761-5-1CNIL OENINDIA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
l Minimum Space requirement l Low Profile l Open & Sealed versions l Twin Relay Versions available APPLICATION l Direction Indicators l Wiper Control l Fuel pump l Central Locking l Window winding motors l Air Conditioning TECHNICAL DATA FOR CONTACT SIDE : GENERAL DATA FOR COIL SIDE Nominal Coil Power : 1.2W (Approx) Operating Power : 0.68W (Approx) Operate Time* : 5 milli Seconds Release Time* : 3 milli Seconds *** At nominal voltage without coil suppression (excluding bounce) 0 0 Ambient Temperature : -25 C to +85 C Dielectric Strength : 500VRMS Insulation Resistance : 100 Meg. Ohms Min. At 500 VDC, 0 -25 C RH 50 Vibration Resistance (without change : 10-50Hz 4.4g in the switching state>10µS) Shock Resistance (without change : 30g, 8mS In the switching state>10µS) OPERATING CONDITIONS CIRCUIT DIAGRAM MINI AUTOMOTIVE RELAY
1 Form C
1 Form A
View : Terminal Side
1 Form U
Contact Configuration : 1A/1U/1C 2x1A/2x1U/2x1C 1A/1U Contact Material : Silver Nickel/Silver Tin Oxide Palladium copper*/ Silver Nickel Contact Rating at 23 C (Res) 12VDC : 20/10A 2x20/10A Lamp Load at 14VDC : 60W 2x60W 80W 5 5 5 Electrical Life Operations Min. : 1 x 10 1 x 10 5 x 10 7 7 7 Mechanical Life Operations Min. : 1 x 10 1 x 10 1 x 10 Contact Voltage Drop at 10 A (Min) : 60mV 60mV 100mV Maximum Switching Current : 50A 50A 50A@ 12.8 VDC For 3 Sec. For 1U version with AgSnO2 contacts. Expected electrical life is 2 x 10 operations Areas of Application RESISTIVE / INDUCTIVE / HEAD LAMP LOADS INDICATOR LAMP LOAD *The moving contact (Pdcu) must be connected to positive potential Model : 76S1/76S3 76T 76S2
*Lower pick-up Voltages available on request COIL DATA DIMENSIONS 5 3.75 0.5 25 6 4.50 0.6 30 12 9.00 1.2 130 24 18.00 2.4 570 20.0 15.0 18.0 3.5±0.3
76 S 1 - 12 - 1C E XXX
(Refer Coil Data) S - Single Relay T - Twin Version O - Open Version Nominal Voltage VDC Coil Resistance Ohms ± 10% Drop-out Voltage VDC (Min) l Special coil resistance & pick-up l Special contact maternal l For other custom solutions consult factory Contact Arrangement 1C - 1 Form C 1A - 1 Form A 1U - 1 Form U Nil - Unsealed E - Sealed Contact Mational
1 Silver Nickel
2 Palladiumk Copper*
3 Silver Tin Oxide*
4 Tungsten*
*Under Introduction Specialities if any Single Relay Twin Version 18.0 8.89 3.81 3.5±0.3 20.0 Single Relay Twin Version 2 A 2 U 8xØ1.3 10xØ1.3 2 C10xØ1.3 8.89 3.81 5.08 5.08 *Depending on the contact material & contact configuration electrical life will vary. Consult Factory before finalising the part number 29.5 5.08 5.08 8.89 3.81 5.08 5.08 5xØ1.3 4xØ1.3 1 C 1 A 1 U 5xØ1.3 AVAILABLE ON REQUEST *Pick-up Voltage VDC (Max) DRILLING PATTERN