767-100-35 FOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 1

Technical content

Farnell Order Code: 1538960 FOX MODEL: FXO-HC535R-100 FOX Part Number: 767-100-35 HCMOS, CERAMIC, SMD, OSCILLATOR NOTE : The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Reference / Comments Title / Description: Product Specifications Drawing Number: DWG-4548-1 Rev: 1 Size: A Part Number: 767-100-35 Cage: 61429 Draftsperson: AR Approved: BN Date: 01/15/2008 Page 1 of 1 Specifications Parameter s Frequency 100 MHz Frequency Stability 1 ±50 PPM Temperature Range Operating (TOPR) Storage (TSTG) -40°C ~ +85°C -55°C ~ +125ºC Supply Voltage (VDD) 3.3V ± 5% Input Current (IDD) 47 mA Max Output Voltage (VOL) (VOH) 10% VDD Max 90% VDD Min Output Symmetry ( 50% Vp-p Level) 45% ~ 55% Rise Time (10% ~ 90% Vp-p) (TR) Fall Time (90% ~ 10% Vp-p) (TF) 3 nS Max 3 nS Max Output Load (HCMOS) 15 pF Max Startup Time (TS) 10 ms Max Output Enable / Disable Time 2 100 nS Max Phase Jitter (12kHz ~ 20MHz) 1.32pS Typ. Maximum Soldering Temp / Time 260°C / 10 Seconds Moisture Sensitivity Level (MSL) 1 Termination Finish Au

1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load

change, aging, shock, and vibration. 2An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. ENABLE/DISABLE FUNCTION2 Pin 1 OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level VIH ≥ 70%VDD ACTIVE '0' Level VIL ≤ 30%VDD High Z NOTE: A 0.01µF bypass capacitor should be placed between VDD (Pin4) and GND (Pin 2) to minimize power supply line noise. RoHS Compliance Status: Compliant Mechanical / Dimensions ( millimeters): Recommended Circuit Pin Connections #1) E/D #3 Output #2 GND #4 VDD *TP are test points and are NC

5.15 Max

1.4 Max

3.35 Max

0.64 2.54 1.2 1.24 2.54 2.25 Pin 1 Designator (FOX Head or Dot) 1.29 Note: XPRESS O HCMOS XOs are designed to fit on industry standard, 4 pad, layouts. #4 TP* #3 #2TP*#1 1.27 Top View Bottom View GND E/D HCMOS LOAD (15 pF) N C # 4 # 3# 2 # 1 OUT 0.01 F DDV N C Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary