750L05C

TL750L_07 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 20

Technical content

www.ti.com

FEATURES

TL750L . . . D PACKAGE (TOP VIEW) TL750L . . . KC PACKAGE (TOP VIEW) TL750L . . . LP PACKAGE (TO-92, TO-226AA) (TOP VIEW) OUTPUT COMMON COMMON NC INPUT COMMON COMMON ENABLE OUTPUT NC NC NC INPUT NC COMMON ENABLE TL751L . . . D PACKAGE (TOP VIEW) TL751L . . . P PACKAGE (TOP VIEW) INPUT COMMON OUTPUT NC − No internal connection TL750L . . . KTE PACKAGE (TOP VIEW) OUTPUT COMMON INPUT COMMON COMMON OUTPUT INPUT COMMON NC − No internal connection NC − No internal connection DESCRIPTION/ORDERING INFORMATION TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 Very Low Dropout Voltage, Less Than 0.6 V at Reverse Transient Protection Down to V 150 mA Internal Thermal-Overload Protection Very Low Quiescent Current Overvoltage Protection TTL- and CMOS-Compatible Enable on Internal Overcurrent-Limiting Circuitry TL751L Series Less Than 500- µ A Disable (TL751L Series) 60-V Load-Dump Protection The TL750L and TL751L series of fixed-output voltage regulators offer 5-V, 8-V, 10-V, and 12-V options. The TL751L series also has an enable ENABLE input. When ENABLE is high, the regulator output is placed in the high-impedance state. This gives the designer complete control over power up, power down, or emergency shutdown. The TL750L and TL751L series are low-dropout positive-voltage regulators specifically designed for battery-powered systems. These devices incorporate overvoltage and current-limiting protection circuitry, along with internal reverse-battery protection circuitry to protect the devices and the regulated system. The series is fully protected against 60-V load-dump and reverse-battery conditions. Extremely low quiescent current during full-load conditions makes these devices ideal for standby power systems. Please be aware that an important notice concerning availability, standard warranty, and use in critical

applications

sheet. PowerFLEX is a trademark of Texas Instruments. PRODUCTION DATA information is current as of publication date. Copyright 1987 2005, Texas Instruments Incorporated Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

www.ti.com TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 ORDERING INFORMATION V O TYP T J PACKAGE (1) ORDERABLE PART NUMBER (2) TOP-SIDE MARKING AT C PowerFLEX KTE Reel of 2000 TL750L05CKTER TL750L05C Tube of TL750L05CD 50L05C Reel of 2500 TL750L05CDR SOIC D Tube of TL751L05CD V 51L05C Reel of 2500 TL751L05CDR Bulk of 1000 TL750L05CLP TO-226/TO-92 LP 750L05C Reel of 2000 TL750L05CLPR TO-220 KC Tube of TL750L05CKC TL750L05C Tube of TL750L08CD SOIC D 50L08C V Reel of 2500 TL750L08CDR TO-226/TO-92 LP Bulk of 1000 TL750L08CLP 750L08C C to 125 C PDIP P Tube of TL751L10CP TL751L10C Tube of TL750L10CD 50L10C Reel of 2500 TL750L10CDR SOIC D V Tube of TL751L10CD 51L10C Reel of 2500 TL751L10CDR Bulk of 1000 TL750L10CLP TO-226/TO-92 LP 750L10C Reel of 2000 TL750L10CLPR Tube of TL750L12CD 50L12C Reel of 2500 TL750L12CDR SOIC D V Tube of TL751L12CD 51L12C Reel of 2500 TL751L12CDR TO-226/TO-92 LP Bulk of 1000 TL750L12CLP 750L12C (1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. (2) For the most current ordering information, see the Package Option Addendum at the end of this data sheet. DEVICE COMPONENT COUNT Transistors JFETs Diodes Resistors

