770-003A GLENAIR | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
90° Boots C © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, 90° Angle Shrink Boots 770-003A Angled Boot, No Eyelet How to Order AS85049/141 Cross Ref. Boot Size Glenair US Part Marking AS85049/141 Ref
02 A02
03 A03 01
04 A04 02
05 A05 03
06 A06 04
07 A07 05
08 A08 06
09 A09 07
Lipped, right angle heat shrink boots provide mechanical and environmental protection from damage and debris . These shrink boots fit most standard boot adapters for circular connectors . All adhesive lined and unlined shrink books are RoHS compliant . Shrink boots are water-tight when equipped with factory installed or user-installed adhesive . Lipped boots lock into boot groove located on adapter . Choose boot size based on adapter diameter and cable diameter . How to Order Sample Part Number 770 -003 A 1 03 W1 -DH Product Series 770 = Series 77 shrink boot Basic Number 003 = lipped boot Angular Function A = 90° Material See material and adhesives table Boot Size 02, 03, 04, 05, 06, 07, 08, 09; see dimensions table Adhesive Lined Omit for no adhesive; see material and adhesives table Potting Port or Drain Hole PP = potting port DH = drain holes Omit for none NOTES 1 . See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material . Material and Adhesive Compatibility Material Code Material Description (Compound No.) Hot Melt Adhesives High Performance Epoxy Adhesives W1 W2 W3 (TACOM approved) R U High Temperature -55°C to 125°C Standard -55°C to 70°C Elastomeric -55°C to 125°C Pre-Coat -75°C to 150°C Two-Part -75°C to 155°C
1 High-Performance Semi-Rigid Elastomer (2025)
boot materials . Ordered separately, user-installed (779-001) . Order boot with no adhesive lining .
2 Zero Halogen Semi-Rigid Polyolefin (2010)
3 General Purpose Flexible Polyolefin (2040)
5 Viton Fluoroelastomer Blend (2050)
6 High Performance Elastomer Alloy (2051)
7 Semi-Rigid Polyolefin (2071)
8 Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive . Use Type U two-part epoxy
9 Low Temp Flexible Polyolefin (2013)
90° Boots C © 2017 Glenair, Inc • 1211 Air Way, Glendale, CA 91201 • 818-247-6000 • www.glenair.com • Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 • Dimensions in Inches (millimeters) are subject to change without notice. SERIES 77 Lipped, 90° Angle Shrink Boots 770-003A Angled Boot, No Eyelet Dimensions Dimensions Boot Size Shell Size Ae DIA MIN Ce DIA MIN Ar DIA MAX at ±30% Cr DIA MAX ct ±20% CO REF P±20% R Ref As Supplied Size 02 to 09Recovered Cr ct P Ar at R CeAe Potting Port (If Required) Lipped Right Angle Adapter Shrink Boots: Dimensions A03 GLENAIRA C EXPANDED RECOVERED LETTER “C” INDICATES CABLE END LETTER “A” INDICATES ADAPTER (CONNECTOR) END BOOT SIZE CODE LETTER “A” INDICATES STRAIGHT BOOT Lipped Right Angle Shrink Boots: Part Marking, Raised Lettering For materials Type 2, Type 3 and Type 9, dimension 'Ce' is nominal