156 1583516-2 IS 408-8812 58635-1 IS 408-7994 58244-1 IS 408-7995 854176-1 IS 408-9650 1583517-1 IS 408-8812 58636-1 IS 408-7994 58244-3 IS 408-7995 58644-1 IS 408-4406 58245-1 IS 408-7995 58644-2 IS 408-4440 58245-3 IS 408-7995 59844-1 IS 408-7994 58646-1 IS 408-4405 59845-1 IS 408-7994 58646-2 IS 408-4439 59845-3 IS 408-7994 59848-1 IS 408-7995 59848-3 IS 408-7995 Technical Documents Typical Application Rates The following is a list of technical documents covering the installation, operation, adjustment, maintenance and repair of MTA application tooling. Instruction Sheets (IS)provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. Customer Manuals (CM) provide complete, detailed instructions on the installation, operation, adjustment, maintenance and repair of complex tools and application machines. Applicator Instructions (AI)are similar to instruction sheets (which cover products and tools), and provide instructions for installation, adjustment and maintenance of applicators used in auto- matic and semiautomatic machines. Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Discrete Wire Method Terminations Per Hour Manual Hand Tool 58074-1 with Interchangeable Head 58246-1 — Electric Bench Machine 931800-1 with Interchangeable Head 58246-1 900 Electric Bench Machine 931800-1 with Interchangeable Head and Loose-Piece Feed Track 933567-1 1,100 Electric Bench Machine 931800-1 with Interchangeable Head and Tape Feed Track 853546-1 and 853542-1 (Base) 1,250 Apply One 4-Position MTA-100 Feed-Thru Connector per Assembly, Discrete Wire Method Terminations Per Hour Manual Bench Tool 58024-1 with Applicator and Holding Fixture 650 For further information about tooling call Technical Support. Produce 6-in. [15 cm] Long Jumpers, One 4-Position MTA-100 Connector per End, Ribbon Cable* Method Terminations Per Hour 2700 lb Air Bench Machine 312522-1 with Applicator and Tape Feed Track 854175-1 and 854200-1 (Base) 7,500 * Procedure: Mass terminate 12-conductor ribbon cable with three connectors per end. After terminating, separate by tearing the 12-conductor assembly into three 4-conductor assemblies. Cable Notching Method Cable Ends Per Hour 2700 lb Air Bench Machine 312522-1 with Ribbon Cable Notcher Assembly 854449-2 and 854468-2 (Adapter) 1,000 Application Tooling MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Part No. Page 02WEY00007P 72 02WEY00008P 72 02WFY00006P 72 02WFY00007P 72 02WGY00001P 72 02WGY00008P 73 02WJY000001P 73 05WEY00004P 72 05WEY00007P 72 05WFY00006P 72 05WFY00007P 72 05WGY00006P 72 05WGY00008P 73 05WJY000010P 73 10WEY00007P 72 10WEY00012P 72 10WFY00006P 72 10WFY00007P 72 10WGY00002P 72 10WGY00008P 73 10WJY000010P 73 15WEY00002P 72 15WEY00007P 72 15WFY00006P 72 15WFY00007P 72 15WGY00006P 72 15WGY00008P 73 15WJY000010P 73 20WEY00007P 72 20WEY00008P 72 20WFY00006P 72 20WFY00007P 72 20WGY00006P 72 20WGY00008P 73 20WJY000010P 73 24WGY00008P 73 24WJY000010P 73 25WEY00007P 72 25WEY00008P 72 25WFY00006P 72 25WFY00007P 72 25WGY00006P 72 28WEY00007P 72 28WEY00008P 72 