OM1325SMM ETC1 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
3.5 - 21 3.5 Three Terminal, Precision Adjustable Negative Voltage Regulator In Hermetic Style Packages (LM137A) 4 11 R2 Supersedes 1 07 R1
1.5 AMP NEGATIVE ADJUSTABLE VOLTAGE
REGULATOR APPROVED TO DESC DRAWING 7703406 OM1325STM OM1325N2M OM1325NMM OM1325NTM OM1325SMM OM1325NKM
FEATURES
- Similar To Industry Standard LM137A
- Approved To DESC Standardized Military Drawing Number 7703406
- Built In Thermal Overload Protection
- Short Circuit Current Limiting
- Available In Six Package Styles
- Maximum Output Voltage Tolerance Is Guaranteed to +
DESCRIPTION
These three terminal negative regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from -1.2 volts to -37 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25°C Power Dissipation Thermal Resistance, Junction to Case: Maximum Output Current: Recommended Operating Conditions: Ambient Operating Temperature Range (T Please see mechanical outlines herein
3.5 - 22 3.5 OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M Parameter Symbol Test Conditions Min. Max. Unit Reference Voltage V REF VDIFF = 3.0V, TA = 25°C -1.262 -1.238 Line Regulation R LINE 3.0 V ≤VDIFF ≤ 40V, TA = 25°C -4.5 4.5 (Note 1) 3.0V ≤ VDIFF ≤ 40V • -13.8 13.8 mV Load Regulation R LOAD VDIFF = 5V, 8mA ≤ IL ≤ 1.5A • -25 25 (Note 1) VDIFF = 12V, 8mA ≤ IL ≤ 1.5A, TA = 25°C -25 25 mV VDIFF 40V, 8mA ≤ IL ≤ 1.5A, TA = 25°C -25 25 VDIFF = 40V, 8mA ≤ IL ≤ 1.5A • -50 50 Thermal Regulation V RTH Vin= -14.6V, IL = 1.5A -5 5 mV Pd = 20 Watts, t = 10 ms, TA = 25°C Ripple Rejection R N f = 120 Hz, Vout= Vref • 66 dB (Note 2) C Adj= 10 µF Adjustment Pin Current I Adj VDIFF = 3.0V • 100 VDIFF = 40V • 100 µA Adjustment Pin ∆I Adj Current Change (line) 3V ≤ VDIFF ≤ 40V • -5 5 µA ∆IAdj (load) VDIFF = 5V, 8mA ≤ IL ≤ 1.5A • -5 5 µA Miminum Load Current I Lmin VDIFF = 3.0V, Vout= -1.4V (forced) • 3.0 VDIFF = 10V, Vout= -1.4V (forced) • 3.0 mA VDIFF = 40V, Vout= -1.4V (forced) • 5.0 Current Limit I CL VDIFF ≤5 V • 1.5 3.5 (Note 2) VDIFF = 40V, TA = 25°C 0.24 1.2 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The
- denotes the specifications which apply over the full operating temperature range. PART NUMBER DESIGNATOR Standard Military Drawing Number Omnirel Part Number Omnirel Package Designation 7703406M OM1325SMM SMD-3 7703406U OM1325STM TO-257 (Isolated) 7703406T OM1325NTM TO-257 (non-Isolated) 7703406Y OM1325NKM TO-3 7703406N OM1325NMM SMD-1
77034062 OM1325N2M LCC-20
ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM
3.5 - 23 3.5 Parameter Symbol Test Conditions Min. Max. Unit Reference Voltage V REF VDIFF = 3.0V, TA = 25°C -1.262 -1.238 Line Regulation R LINE 3.0 V ≤VDIFF ≤ 40V, TA = 25°C -4.5 4.5 (Note 1) 3.0V ≤ VDIFF ≤ 40V • -13.8 13.8 mV Load Regulation R LOAD VDIFF = 5V, 8mA ≤ IL ≤ 200 mA • -25 25 (Note 1) VDIFF = 15V, 8mA ≤ IL ≤ 200m, ATA = 25°C -25 25 mV VDIFF 40V, 8mA ≤ IL ≤150 mA, ATA = 25°C -25 25 VDIFF = 40V, 8mA ≤ IL ≤ 50 mA • -50 50 Thermal Regulation V RTH Vin= -16.25V, IL =330 mA -5 5 mV Pd =5 Watts, t = 10 ms, TA = 25°C Ripple Rejection R N f = 120 Hz, Vout= Vref • 66 dB (Note 2) C Adj= 10 µF Adjustment Pin Current I Adj VDIFF = 3.0V • 100 VDIFF = 40V • 100 µA Adjustment Pin ∆I Adj Current Change (line) 3V ≤ VDIFF ≤ 40V • -5 5 µA ∆IAdj (load) VDIFF = 5V, 8mA ≤ IL ≤ 500 mA • -5 5 µA Miminum Load Current I Lmin VDIFF = 3.0V, Vout= -1.4V (forced) • 3.0 VDIFF = 10V, Vout= -1.4V (forced) • 3.0 mA VDIFF = 40V, Vout= -1.4V (forced) • 5.0 Current Limit I CL VDIFF ≤5 V • 0.5 1.8 (Note 2) VDIFF = 40V, TA = 25°C 0.15 0.65 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The
- denotes the specifications which apply over the full operating temperature range. OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M *C inis required if regulator is located more than 4 inches from power supply filter. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. ** C o is necessary for stability. A 1 µF solid tantalum or 10 µF aluminum electrolytic is recommended. V out= -1.25 V (1 +R2) R 1 OM1325STM 1.0µF 1.0µF -VIN -VOUT VOUTVIN IAdj IPROG C IN*C O ** R 2 R 1 120Ω TYPICAL APPLICATION ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1325N2M
3.5 OM1325NTM, OM1325STM, OM1325NKM, OM1325SMM, OM1325NMM, OM1325N2M OM1325SMM Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Case - Isolated OM1325STM OM1325NTM Isolated Non-Isolated Front View Front View Pin 1 - Adjust Pin 1 - Adjust Pin 2 - Input Pin 2 - Input Pin 3 - Output Pin 3 - Output Tab - Isolated Tab - Input OM1325NMM Pin 1 - Adjust Pin 2 - Output Pin 3 - Input OM1325NKM Pin 1 - Adjust Pin 2 - Output Case - Input OM1325N2M Pin 1 VOUT Pin 11 VIN Pin 2 VOUT (Sense) Pin 12 NC Pin 3 NC Pin 13 NC Pin 4 NC Pin 14 NC Pin 5 NC Pin 15 NC Pin 6 NC Pin 16 ADJUST Pin 7 NC Pin 17 NC Pin 8 NC Pin 18 NC Pin 9 NC Pin 19 NC Pin 10 NC Pin 20 NC For additional information please see the mechanical outline section. .430xnonmarkingreturn .410xnonmarkingreturn .200xnonmarkingreturn .190xnonmarkingreturn .038 MAX.xnonmarkingreturn .005xnonmarkingreturnxnonmarkingreturn .120 TYP.xnonmarkingreturn .537xnonmarkingreturn .527xnonmarkingreturn .665xnonmarkingreturn .645xnonmarkingreturn .420xnonmarkingreturn .410xnonmarkingreturn.150xnonmarkingreturn .140xnonmarkingreturn .750xnonmarkingreturn .500xnonmarkingreturn.100 TYP.xnonmarkingreturn.035xnonmarkingreturn .025xnonmarkingreturn .045xnonmarkingreturn .035xnonmarkingreturn MECHANICAL OUTLINE .425xnonmarkingreturn .200xnonmarkingreturn xnonmarkingreturn xnonmarkingreturn xnonmarkingreturn .100xnonmarkingreturn .350 MIN.xnonmarkingreturn .080 xnonmarkingreturn xnonmarkingreturn .160xnonmarkingreturn .020xnonmarkingreturn ± .020xnonmarkingreturn .035 WIDExnonmarkingreturn FLAT 3 PLCS.xnonmarkingreturn .115xnonmarkingreturn .425xnonmarkingreturn .140 .415 .157 .015 .140 .140 .075.075 .062 .375 .030 MIN. .075 (±.010) TYP. .040.020 X45° REF . .040 X45° REF (3 PL) .010 .160 SQ. REF. .065 .009 R. 20 PLCS. 18 14 .003 .050 TYP. .050 (±.005) TYP. .085 .025 SQ. TYP. (±.003) .025 TYP. 12 3 1 2 1.197 1.177 0.675 0.6550.188 R. MAX. 0.440 0.420 0.161 0.151 0.525 R. MAX. 0.225 0.205SEATING PLANE 0.312 MIN. 0.450 0.250 0.043 0.038 2 PLCS. 0.135 MAX. 0.875 MAX. 1.53 REF.