7505500 TURCK | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Isolating switching amplifier 2-channel MK1-2AP/24VDC Edition • 2020-01-31T12:10:07+01:00 The isolating switching amplifier MK1-2AP/24VDC is equipped with two intrinsi- cally safe input circuits. Sensors according to EN 60947-5-6 (NAMUR) or potential-free contact makers can be con- nected to the device. The coupler features PNP switching, short-cir- cuit proof transistor outputs. The switching state of the coupler is explained in the block diagram below. The yellow LED indicates the switching status. ■ Output mode NO ■ Short-circuit protected PNP transistor outputs ■ Complete galvanic isolation ■ Input reverse-polarity protected
Isolating switching amplifier 2-channel MK1-2AP/24VDC Edition • 2020-01-31T12:10:07+01:00 Type designation MK1-2AP/24VDC Ident-No. 7505500 Nominal voltage 24 VDC Operating voltage range 19…29 VDC Power consumption ð 0.5 W NAMUR EN-60947-5-6 No-load voltage 8 VDC Short-circuit current 5 mA Input resistance 1 kò Cable resistance ð 50 ò Switch-on threshold 1.55 mA Switch-off threshold 1.75 mA Voltage drop ð 2.5 V Semicondutor output circuit(s) Output circuits (digital) 2 x transistors (pnp, short-circuit proof) Switching voltage ð 29 VDC Switching current per output ð 0.1 A Switching frequency ð 1000 Hz Indication Switching state Yellow Mechanical Data Protection class IP20 Ambient temperature -25…+60 °C Storage temperature -40…+80 °C Relative humidity ð 95 % Dimensions 89 x 18 x 70 mm Weight 70 g Mounting instructions DIN rail (NS35) or panel Housing material Polycarbonate/ABS Electrical connection 4 × 2-pin flat terminals with self-lifting pressure plates Terminal cross-section 1 x 2.5 mm / 2 x 1.5 mm Dimensions