7580210 TURCK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Edition • 2023-07-21T16:32:55+02:00 Frequency Transducer/Pulse Counter 2-channel IMX12-FI01-2SF-2I-CPR/24VDC/CC The frequency transducer/pulse counter IMX12-FI01-2SF-2I-CPR/24VDC/CC is equipped with intrinsically safe input cir- cuits and transmits frequency signals up to 20,000 Hz from the Ex area to the non-Ex area such that the signals are galvanically isolated. In addition, the input signals can be monitored for slip. The devices are suitable for operation in zone 2. Each channel of the 2-channel device is equipped with an intrinsically safe input for sensors in accordance with EN 60947-5-6 (NAMUR) or potential-free contacts. Remov- able spring type terminals are present for con- nection purposes. A current output (0/4…20 mA) is available on the output side. The device can be powered from a power bridge that also transmits a col- lective fault signal. The device is parameterized via FDT and IODD with a PC. The current output can be set to 0/4…20 mA (source or sink optional). In accordance with the parameterization (I1, I2, I1 - I2 or I2 - I1), the input signals are output as a 0/4…20 mA normalized current signal. The devices have a green power LED (Pwr) and a red LED to indicate internal faults. For each input circuit there is a yellow and a red status LED. A fault in the input circuit leads to a flashing red LED according to NE44, an internal error to a steady red LED. The fault current can be adjusted to < 3.5 mA or > 21.5 mA. The device can be used in safety circuits up to SIL2 (high and low demand according to IEC 61508) and meets the requirements of NE21. The device is equipped with removable spring-type terminals. ■ Input circuits monitored for wire-break and short-circuit ■ Parameterized via PC ■ Complete galvanic isolation ■ Input reverse-polarity protected ■ Removable spring type terminals ■ Power bridge (connector incl. in delivery) ■ ATEX, IECEx, cFM, cUL, NEPSI, IN- METRO, KOSHA, TR CU EAC CMI, TIIS, ■ Installation in zone 2 ■ SIL 2

Edition • 2023-07-21T16:32:55+02:00 Type IMX12-FI01-2SF-2I-CPR/24VDC/CC ID 7580210 Nominal voltage 24 VDC Operating voltage 10…30 VDC Power consumption ð 3 W Power dissipation, typical ð 1.7 W Monitoring range/Setting range ð 0.0006…1200000 min NAMUR input NAMUR EN 60947-5-6 No-load voltage 8.2 VDC Short-circuit current 8.2 mA Input resistance 1 kò Cable resistance ð 50 ò Switch-on threshold 1.75 mA Switch-off threshold 1.55 mA Wire breakage threshold ð 0.06 mA Short-circuit threshold ï 6.4 mA Output circuits Output current 2 × source/sink (15…28 V) 0/4…20 mA Load resistance current output ð 0.8 kò Power-Bridge common alarm output MOSFET, Umax = 30 V, Imax = 100 mA Response characteristic Reference temperature 23 °C Measuring accuracy current output (including linearity, hysteresis and repeatability) ± 10 µA Temperature drift ð 0.0025 % of full scale/K Galvanic isolation Test voltage 2.5 kV RMS E1,E2-A1A,A2A 375 V peak value acc. to EN 60079-11 A1A supply voltage 300 V RMS acc. to EN 50178 and EN 61010-1 A2A supply voltage 300 V RMS acc. to EN 50178 and EN 61010-1 Important note For Ex-applications the values specified in the corre- sponding Ex certificates (ATEX, IECEx, UL, etc.) ap- ply. Ex approval acc. to conformity certificate TÜV 16 ATEX 192124 X Application area II (1) G, II (1) D Ignition protection category G [Ex ia Ga] IIC; D [Ex ia Da] IIIC Application area II 3 (1) G Ignition protection type Ex ec [ia Ga] IIC T4 Gc Important note If the device is used in applications to achieve func- tional safety according to IEC 61508, the safety manual must be used. Information in the data sheet are not valid for functional safety. Use in SIL safety circuits SIL 2 acc. to IEC 61508 Displays/Operating elements Operational readiness Green Error indication red Dimensions

Edition • 2023-07-21T16:32:55+02:00 Mechanical data Protection class IP20 Flammability class acc. to UL 94 V-0 Ambient temperature -25…+70 °C Storage temperature -40…+80 °C Dimensions 120 x 12.5 x 128 mm Weight 166 g Mounting instructions DIN rail (NS35) Housing material Polycarbonate/ABS Electrical connection Removable spring-type terminals, 2-pin Connection variant Power bridge with collective fault signal Terminal cross-section 0.2…2.5 mm² (AWG: 24…14) Environmental conditions Operating height Up to 2000 m above sea level Pollution degree II Surge/Overvoltage cate- gory II (EN 61010-1) Standards used Voltage resistance and insulation EN 50178 EN 61010-1 EN 50155 GL VI-7-2 Shock EN 61373 class B EN 50155 GL VI-7-2 EN 60068-2-6 EN 60068-2-27 Temperature EN 60068-2-1 Ad EN 50155 GL VI-7-2 EN 60068-2-2 Bd EN 60068-2-1 Air humidity EN 60068-2-38 EMC EN 50155 GL VI-7-2 NE21 EN 61326-1 EN 61326-3-1 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-11 EN 61000-4-29 EN 55011 EN 55016 EN 50121-3-2 EN 61000-6-2

Edition • 2023-07-21T16:32:55+02:00 Accessories Type code Ident-No. Dimension drawing IMC 1.5/ 5-ST-3.81 BK 7580954 Power Bridge Connection Terminal MCVR 1.5/ 5-ST-3.81 BK 7580955 Power Bridge Connection Terminal MC 1.5/ 5-ST-3.81 BK 7580956 Power Bridge Connection Terminal E/ME TBUS NS35 BK 7580957 Power Bridge Connection Terminal IMX12-PS02-UI-UIR- PR/24VDC/CC

7580611 Power supply module power bridge; Collective fault signal via

relay; Single and redundant power supply via terminals; Re- movable screw terminals USB-2-IOL-0002 6825482 IO-Link Master with integrated USB port

Edition • 2023-07-21T16:32:55+02:00 Accessories Type code Ident-No. Dimension drawing IOL-COM/3M 7525110 IO-Link communication line for connecting IO-Link devices to an IO-link master via a 3.5-mm jack plug IMX12-SC-2X-4BK 7580940 Screw terminals for IM(X)12 modules; included in delivery: 4 pcs. of 2-pin black terminals IMX12-SC-2X-4BU 7580941 Screw terminals for IM(X) 12 modules; included in delivery: 4 pcs. of 2-pin blue terminals IMX12-CC-2X-4BK 7580942 Spring terminals for IM(X)12 modules; included in delivery: 4 pcs. black terminals, 2-pin IMX12-CC-2X-4BU 7580943 Spring terminals for IM(X)12 modules; included in delivery: 4 pcs. blue terminals, 2-pin