74VCX08

74VCX08_08 FAIRCHILD | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Features

1.2V to 3.6V V CC supply operation 3.6V tolerant inputs and outputs t PD – 2.8ns max. for 3.0V to 3.6V V CC Power-off high impedance inputs and outputs Static Drive (I OH OL – ±24mA @ 3.0V V CC circuitry Latchup performance exceeds 300mA ESD performance: – Human body model 2000V – Machine model 250V Leadless DQFN package General Description The VCX08 contains four 2-input AND gates. This prod- uct is designed for low voltage (1.2V to 3.6V) V CC appli- cations with I/O compatibility up to 3.6V. The VCX08 is fabricated with an advanced CMOS technology to achieve high-speed operation while main- taining low CMOS power dissipation.

Ordering Information

Note: 1. DQFN package available in Tape and Reel only. Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering number. All packages are lead free per JEDEC: J-STD-020B standard. Order Number Package Number Package Description 74VCX08M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74VCX08BQX (1) MLP14A 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm 74VCX08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Uses proprietary Quiet Series™ noise/EMI reduction

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 2 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs Connection Diagrams Pin Assignments for SOIC and TSSOP Pad Assignments for DQFN (Top View) Pin Description Logic Symbol IEEE/IEC Pin Names Description A n , B n Inputs O n Outputs

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 3 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Note: 2. I O Absolute Maximum Rating must be observed. Recommended Operating Conditions (3) The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Note: 3. Floating or unused inputs must be held HIGH or LOW Symbol Parameter Rating V CC Supply Voltage –0.5V to +4.6V V I DC Input Voltage –0.5V to 4.6V V O DC Output Voltage HIGH or LOW State (2) –0.5V to V CC +0.5V V CC = 0V –0.5V to +4.6V I IK DC Input Diode Current, V I 0V –50mA I OK DC Output Diode Current V O 0V –50mA V O V CC +50mA I OH I OL DC Output Source/Sink Current +50mA I CC or GND DC V CC or Gound Current per Supply Pin ±100mA T STG Storage Temperature Range –65°C to +150°C Symbol Parameter Rating V CC Power Supply Operating 1.2V to 3.6V V I Input Voltage –0.3V to 3.6V V O Output Voltage, HIGH or LOW State 0V to V CC I OH I OL Output Current V CC 3.0V to 3.6V ±24mA V CC 2.3V to 2.7V ±18mA V CC 1.65V to 2.3V ±6mA V CC 1.4V to 1.6V ±2mA V CC 1.2V ±100µA T A Free Air Operating Temperature –40°C to +85°C t V Minimum Input Edge Rate, V IN 0.8V to 2.0V, V CC 3.0V 10ns/V

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 4 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs Symbol Parameter V CC (V) Conditions Min Max Units V IH HIGH Level Input Voltage 2.7–3.6 2.0 V 2.3–2.7 1.6 1.65–2.3 0.65 V CC 1.4–1.6 0.65 V CC 1.2 0.65 V CC V IL LOW Level Input Voltage 2.7–3.6 0.8 V 2.3–2.7 0.7 1.65–2.3 0.35 V CC 1.4–1.6 0.35 V CC 1.2 0.05 x V CC V OH HIGH Level Output Voltage 2.7–3.6 I OH –100µA V CC – 0.2 V 2.7 I OH –12mA 2.2 3.0 I OH –18mA 2.4 3.0 I OH –24mA 2.2 2.3–2.7 I OH –100µA V CC – 0.2 2.3 I OH –6mA 2.0 2.3 I OH –12mA 1.8 2.3 I OH –18mA 1.7 1.65–2.3 I OH –100µA V CC – 0.2 1.65 I OH –6mA 1.25 1.4–1.6 I OH –100µA V CC – 0.2 1.4 I OH –2mA 1.05 1.2 I OH = –100µA V CC – 0.2 VOL LOW Level Output Voltage 2.7–3.6 I OL = 100µA 0.2 V 2.7 I OL = 12mA 0.4 3.0 I OL = 18mA 0.4 3.0 I OL = 24mA 0.55 2.3–2.7 I OL = 100µA 0.2 2.3 I OL = 12mA 0.4 2.3 I OL = 18mA 0.6 1.65–2.3 I OL = 100µA 0.2 1.65 I OL = 6mA 0.2 1.4–1.6 I OL = 100µA 0.2 1.4 I OL = 2mA 0.35 1.2 I OL = 100µA 0.05 II Input Leakage Current 1.2–3.6 0 ≤ VI ≤ 3.6V ±5.0 µA IOFF Power-OFF Leakage Current 0 0 ≤ (VI, VO) ≤ 3.6V 10 µA ICC Quiescent Supply Current 1.2–3.6 V I = VCC or GND 20 µA VCC ≤ VI ≤ 3.6V ±20 ∆ICC Increase in ICC per Input 2.7–3.6 V IH = VCC –0.6V 750 µA

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 5 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs Note: 4. For CL = 50pF, add approximately 300ps to the AC Maximum specification. 5. Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (t OSHL) or LOW-to-HIGH (tOSLH). Dynamic Switching Characteristics Capacitance Symbol Parameter V CC (V) Conditions TA = –40°C to +85°C Units Figure NumberMin. Max. 1.8 ± 0.15 1.0 7.4 Fig. 41.2 1.5 37.0 tOSHL, tOSLH Output to Output Skew(5) 3.3 ± 0.3 C L = 30pF , RL = 500Ω 0.5 ns 2.5 ± 0.2 0.5 1.8 ± 0.15 0.75 1.5 ± 0.1 C L = 15pF , RL = 2kΩ 1.5 1.2 1.5 Symbol Parameter V CC (V) Conditions TA = 25°C UnitTypical VOLP Quiet Output Dynamic Peak VOL 1.8 C L = 30pF , VIH = VCC, VIL = 0V 0.25 V 2.5 0.6 3.3 0.8 V OLV Quiet Output Dynamic Valley VOL 1.8 C L = 30pF , VIH = VCC, VIL = 0V –0.25 V 2.5 –0.6 3.3 –0.8 V OHV Quiet Output Dynamic Valley VOH 1.8 C L = 30pF , VIH = VCC, VIL = 0V 1.5 V 2.5 1.9 3.3 2.2 Symbol Parameter Conditions TA = +25°C UnitsTypical CIN Input Capacitance V I = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V 6.0 pF COUT Output Capacitance V I = 0V or VCC, VCC = 1.8V, 2.5V or 3.3V 7.0 pF CPD Power Dissipation Capacitance VI = 0V or VCC, f = 10MHz, VCC = 1.8V, 2.5V or 3.3V 20.0 pF

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 8 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs Tape and Reel Specification Tape Format for DQFN Tape Dimensions inches (millimeters) Reel Dimensions inches (millimeters) Package Designator Tape Section Number of Cavities Cavity Status Cover Tape Status BQX Leader (Start End) 125 (Typ.) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typ.) Empty Sealed Tape Size A B C D N W1 W2

Figure 5. 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow specifically the warranty therein, which covers Fairchild products. B) ALL DIMENSIONS ARE IN MILLIMETERS.

1.75 MAX

Figure 6. 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm specifically the warranty therein, which covers Fairchild products.

Figure 7. 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide specifically the warranty therein, which covers Fairchild products.

0.43 TYP

©1999 Fairchild Semiconductor Corporation www.fairchildsemi.com 74VCX08 Rev. 1.9.0 12 TRADEMARKS Thef ollowing includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. ACEx® Build it Now™ CorePLUS™ CROSSVOLT™ CTL™ Current Transfer Logic™ EcoSPARK EZSWITCH™ * Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore™ FlashWriter®* FPS™ FRFET Global Power Resource SM Green FPS™ Green FPS™e-Series™ GTO™ i-Lo™ IntelliMAX™ ISOPLANAR™ MegaBuck™ MICROCOUPLER™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP-SPM™ Power220® POWEREDGE® Power-SPM™ PowerTrench® Programmable Active Droop™ QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START™ SPM STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT™ -6 SuperSOT™ -8 SupreMOS™ SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO™ TinyPower™ TinyPWM™ TinyWire™ µSerDes™ UHC Ultra FRFET™ UniFET™ VCX™ *E Z S W ITCH™ and FlashWriter ® are trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHERDOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I33 74VCX08 — Low Voltage Quad 2-Input AND Gate with 3.6V Tolerant Inputs and Outputs