28WFY00006P 72 28WFY00007P 72 28WGY00006P 72 57034 71 57040 71 350980 59, 60 640250 60 640251 60 640252 59, 60 640383 46 640384 46 640385 47 640387 49 640388 48 640389 49 640426 37 640427 37 640428 37 640429 37 640430 37 640431 37 640432 37 640433 37 640434 37 640435 37 640440 15 640441 15 640442 15 640443 15 640445 48 640452 21 640453 21 640454 23 640455 23 640456 24 640457 24 640468 15 640469 15 640470 15 640471 15 640472 37 640473 37 640474 37 640475 37 640476 37 640477 37 640478 37 640479 37 640480 37 640481 37 640550 16 640551 40 640556 41 640557 41 640558 41 640559 41 640595 39 640599 39 640600 39 640601 39 640602 39 640604 39 640605 39 640606 39 640607 39 640608 39 640620 15 640621 15 640622 15 640623 15 640629 42 640630 42 640631 41 640632 41 640633 41 640634 41 640635 41 640636 17 640637 17 640638 17 640639 17 640642 16 640643 40 640706 59 640707 59 640708 17 640709 17 640859 56 640860 56 640861 56 640862 56 640863 56 640864 56 640865 56 640866 56 640867 56 640868 56 641101 57 641106 57 641113 46 641114 46 641115 47 641118 49 641119 48 641120 48 641121 49 641122 21 641123 21 641124 23 641125 23 641126 24 641127 24 641143 41 641144 41 641145 41 641146 41 641147 41 641148 37 641149 37 641150 37 641151 37 641152 37 641153 37 641154 37 641155 37 641156 37 641157 37 641168 39 641169 39 641170 39 641171 39 641172 39 641173 39 641174 39 641175 39 641176 39 641177 39 641186 17 Part No. Page Note:This index lists all cataloged parts by base no. only. Complete part nos. (with prefixes and/or suffixes) are shown on the page(s) indicated. Part Number Index Part No. Page Part No. Page Part Number Index MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Part No. Page Part No. Page Part No. Page 644876 23 644877 23 644878 37 644884 22 644885 22 644886 22 644887 22 644888 22 644889 22 644890 22 644891 22 644892 32 644893 32 644894 32 644896 32 644897 32 644898 32 647000 20 647001 20 647002 20 647003 20 647004 20 647005 20 647006 20 647007 20 647008 20 647009 20 647010 20 647011 20 647012 20 647013 20 647014 20 647015 20 647016 20 647017 20 647018 20 647019 20 647020 20 647021 20 647022 20 647023 20 647030 20 647031 20 647032 20 647033 20 647047 27 647048 27 647050 28 647051 28 647075 27 647076 27 647078 28 647079 28 647106 29 647107 29 647108 29 647109 27 647114 27 647116 28 647117 28 647123 53 647124 53 Part No. Page Part Number Index(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

770476 59, 60 770522 59 770849 60 770894 61 971111 71 1123721 64 1123722 64 58009 76, 79 58010 76, 79 58024 76, 78, 79 58039 76, 79 58040 76, 79 58061 76, 79 58074 76, 77, 79 58075 76, 77 58082 76, 79 58242 76, 79 58243 76, 79 58244 76, 79 58245 76, 79 58246 76, 79 58247 76, 79 58338 76, 77, 79 58392 76, 79 58442 76, 79 58443 76, 79 Part No. Page Part Number Index Part No. Page Part No. Page 1123723 65 1123724 68 1123823 69 1123824 69 1318300 65 1318301 68 1318831 69 1318912 64 1375819 31 1375820 31 1445120 9 1445121 10 1445123 9 1445124 10 1445125 9 1445126 10 1445169 9 1445170 9 1445171 9 1445172 10 1445173 10 1445174 10 1445336 31 1445341 7 1445342 7 1445343 7 1445344 7 1445345 7 1445346 7 1445347 7 1445348 7 1445349 7 1445350 7 Part No. Page 1445351 7 1445352 7 1445353 7 1445354 7 1445355 7 1445356 7 1445357 7 1445358 7 1445359 5 1445360 5 1445361 5 1445362 5 1445363 5 1445364 5 1445365 5 1445366 5 1445367 5 1445368 5 1445369 5 1445370 5 1445371 5 1445372 5 1445373 5 1445374 5 1445375 5 1445376 5 1744017 48 1744020 15 1744036 67 1744037 67 1744048 67 1744055 66 1744056 66 Part No. Page Application Tooling Part Number Index 58517 31 58575 76, 78, 79 58576 76, 78, 79 58579 76 58614 59 58635 76, 79 58636 76, 79 58638 76, 79 58639 76 58644 76, 79 58646 76, 79 59803 76, 79 59804 76, 79 59836 17 59837 41 59839 76 59845 79 59848 76, 79 90471 59 Part No. Page 91112 78, 79 91579 64 312522 76, 78, 79 354500 79 466468 59 466727 76, 79 466728 76, 79 466747 17 466947 59 471273 78, 79 567020 76, 79 567373 31 567827 31 567828 59 567910 31 680211 59 690675 78, 79 853542 76, 79 853546 76, 79 Part No. Page 853547 76, 79 854175 76, 79 854176 76, 79 854200 76, 79 854449 78 854468 78, 79 856600 76, 79 931800 76, 77, 79 933567 76, 79 933568 76, 79 1385286 64 1583503 76, 79 1583514 76, 79 1583515 76, 79 1583516 76, 79 1583517 76, 79 1583518 76, 79 Part No. Page Part Number Index(Continued) MTA, CST-100 II, SL-156 and AMP Economy Power (EP) Connectors Catalog 82056 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-08 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013

Tyco Electronics Corporation www.tycoelectronics.com Americas Asia/Pacific Argentina– Buenos Aires Phone: +54-11-4733-2200 Fax: +54-11-4733-2211 Brasil– São Paulo Phone: +55-11-2103-6000 Fax: +55-11-2103-6030 Chile– Santiago Phone: +56-2-345-0361 Canada – Toronto Phone: +905-475-6222 Fax: +905-474-5520 Product Information Center: Phone: +905-470-4425 Fax: +905-474-5525 Colombia – Bogota Phone: +57-1-319-8959 Mexico – Mexico City Phone: +52-55-1106-0800 +01-800-733-8926 Fax: +52-55-1106-0901 For Latin/South American Countries not shown Phone: +54-11-4733-2015 Fax: +54-11-4733-2083 Australia– Sydney Phone: +61-2-9554-2600 Fax: +61-2-9502-2556 Product Information Center: Phone: +61-2-9840-8200 Fax: +61-2-9634-6188 India– Bangalore Phone: +91-80-285-40800 Fax: +91-80-285-40820 Indonesia– Jakarta Phone: +65-6482-0311 Fax: +65-6482-1012 Japan – Kawasaki, Kanagawa Phone: +81-44-844-8111 Fax: +81-44-812-3207 Product Information Center: Phone: +81-44-844-8013 Fax: +81-44-812-3200 Korea – Seoul Phone: +82-2-3415-4500 Fax: +82-2-3486-3810 Malaysia– Selangor Phone: +60-3-7805-3055 Fax: +60-3-7805-3066 New Zealand – Auckland Phone: +64-9-634-4580 Philippines– Makati City Phone: +632-848-0171 Fax: +632-867-8661 People’s Republic of China Hong Kong Phone: +852-2735-1628 Fax: +852-2735-0243 Shanghai Phone: +86-21-2407-1588 Fax: +86-21-2407-1599 Singapore– Singapore Phone: +65-6482-0311 Fax: +65-6482-1012 Taiwan– Taipei Phone: +886-2-8768-2788 Fax: +886-2-8768-2268 Thailand– Bangkok Phone: +66-2-955-0500 Vietnam – Ho Chi Minh City Phone: +84-8-930-5546 