www.ti.com Absolute Maximum Ratings (1) Package Thermal Data (1) Recommended Operating Conditions TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 over operating junction temperature range (unless otherwise noted) MIN MAX UNIT Continuous input voltage V Transient input voltage (2) T A C V Continuous reverse input voltage V Transient reverse input voltage t 100 ms V T J Operating virtual junction temperature 150 C Lead temperature 1,6 mm (1/16 in) for s 260 C T stg Storage temperature range 150 C (1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The transient input voltage rating applies to the waveform shown in Figure PACKAGE BOARD θ JC θ JA PDIP (P) High JESD 51-7 C/W C/W PowerFLEX (KTE) High JESD 51-5 C/W C/W SOIC (D) High JESD 51-7 C/W C/W TO-226/TO-92 (LP) High JESD 51-7 C/W 140 C/W TO-220 (KC) High JESD 51-5 C/W C/W (1) Maximum power dissipation is a function of T J (max), θ JA and T A The maximum allowable power dissipation at any allowable ambient temperature is P D J (max) T A θ JA Operating at the absolute maximum T J of 150 C can affect reliability. over recommended operating junction temperature range (unless otherwise noted) MIN MAX UNIT TL75xL05 TL75xL08 V I Input voltage V TL75xL10 TL75xL12 V IH High-level ENABLE input voltage TL75xLxx V T J C TL75xLxx 0.3 0.8 V IL (1) Low-level ENABLE input voltage V T J C to 125 C TL75xLxx 0.15 0.8 I O Output current TL75xLxx 150 mA T J Operating virtual junction temperature TL75xLxxC 125 C (1) The algebraic convention, in which the least positive (most negative) value is designated minimum, is used in this data sheet for ENABLE voltage levels and temperature only.

www.ti.com TL75xL05 Electrical Characteristics (1) TL75xL08 Electrical Characteristics (1) TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 V I I O mA, T J C (unless otherwise noted) TL750L05 TL751L05 PARAMETER TEST CONDITIONS UNIT MIN TYP MAX T J C 4.8 5.2 Output voltage V I V to I O to 150 mA V T J C to 125 C 4.75 5.25 V I V to V Input regulation voltage mV V I V to V Ripple rejection V I V to f 120 Hz dB Output regulation voltage I O mA to 150 mA mV I O mA 0.2 Dropout voltage V I O 150 mA 0.6 Output noise voltage f Hz to 100 kHz 500 µ V I O 150 mA Input bias current V I V to I O mA, T J C to 125 C mA ENABLE V 0.5 (1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1- µ F capacitor across the input and a 10- µ F capacitor, with equivalent series resistance of less than 0.4 Ω across the output. V I I O mA, T J C (unless otherwise noted) TL750L08 TL751L08 PARAMETER TEST CONDITIONS UNIT MIN TYP MAX T J C 7.68 8.32 Output voltage V I V to I O to 150 mA V T J C to 125 C 7.6 8.4 V I V to V Input regulation voltage mV V I V to V Ripple rejection V I V to f 120 Hz dB Output regulation voltage I O mA to 150 mA mV I O mA 0.2 Dropout voltage V I O 150 mA 0.6 Output noise voltage f Hz to 100 kHz 500 µ V I O 150 mA Input bias current V I V to I O mA, T J C to 125 C mA ENABLE V 0.5 (1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1- µ F capacitor across the input and a 10- µ F capacitor, with equivalent series resistance of less than 0.4 Ω across the output.

