DM74LS367A FAIRCHILD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
© 2000 Fairchild Semiconductor Corporation DS006429 www.fairchildsemi.com August 1986 Revised March 2000 DM74LS367A Hex 3-STATE Buffer/Bus Driver DM74LS367A Hex 3-STATE Buffer/Bus Driver General Description This device contains six independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned OFF presenting a high-imped- ance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possi- bility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs. Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Function Table Y = A H = HIGH Logic Level L = LOW Logic Level X = Either LOW or HIGH Logic Level Hi-Z = 3-STATE (Outputs are disabled) Order Number Package Number Package Description DM74LS367AM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow DM74LS367AN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Inputs Output AG Y LL L HL H X H Hi-Z
www.fairchildsemi.com 2 DM74LS367A Absolute Maximum Ratings(Note 1) Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.Recommended Operating Conditions
Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted) Note 2: All typicals are at VCC = 5V, TA = 25°C. Note 3: Not more than one output should be shorted at a time, and the duration should not exceed one second. Note 4: ICC is measured with the DATA inputs grounded and the OUTPUT CONTROLS at 4.5V. Note 5: Both G inputs are at 2V. Note 6: Both G inputs at 0.4V. Switching Characteristics at VCC = 5V and TA = 25°C Note 7: C L = 5 pF. Supply Voltage 7V Input Voltage 7V Operating Free Air Temperature Range 0°C to +70°C Storage Temperature Range −65°C to +150°C Symbol Parameter Min Nom Max Units V CC Supply Voltage 4.75 5 5.25 V VIH HIGH Level Input Voltage 2 V VIL LOW Level Input Voltage 0.8 V IOH HIGH Level Output Current −2.6 mA IOL LOW Level Output Current 24 mA TA Free Air Operating Temperature 0 70 °C Symbol Parameter Conditions Min Typ Max Units (Note 2) VI Input Clamp Voltage V CC = Min, II = −18 mA −1.5 V VOH HIGH Level V CC = Min, IOH = Max 2.4 3.4 V Output Voltage V IL = Max, VIH = Min VOL LOW Level V CC = Min, IOL = Max 0.35 0.5 Output Voltage V IL = Max, VIH = Min V IOL = 12 mA, VCC = Min 0.25 0.4 II Input Current @ Max Input Voltage VCC = Max, VI = 7V 0.1 mA IIH HIGH Level Input Current V CC = Max, VI = 2.7V 20 µA IIL LOW Level V CC = Max, VI = 0.5V (Note 5) A Input −20 µA Input Current V CC = Max, VI = 0.4V (Note 6) A Input −0.4 mA VCC = Max, VI = 0.4V G Input −0.4 IOZH Off-State Output Current with VCC = Max, VO = 2.4V 20 µA HIGH Level Output Voltage Applied VIH = Min, VIL = Max IOZL Off-State Output Current with VCC = Max, VO = 0.4V −20 µA LOW Level Output Voltage Applied VIH = Min, VIL = Max IOS Short Circuit Output Current V CC = Max (Note 3) −20 −100 mA ICC Supply Current V CC = Max (Note 4) 14 24 mA R L = 667Ω Symbol Parameter C L = 50 pF C L = 150 pF Units Min Max Min Max tPLH Propagation Delay Time LOW-to-HIGH Level Output 16 25 ns tPHL Propagation Delay Time HIGH-to-LOW Level Output 16 25 ns tPZH Output Enable Time to HIGH Level Output 30 40 ns tPZL Output Enable Time to LOW Level Output 30 40 ns tPHZ Output Disable Time from HIGH Level Output (Note 7) 20 ns tPLZ Output Disable Time from LOW Level Output (Note 7) 20 ns
3 www.fairchildsemi.com DM74LS367A Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A
www.fairchildsemi.com 4 DM74LS367A Hex 3-STATE Buffer/Bus Driver Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com