United States Harrisburg, PA Phone: +1-717-564-0100 Fax: +1-717-986-7575 Product Information Center: Phone: +1-800-522-6752 Fax: +1-717-986-7575 Troy, MI Phone: +1-248-273-3359 Fax: +1-248-273-3322 Europe/Middle East/Africa Austria– Vienna Product Information Center: Phone: +43-1-905-60-1249 Belarus– Minsk Phone: +375 17 237 47 94 Fax: +375 17 237 47 94 Belgium – Kessel-Lo Phone: +32-16-352-300 Bulgaria– Sofia Phone: +359-2-971-2152 Fax: +359-2-971-2153 Czech Republic and Slovakia Czech Republic– Kurim Phone: +420-541-162-111 Fax: +420-541-162-223 Product Information Center: Phone: +420-541-162-113 Fax: +420-541-162-132 Denmark – Glostrup Egypt – Cairo Phone: +202-419-2334 Fax: +202-417-7647 Estonia– Tartu Phone: +372-5138-274 Fax: +372-7400-779 Finland– Helsinki France– Cergy-Pontoise Cedex Phone: +33-1-3420-8888 Fax: +33-1-3420-8600 Product Information Center: Phone: +33-1-3420-8686 Fax: +33-1-3420-8623 France Export Divisions– Cergy-Pontoise Cedex Phone: +33-1-3420-8804 Fax: +33-1-3420-8699 Germany – Bensheim Phone: +49-6251-133-0 Fax: +49-6251-133-1600 Product Information Center: Phone: +49-6251-133-1999 Fax: +49-6251-133-1988 Greece – Athens Phone: +30-210-9370-396/397 Fax: +30-210-9370-655 Hungary – Budapest Phone: +36-1-289-1000 Product Information Center: Phone: +36-1-289-1016 Ireland– Dublin Phone: +353-1-866-5612 Fax: +353-1-866-5714 Israel– Petach- Tikva Phone: +972-3-929-0999 Fax: +972-3-919-1088 Italy– Collegno (Torino) Phone: +39-011-4012-111 Fax: +39-011-4031-116 Product Information Center: Phone: +39-011-4012-428 Lithuania and Latvia Lithuania– Vilnius Phone: +370-5-213-1402 Fax: +370-5-213-1403 Product Information Center: Phone: +370-5-211-3016 Fax: +370-5-213-1403 Netherlands– ’s-Hertogenbosch Phone: +31-73-6246-246 Fax: +31-73-6212-365 Product Information Center: Phone: +31-73-6246-999 Fax: +31-73-6246-998 Norway – Nesbru Poland– Warsaw Phone: +48-22-4576-700 Fax: +48-22-4576-720 Product Information Center: Phone: +48-22-4576-704 Fax: +48-22-4576-720 Romania – Bucharest Phone: +40-21-311-3479/3596 Fax: +40-21-312-0574 Russia– Moscow Phone: +7-495-790-7902 Fax: +7-495-721-1893 Product Information Center: Phone: +7-495-790-7902-404 Fax: +7-495-790-7902-401 Russia– St. Petersburg Phone: +7-812-718-8192 Fax: +7-812-718-8193 Slovenia– Ljubljana Phone: +386-1561-3270 Fax: +386-1561-3240 South Africa– Port Elizabeth Phone: +27-41-503-4500 Fax: +27-41-581-0440 Spain– Barcelona Phone: +34-93-291-0330 Fax: +34-93-201-7879 Sweden – Upplands Väsby Switzerland– Steinach Phone: +41-71-447-0447 Fax: +41-71-447-0444 Turkey– Istanbul +90-212-282-513 0/ 5430 Fax: +90-212-281-8184 Ukraine– Kiev Phone: +380-44-206-2265 Fax: +380-44-206-2264 Product Information Center: Phone: +380-44-206-2265 Fax: +380-44-206-2264 United Kingdom – Stanmore, Middlesex Phone: +44-8706-080208 Fax: +44-208-954-6234 Product Information Center: Freephone (UK only): +0800-267 -666 Phone: +44-8706-080208 Fax: +44-208-420-8095 Global Contacts

Tyco Electronics Corporation Harrisburg, PA 82056–10K–MS–FP–6-08–OG3B