www.ti.com TL75xL10 Electrical Characteristics (1) TL75xL12 Electrical Characteristics (1) PARAMETER MEASUREMENT INFORMATION TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 V I I O mA, T J C (unless otherwise noted) TL750L10 TL751L10 PARAMETER TEST CONDITIONS UNIT MIN TYP MAX T J C 9.6 10.4 Output voltage V I V to I O to 150 mA V T J C to 125 C 9.5 10.5 V I V to V Input regulation voltage mV V I V to V Ripple rejection V I V to f 120 Hz dB Output regulation voltage I O mA to 150 mA 100 mV I O mA 0.2 Dropout voltage V I O 150 mA 0.6 Output noise voltage f Hz to 100 kHz 700 µ V I O 150 mA Input bias current V I V to I O mA, T J C to 125 C mA ENABLE V 0.5 (1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1- µ F capacitor across the input and a 10- µ F capacitor, with equivalent series resistance of less than 0.4 Ω across the output. V I I O mA, T J C (unless otherwise noted) TL750L12 TL751L12 PARAMETER TEST CONDITIONS UNIT MIN TYP MAX T J C 11.52 12.48 Output voltage V I V to I O to 150 mA V T J C to 125 C 11.4 12.6 V I V to V Input regulation voltage mV V I V to V Ripple rejection V I V to f 120 Hz dB Output regulation voltage I O mA to 150 mA 120 mV I O mA 0.2 Dropout voltage V I O 150 mA 0.6 Output noise voltage f Hz to 100 kHz 700 µ V I O 150 mA Input bias current V I V to I O mA, T J C to 125 C mA ENABLE V 0.5 (1) Pulse-testing techniques are used to maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 0.1- µ F capacitor across the input and a 10- µ F capacitor, with equivalent series resistance of less than 0.4 Ω across the output. The TL750L, TL751L series are low-dropout regulators. This means that capacitance loading is important to the performance of the regulator because it is a vital part of the control loop. The capacitor value and its equivalent series resistance (ESR) both affect the control loop and must be defined for the load range and temperature range. Figure shows the recommended range of ESR for a given load with a 10- µ F capacitor on the output.

www.ti.com TYPICAL CHARACTERISTICS 0 100 200 300 400 500 600 iV − Transient Input Voltage − V tr = 1 ms TA = 25° C t − Time − ms IL − Load Current − mA 0.2 0.1 0 0 10 ESR − Equivalent Series Resistance − 0.3 0.4 0.5 0.024 0.6 0.7 0.8 0.9 1.0 Region of Best Stability 80 120 150 Potential Instability Region CL = 10-µF Tantalum Capacitor TA = −40° C to 125° C Potential Instability Region Ω 0 2 4 6 8 12 1410 VI − Input Voltage − V − Input Current − mAII 0 1 2 3 − Input Current − mA 4 5 6 II VI − Input Voltage − V TL750L, TL751L SERIES LOW-DROPOUT VOLTAGE REGULATORS SLVS017S SEPTEMBER 1987 REVISED AUGUST 2005 TL750L05 TRANSIENT INPUT VOLTAGE EQUIVALENT SERIES RESISTANCE vs vs TIME LOAD CURRENT Figure Figure TL750L05 TL750L12 INPUT CURRENT INPUT CURRENT vs vs INPUT VOLTAGE INPUT VOLTAGE Figure Figure

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) 5962-9166901Q2A OBSOLETE LCCC FK 20 TBD Call TI Call TI 5962-9166901QPA OBSOLETE CDIP JG 8 TBD Call TI Call TI TL750L05CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L05CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L05CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L05CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L05CKC NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CKCE3 NRND TO-220 KC 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CKCS ACTIVE TO-220 KCS 3 50 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CKTER NRND PFM KTE 3 2000 TBD CU SNPB Level-1-220C-UNLIM TL750L05CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CLPM OBSOLETE TO-92 LP 3 TBD Call TI Call TI TL750L05CLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L05CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L05QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L05QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L05QKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L05QLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI TL750L05QP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L08CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL750L08CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL750L08CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL750L08CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR TL750L08CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L08CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L08CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L08CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L08QD OBSOLETE SOIC D 8 TBD Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com 10-Feb-2007 Addendum-Page 1

