SN54LV04A_07 TI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 16
Technical content
/C0083/C0078/C0053/C0052/C0076/C0086/C0048/C0052/C0065/C0044 /C0083/C0078/C0055/C0052/C0076/C0086/C0048/C0052/C0065 /C0072/C0069/C0088 /C0073/C0078/C0086/C0069/C0082/C0084/C0069/C0082/C0083 SCLS388J − SEPTEMBER 1997 − REVISED APRIL 2005 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C00682-V to 5.5-V VCC Operation /C0068Max tpd of 6.5 ns at 5 V /C0068Latch-Up Performance Exceeds 250 mA Per JESD 17 /C0068Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C /C0068Typical VOHV (Output VOH Undershoot) >2.3 V at VCC = 3.3 V, TA = 25°C /C0068Support Mixed-Mode Voltage Operation on All Ports /C0068Ioff Supports Partial-Power-Down Mode Operation /C0068ESD Protection Exceeds JESD 22 − 2000-V Human-Body Model (A114-A) − 200-V Machine Model (A115-A) − 1000-V Charged-Device Model (C101) GND V CC SN54LV04A ...J O R W PACKAGE SN74LV04A . . . D, DB, DGV, NS, OR PW PACKAGE (TOP VIEW) 321 2 0 1 9 91 01 11 21 3 NC NC NC NC NC V GND NC SN54LV04A . . . FK PACKAGE (TOP VIEW) CC NC − No internal connection SN74LV04A . . . RGY PACKAGE (TOP VIEW) 11 4 4Y V GND CC description/ordering information These hex inverters are designed for 2-V to 5.5-V VCC operation. The ’LV04A devices contain six independent inverters. These devices perform the Boolean function Y = A. These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down.
ORDERING INFORMATION
TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING QFN − RGY Reel of 1000 SN74LV04ARGYR LV04A SOIC − D Tube of 50 SN74LV04AD LV04ASOIC − D Reel of 2500 SN74LV04ADR LV04A SOP − NS Reel of 2000 SN74LV04ANSR 74LV04A −40°C to 85°C SSOP − DB Reel of 2000 SN74LV04ADBR LV04A−40 C to 85C Tube of 90 SN74LV04APW TSSOP − PW Reel of 2000 SN74LV04APWR LV04ATSSOP − PW Reel of 250 SN74LV04APWT LV04A TVSOP − DGV Reel of 2000 SN74LV04ADGVR LV04A CDIP − J Tube of 25 SNJ54LV04AJ SNJ54LV04AJ −55°C to 125°C CFP − W Tube of 150 SNJ54LV04AW SNJ54LV04AW−55 C to 125C LCCC − FK Tube of 55 SNJ54LV04AFK SNJ54LV04AFK † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Copyright 2005, Texas Instruments Incorporated/C0085/C0078/C0076/C0069/C0083/C0083 /C0079/C0084/C0072/C0069/C0082/C0087/C0073/C0083/C0069 /C0078/C0079/C0084/C0069/C0068 /C0116/C0104/C0105/C0115 /C0100/C0111/C0099/C0117/C0109/C0101/C0110/C0116 /C0099/C0111/C0110/C0116/C0097/C0105/C0110/C0115 /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
/C0083/C0078/C0053/C0052/C0076/C0086/C0048/C0052/C0065/C0044 /C0083/C0078/C0055/C0052/C0076/C0086/C0048/C0052/C0065 /C0072/C0069/C0088 /C0073/C0078/C0086/C0069/C0082/C0084/C0069/C0082/C0083 SCLS388J − SEPTEMBER 1997 − REVISED APRIL 2005
2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
(each inverter) INPUT A OUTPUT Y H L L H logic diagram, each inverter (positive logic) YA absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Voltage range applied to any output in the high-impedance † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. The input and output negative-voltage ratings may be exceeded if the input and output current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The package thermal impedance is calculated in accordance with JESD 51-7. 4. The package thermal impedance is calculated in accordance with JESD 51-5.
/C0083/C0078/C0053/C0052/C0076/C0086/C0048/C0052/C0065/C0044 /C0083/C0078/C0055/C0052/C0076/C0086/C0048/C0052/C0065 /C0072/C0069/C0088 /C0073/C0078/C0086/C0069/C0082/C0084/C0069/C0082/C0083 SCLS388J − SEPTEMBER 1997 − REVISED APRIL 2005 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions (see Note 5) SN54LV04A SN74LV04A UNITMIN MAX MIN MAX UNIT VCC Supply voltage 2 5.5 2 5.5 V VCC = 2 V 1.5 1.5 VIH High-level input voltage VCC = 2.3 V to 2.7 V VCC × 0.7 VCC × 0.7 VVIH High-level input voltage VCC = 3 V to 3.6 V VCC × 0.7 VCC × 0.7 V VCC = 4.5 V to 5.5 V VCC × 0.7 VCC × 0.7 VCC = 2 V 0.5 0.5 VIL Low-level input voltage VCC = 2.3 V to 2.7 V VCC × 0.3 VCC × 0.3 VVIL Low-level input voltage VCC = 3 V to 3.6 V VCC × 0.3 VCC × 0.3 V VCC = 4.5 V to 5.5 V VCC × 0.3 VCC × 0.3 VI Input voltage 0 5.5 0 5.5 V VO Output voltage 0 VCC 0 VCC V VCC = 2 V −50 −50 µA IOH High-level output current VCC = 2.3 V to 2.7 V −2 −2 IOH High-level output current VCC = 3 V to 3.6 V −6 −6 mA VCC = 4.5 V to 5.5 V −12 −12 mA VCC = 2 V 50 50 µA IOL Low-level output current VCC = 2.3 V to 2.7 V 2 2 IOL Low-level output current VCC = 3 V to 3.6 V 6 6 mA VCC = 4.5 V to 5.5 V 12 12 mA VCC = 2.3 V to 2.7 V 200 200 ∆t/∆v Input transition rise or fall rateVCC = 3 V to 3.6 V 100 100 ns/V∆t/∆v Input transition rise or fall rate VCC = 4.5 V to 5.5 V 20 20 ns/V TA Operating free-air temperature −55 125 −40 85 °C NOTE 5: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS VCC SN54LV04A SN74LV04A UNITPARAMETER TEST CONDITIONS VCC MIN TYP MAX MIN TYP MAX UNIT IOH = −50 µA 2 V to 5.5 VVCC −0.1 VCC −0.1 VOH IOH = −2 mA 2.3 V 2 2 VVOH IOH = −6 mA 3 V 2.48 2.48 V IOH = −12 mA 4.5 V 3.8 3.8 IOL = 50 µA 2 V to 5.5 V 0.1 0.1 VOL IOL = 2 mA 2.3 V 0.4 0.4 VVOL IOL = 6 mA 3 V 0.44 0.44 V IOL = 12 mA 4.5 V 0.55 0.55 II VI = 5.5 V or GND 0 to 5.5 V ±1 ±1 µA ICC VI = VCC or GND, IO = 0 5.5 V 20 20 µA Ioff VI or VO = 0 to 5.5 V 0 5 5 µA C i VI = VCC or GND 3.3 V 2.3 2.3 pFC i VI = VCC or GND 5 V 2.3 2.3 pF /C0080/C0082/C0079/C0068/C0085/C0067/C0084 /C0080/C0082/C0069/C0086/C0073/C0069/C0087 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0111/C0110/C0099/C0101/C0114/C0110/C0115 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0118/C0101 /C0111/C0114 /C0100/C0101/C0115/C0105/C0103/C0110 /C0112/C0104/C0097/C0115/C0101 /C0111/C0102 /C0100/C0101/C0118/C0101/C0108/C0111/C0112/C0109/C0101/C0110/C0116/C0046 /C0067/C0104/C0097/C0114/C0097/C0099/C0116/C0101/C0114/C0105/C0115/C0116/C0105/C0099 /C0100/C0097/C0116/C0097 /C0097/C0110/C0100 /C0111/C0116/C0104/C0101/C0114 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0097/C0114/C0101 /C0100/C0101/C0115/C0105/C0103/C0110 /C0103/C0111/C0097/C0108/C0115/C0046 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0114/C0101/C0115/C0101/C0114/C0118/C0101/C0115 /C0116/C0104/C0101 /C0114/C0105/C0103/C0104/C0116 /C0116/C0111 /C0099/C0104/C0097/C0110/C0103/C0101 /C0111/C0114 /C0100/C0105/C0115/C0099/C0111/C0110/C0116/C0105/C0110/C0117/C0101 /C0116/C0104/C0101/C0115/C0101 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0119/C0105/C0116/C0104/C0111/C0117/C0116 /C0110/C0111/C0116/C0105/C0099/C0101/C0046
/C0083/C0078/C0053/C0052/C0076/C0086/C0048/C0052/C0065/C0044 /C0083/C0078/C0055/C0052/C0076/C0086/C0048/C0052/C0065 /C0072/C0069/C0088 /C0073/C0078/C0086/C0069/C0082/C0084/C0069/C0082/C0083 SCLS388J − SEPTEMBER 1997 − REVISED APRIL 2005
4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
switching characteristics over recommended operating free-air temperature range, VCC = 2.5 V ± 0.2 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO LOAD TA = 25°C SN54LV04A SN74LV04A UNITPARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE MIN TYP MAX MIN MAX MIN MAX UNIT tpd A Y C L = 15 pF 7.1* 11.7* 1* 14* 1 14 nstpd A Y C L = 50 pF 10 15.5 1 18 1 18 ns * On products compliant to MIL-PRF-38535, this parameter is not production tested. switching characteristics over recommended operating free-air temperature range, VCC = 3.3 V ± 0.3 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO LOAD TA = 25°C SN54LV04A SN74LV04A UNITPARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE MIN TYP MAX MIN MAX MIN MAX UNIT tpd A Y nstpd A Y C L = 50 pF 7.3 10.6 1 12 1 12 ns * On products compliant to MIL-PRF-38535, this parameter is not production tested. switching characteristics over recommended operating free-air temperature range, VCC = 5 V ± 0.5 V (unless otherwise noted) (see Figure 1) PARAMETER FROM TO LOAD TA = 25°C SN54LV04A SN74LV04A UNITPARAMETER FROM (INPUT) TO (OUTPUT) LOAD CAPACITANCE MIN TYP MAX MIN MAX MIN MAX UNIT tpd A Y nstpd A Y C L = 50 pF 5.1 7.5 1 8.5 1 8.5 ns * On products compliant to MIL-PRF-38535, this parameter is not production tested. noise characteristics, VCC = 3.3 V, CL = 50 pF, TA = 25°C (see Note 6) PARAMETER SN74LV04A UNITPARAMETER MIN TYP MAX UNIT VOL(P) Quiet output, maximum dynamic VOL 0.3 0.8 V VOL(V) Quiet output, minimum dynamic VOL −0.1 −0.8 V VOH(V) Quiet output, minimum dynamic VOH 3.1 V VIH(D) High-level dynamic input voltage 2.31 V VIL(D) Low-level dynamic input voltage 0.99 V NOTE 6: Characteristics are for surface-mount packages only. operating characteristics, TA = 25°C PARAMETER TEST CONDITIONS VCC TYP UNIT C pd Power dissipation capacitance C L = 50 pF, f = 10 MHz 3.3 V 9.6 pFC pd Power dissipation capacitance C L = 50 pF, f = 10 MHz 5 V 11.4 pF /C0080/C0082/C0079/C0068/C0085/C0067/C0084 /C0080/C0082/C0069/C0086/C0073/C0069/C0087 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0099/C0111/C0110/C0099/C0101/C0114/C0110/C0115 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0105/C0110 /C0116/C0104/C0101 /C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0118/C0101 /C0111/C0114 /C0100/C0101/C0115/C0105/C0103/C0110 /C0112/C0104/C0097/C0115/C0101 /C0111/C0102 /C0100/C0101/C0118/C0101/C0108/C0111/C0112/C0109/C0101/C0110/C0116/C0046 /C0067/C0104/C0097/C0114/C0097/C0099/C0116/C0101/C0114/C0105/C0115/C0116/C0105/C0099 /C0100/C0097/C0116/C0097 /C0097/C0110/C0100 /C0111/C0116/C0104/C0101/C0114 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0097/C0114/C0101 /C0100/C0101/C0115/C0105/C0103/C0110 /C0103/C0111/C0097/C0108/C0115/C0046 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0114/C0101/C0115/C0101/C0114/C0118/C0101/C0115 /C0116/C0104/C0101 /C0114/C0105/C0103/C0104/C0116 /C0116/C0111 /C0099/C0104/C0097/C0110/C0103/C0101 /C0111/C0114 /C0100/C0105/C0115/C0099/C0111/C0110/C0116/C0105/C0110/C0117/C0101 /C0116/C0104/C0101/C0115/C0101 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0119/C0105/C0116/C0104/C0111/C0117/C0116 /C0110/C0111/C0116/C0105/C0099/C0101/C0046
NOTES: A. C L includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO = 50 Ω, tr ≤ 3 ns, tf ≤ 3 ns. D. The outputs are measured one at a time, with one input transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPHL and tPLH are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 1. Load Circuit and Voltage Waveforms
Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) SN74LV04AD ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI SN74LV04ADBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADGVR ACTIVE TVSOP DGV 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADGVRE4 ACTIVE TVSOP DGV 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ANSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ANSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ANSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APW ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWE4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWG4 ACTIVE TSSOP PW 14 90 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI SN74LV04APWR ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWT ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04APWTE4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LV04ARGYR ACTIVE QFN RGY 14 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR SN74LV04ARGYRG4 ACTIVE QFN RGY 14 1000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1YEAR PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 1
(1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 6-Dec-2006 Addendum-Page 2
MPDS006C – FEBRUARY 1996 – REVISED AUGUST 2000 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DGV (R-PDSO-G**) PLASTIC SMALL-OUTLINE
24 PINS SHOWN
3,70 3,50 4,90 5,10 20DIM PINS ** 4073251/E 08/00 1,20 MAX Seating Plane 0,05 0,15 0,25 0,50 0,75 0,23 0,13 11 2 24 13 4,30 4,50 0,16 NOM Gage Plane A 7,90 7,70 382416 4,90 5,103,70 3,50 A MAX A MIN 6,60 6,20 11,20 11,40 9,60 9,80 0,08 M0,070,40 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion, not to exceed 0,15 per side. D. Falls within JEDEC: 24/48 Pins – MO-153 14/16/20/56 Pins – MO-194
MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01
28 PINS SHOWN
8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 PW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,65 M0,10 0,10 0,25 0,50 0,75 0,15 NOM Gage Plane 9,80 9,60 7,90 7,70 2016 6,60 6,40 4040064/F 01/97 0,30 6,60 6,20 0,19 4,30 4,50 0,15 A 1,20 MAX 5,10 4,90 3,10 2,90 A MAX A MIN DIM PINS ** 0,05 4,90 5,10 Seating Plane 0°–8° NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-153
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Cu stomers should obtain the latest relevant information before placing orders and should verify that such info rmation is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by governm ent requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI component s. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implie d, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are us ed. Information published by TI regarding third-party products or services does not consti tute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the pat ents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, lim itations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements diffe rent from or beyond the parameters stated by TI for that product or service voids all express and any imp lied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.c om Audio www.ti.com/audio Data Converters dataconverter.ti.co m Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 6553 03 Dallas, Texas 75265 Copyright © 2007, Texas Instruments Incorporated