DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20220601 (1/4) inductor_automotive_decoupling_mlj1608-g_en.fm INDUCTORS Inductors for decoupling circuits Multilayer ferrite MLJ-G series (for automotive PoC) MLJ1608-G type
FEATURES
The small multilayer inductor ideal for PoC (Power Over Coax) circuits. A wide band and high impedance characteristics are realized by the original circuit structure. It is suitable for high current applications due to its good DC superimposition characteristics due to the low loss ferrite mat erial. Operating temperature range: –55 to +125°C APPLICATION PoC for in-vehicle use (camera, DMS, etc.) PART NUMBER CONSTRUCTION CHARACTERISTICS SPECIFICATION TABLE Measurement equipment ˎEquivalent measurement equipment may be used. MLJ 1608 WG C R56 N T D25 Series name L×W×H dimensions Characteristics Internal code Inductance Inductance tolerance Packaging style Internal code1.6×0.8×0.8 mm (µH) L L measuring conditions DC resistance Rated current Part No. Frequency Current 105°C 125°C (µH) Tolerance (MHz) (mA) ()typ. ()max. (mA)max. (mA)max. 0.56 ±30% 25 1 0.45 0.7 500 400 MLJ1608WGCR56NTD25 Measurement item Product No. Manufacturer L 4294A+16034G Keysight Technologies ߅Type-755611 Y okogawa REACH SVHC-Free Lead FreeRoHS Pb Halogen Free BrCl AEC-Q200
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20220601 (2/4) inductor_automotive_decoupling_mlj1608-g_en.fm INDUCTORS MLJ1608-G type L FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. IMPEDANCE VS. FREQUENCY CHARACTERISTICS Measurement equipment ˎEquivalent measurement equipment may be used. Product No. Manufacturer 4991A+16192A Keysight Technologies Product No. Manufacturer 4991A+16192A Keysight Technologies 0.001 0.01 0.1 1 10 100 1000 Inductance(μH) Frequency(MHz) WGCR56 Impedance(Ω) 500 1000 1500 2000 2500 3000 10 100 1000 Frequency(MHz) WGCR56
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20220601 (3/4) inductor_automotive_decoupling_mlj1608-g_en.fm INDUCTORS MLJ1608-G type SHAPE & DIMENSIONS RECOMMENDED LAND PATTERN RECOMMENDED REFLOW PROFILE PACKAGING STYLE REEL DIMENSIONS TAPE DIMENSIONS PACKAGE QUANTITY TEMPERATURE RANGE, INDIVIDUAL WEIGHT The storage temperature range is for after the assembly. Dimensions in mm 0.8±0.150.8±0.15 1.6±0.15 0.3±0.2 Dimensions in mm 0.8 0.6 0.8 0.6 Natural cooling 10s max. 60 to 120s Preheating 30 to 60s Soldering 230°C 230°C 250 to 260°C 180°C 150°C Time Peak Temperature Type A B K Package quantity 4000 pcs/reel Operating temperature range Storage temperature range Individual weight –55 to +125 °C –55 to +125 °C 4 mg ø180±2.0 2.0±0.5 ø13±0.2 ø21±0.8 ø60min. 14.4max. Dimensions in mm 1.0 E 8.4 +2.0 –0.0 K 8.0±0.3 1.75±0.1 4.0±0.1 4.0±0.1 2.0±0.05 B A 3.5±0.05 Dimensions in mm Sprocket hole 1.5 +0.1 Cavity 160min. Taping 200min. 300min.Drawing direction Dimensions in mm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use. Please note that the contents may change without any prior notice due to reasons such as upgrading. 20220601 (4/4) inductor_automotive_decoupling_mlj1608-g_en.fm INDUCTORS REMINDERS FOR USING THESE PRODUCTS Before using these products, be sure to request the delivery specifications. SAFETY REMINDERS Please pay sufficient attention to the warnings for safe designing when using this products. The storage period is within 12 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or less). If the storage period elapses, the soldering of the terminal electrodes may deteriorate. Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150°C. Soldering corrections after mounting should be within the range of the conditions determined in the specifications. If overheated, a short circuit, performance deterioration, or lifespan shortening may occur. When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal design. Carefully lay out the coil for the circuit board design of the non-magnetic shield type. A malfunction may occur due to magnetic interference. Use a wrist band to discharge static electricity in your body through the grounding wire. Do not expose the products to magnets or magnetic fields. Do not use for a purpose outside of the contents regulated in the delivery specifications. The products described in this catalog are intended to be installed in automobiles or automotive electronic equipment (AV equip ment, telecommunications equipment, home appliances, amusement equipmen t, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) and to be used in automobiles (including the case where the said automotive product is mounted in a vehicle) or standard applications as general electronic equipment in automotive applications or standard applications as gene ral electronic equipment in automotive applications in accordance with the scope and conditions described in this specification, while the sai d automotive or general electronic equipment including the said product is intended to be used in the usual operation and usage methods, respec tively. Other than automotive or automotive products are not designed or warrant ed to meet the requirements of the applications listed below, whose performance and/or quality requires a more stringent level of safe ty or reliability, or whose fa ilure, malfunction or defect co uld cause serious damage to society, person or property. Please understand that we are not responsible for any damage or liability caused by use of the products in any of the applicati ons below or for any other use exceeding the range or conditions set forth in this specification sheet. If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in this specification, please contact us. (1) Aerospace/aviation equipment (2) Transportation equipment (electric trains, ships, etc.) (3) Medical equipment (4) Power-generation control equipment (5) Atomic energy-related equipment (6) Seabed equipment (7) Transportation control equipment (8) Public information-processing equipment (9) Military equipment (10) Electric heating apparatus, burning equipment (11) Disaster prevention/crime prevention equipment (12) Safety equipment (13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general- purpose applications, you ar e kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment. REMINDERS