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) TL750L08QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L08QKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L08QLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI TL750L10CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L10CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L10CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L10CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L10CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L10CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L10CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L10CLPR ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L10CLPRE3 ACTIVE TO-92 LP 3 2000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L10CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L10QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L10QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L10QKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L10QLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI TL750L10QP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L12CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L12CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L12CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L12CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL750L12CKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L12CLP ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L12CLPE3 ACTIVE TO-92 LP 3 1000 Pb-Free (RoHS) CU SN N / A for Pkg Type TL750L12CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL750L12QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L12QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL750L12QKC OBSOLETE TO-220 KC 3 TBD Call TI Call TI TL750L12QLP OBSOLETE TO-92 LP 3 TBD Call TI Call TI TL750L12QP OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L05CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L05CDE4 ACTIVE SOIC D 8 75 Green (RoHS & CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 10-Feb-2007 Addendum-Page 2

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) no Sb/Br) TL751L05CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L05CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L05CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL751L05MFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI TL751L05MJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI TL751L05QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L05QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L05QP OBSOLETE PDIP P 8 TBD Call TI Call TI TL751L10CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L10CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L10CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L10CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L10CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL751L10CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type TL751L10QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L10QP OBSOLETE PDIP P 8 TBD Call TI Call TI TL751L12CD ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L12CDE4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L12CDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L12CDRE4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM TL751L12CP OBSOLETE PDIP P 8 TBD Call TI Call TI TL751L12MFKB OBSOLETE LCCC FK 20 TBD Call TI Call TI TL751L12MJGB OBSOLETE CDIP JG 8 TBD Call TI Call TI TL751L12QD OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L12QDR OBSOLETE SOIC D 8 TBD Call TI Call TI TL751L12QP OBSOLETE PDIP P 8 TBD Call TI Call TI (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. PACKAGE OPTION ADDENDUM www.ti.com 10-Feb-2007 Addendum-Page 3

TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 10-Feb-2007 Addendum-Page 4

MCER001A – JANUARY 1995 – REVISED JANUARY 1997 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.310 (7,87) 0.290 (7,37) 0.014 (0,36) 0.008 (0,20) Seating Plane 4040107/C 08/96 0.065 (1,65) 0.045 (1,14) 0.020 (0,51) MIN 0.400 (10,16) 0.355 (9,00) 0.015 (0,38) 0.023 (0,58) 0.063 (1,60) 0.015 (0,38) 0.200 (5,08) MAX 0.130 (3,30) MIN 0.245 (6,22) 0.280 (7,11) 0.100 (2,54) 0°–15° NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a ceramic lid using glass frit. D. Index point is provided on cap for terminal identification. E. Falls within MIL STD 1835 GDIP1-T8

MLCC006B – OCTOBER 1996 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 FK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER 4040140/D 10/96

28 TERMINAL SHOWN

B 0.358 (9,09) MAX (11,63) 0.560 (14,22) 0.560 0.458 0.858 (21,8) 1.063 (27,0) (14,22) ANO. OF MINMAX 0.358 0.660 0.761 0.458 0.342 (8,69) MIN (11,23) (16,26) 0.640 0.739 0.442 (9,09) (11,63) (16,76) 0.962 1.165 (23,83) 0.938 (28,99) 1.141 (24,43) (29,59) (19,32)(18,78) 0.020 (0,51) TERMINALS 0.080 (2,03) 0.064 (1,63) (7,80) 0.307 (10,31) 0.406 (12,58) 0.495 (12,58) 0.495 (21,6) 0.850 (26,6) 1.047 0.045 (1,14) 0.045 (1,14) 0.035 (0,89) 0.035 (0,89) 0.010 (0,25) 121314151618 17 432 0.020 (0,51) 0.010 (0,25) 12826 27 B SQ A SQ 0.055 (1,40) 0.045 (1,14) 0.028 (0,71) 0.022 (0,54) 0.050 (1,27) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. This package can be hermetically sealed with a metal lid. D. The terminals are gold plated. E. Falls within JEDEC MS-004

MPDI001A – JANUARY 1995 – REVISED JUNE 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 P (R-PDIP-T8) PLASTIC DUAL-IN-LINE 0.015 (0,38) Gage Plane 0.325 (8,26) 0.300 (7,62) 0.010 (0,25) NOM MAX 0.430 (10,92) 4040082/D 05/98 0.200 (5,08) MAX 0.125 (3,18) MIN 0.355 (9,02) 0.020 (0,51) MIN 0.070 (1,78) MAX 0.240 (6,10) 0.260 (6,60) 0.400 (10,60) 0.015 (0,38) 0.021 (0,53) Seating Plane M0.010 (0,25) 0.100 (2,54) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm

MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 KTE (R-PSFM-G3) PowerFLEX  PLASTIC FLANGE-MOUNT 0.360 (9,14) 0.350 (8,89) 0.080 (2,03) 0.070 (1,78) 0.010 (0,25) NOM 0.040 (1,02) Seating Plane 0.050 (1,27) 0.001 (0,03) 0.005 (0,13) 0.010 (0,25) NOM Gage Plane 0.010 (0,25) 0.031 (0,79) 0.041 (1,04) 4073375/F 12/00 NOM 0.350 (8,89) 0.220 (5,59) 0.360 (9,14) 0.295 (7,49) NOM 0.320 (8,13) 0.310 (7,87) 0.025 (0,63) 0.031 (0,79) Thermal Tab (See Note C) 0.004 (0,10) 3°–6° 0.410 (10,41) 0.420 (10,67) 0.200 (5,08) 0.365 (9,27) 0.375 (9,52) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. The center lead is in electrical contact with the thermal tab. D. Dimensions do not include mold protrusions, not to exceed 0.006 (0,15). E. Falls within JEDEC MO-169 PowerFLEX is a trademark of Texas Instruments.

MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 4040001-2/C 10/01 STRAIGHT LEAD OPTION 0.016 (0,41) 0.014 (0,35) 0.157 (4,00) MAX FORMED LEAD OPTION 0.104 (2,65) 0.210 (5,34) 0.170 (4,32) 0.050 (1,27) 0.016 (0,41) 0.022 (0,56) 0.500 (12,70) MIN Seating Plane 0.175 (4,44) 0.125 (3,17)DIA D C 0.105 (2,67) 0.095 (2,41) 0.135 (3,43) MIN 0.080 (2,03) 0.055 (1,40) 0.045 (1,14) 0.105 (2,67) 0.080 (2,03) 0.105 (2,67) NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Lead dimensions are not controlled within this area D. FAlls within JEDEC TO -226 Variation AA (TO-226 replaces TO-92) E. Shipping Method: Straight lead option available in bulk pack only. Formed lead option available in tape & reel or ammo pack.

MSOT002A – OCTOBER 1994 – REVISED NOVEMBER 2001

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LP (O-PBCY-W3) PLASTIC CYLINDRICAL PACKAGE 4040001-3/C 10/01 0.094 (2,40) 0.114 (2,90) 0.460 (11,70) 0.539 (13,70) TAPE & REEL 0.335 (8,50) 0.384 (9,75) 0.020 (0,50) MIN 0.217 (5,50) 0.689 (17,50) 0.098 (2,50) 0.433 (11,00) 0.335 (8,50) 0.610 (15,50) 0.650 (16,50) 1.260 (32,00) 0.905 (23,00) 0.234 (5,95) 0.266 (6,75) 0.512 (13,00) 0.488 (12,40) 0.114 (2,90) 0.169 (4,30)DIA NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Tape and Reel information for the Format Lead Option package.

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Cu stomers should obtain the latest relevant information before placing orders and should verify that such info rmation is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by governm ent requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI component s. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implie d, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are us ed. Information published by TI regarding third-party products or services does not consti tute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the pat ents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, lim itations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements diffe rent from or beyond the parameters stated by TI for that product or service voids all express and any imp lied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.c om Audio www.ti.com/audio Data Converters dataconverter.ti.co m Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 6553 03 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated