74LS07

SN54LS07 TI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 11

Technical content

The SN54LS07 and SN74LS17 are obsolete and are no longer supplied. /C0083/C0078/C0053/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0049/C0055 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083/C0047/C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0079/C0080/C0069/C0078/C0262/C0067/C0079/C0076/C0076/C0069/C0067/C0084/C0079/C0082 /C0072/C0073/C0071/C0072/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SDLS021C − MAY 1990 − REVISED FEBRUARY 2004 1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 /C0068Convert TTL Voltage Levels to MOS Levels /C0068High Sink-Current Capability /C0068Input Clamping Diodes Simplify System Design /C0068Open-Collector Driver for Indicator Lamps and Relays description/ordering information These hex buffers/drivers feature high-voltage open-collector outputs to interface with high-level circuits or for driving high-current loads. They are also characterized for use as buffers for driving TTL inputs. The ’LS07 devices have a rated output voltage of 30 V, and the SN74LS17 has a rated output voltage of 15 V. The maximum sink current is 30 mA for the SN54LS07 and 40 mA for the SN74LS07 and SN74LS17. These circuits are compatible with most TTL families. Inputs are diode-clamped to minimize transmission-line effects, which simplifies design. Typical power dissipation is 140 mW, and average propagation delay time is 12 ns.

ORDERING INFORMATION

TA PACKAGE † ORDERABLE PART NUMBER TOP-SIDE MARKING PDIP − N Tube SN74LS07N SN74LS07N SOIC − D Tube SN74LS07D LS07 0°C to 70°C SOIC − D Tape and reel SN74LS07DR LS07

0 C to 70C

SOP − NS Tape and reel SN74LS07NSR 74LS07 SSOP − DB Tape and reel SN74LS07DBR LS07 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. logic diagram (positive logic) Copyright  2004, Texas Instruments Incorporated Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. GND V CC SN54LS07 ...J PACKAGE SN74LS07, SN74LS17 . . . D, DB, N, OR NS PACKAGE (TOP VIEW) /C0080/C0082/C0079/C0068/C0085/C0067/C0084/C0073/C0079/C0078 /C0068/C0065/C0084/C0065 /C0105/C0110/C0102/C0111/C0114/C0109/C0097/C0116/C0105/C0111/C0110 /C0105/C0115 /C0099/C0117/C0114/C0114/C0101/C0110/C0116 /C0097/C0115 /C0111/C0102 /C0112/C0117/C0098/C0108/C0105/C0099/C0097/C0116/C0105/C0111/C0110 /C0100/C0097/C0116/C0101/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0110/C0102/C0111/C0114/C0109 /C0116/C0111 /C0115/C0112/C0101/C0099/C0105/C0102/C0105/C0099/C0097/C0116/C0105/C0111/C0110/C0115 /C0112/C0101/C0114 /C0116/C0104/C0101 /C0116/C0101/C0114/C0109/C0115 /C0111/C0102 /C0084/C0101/C0120/C0097/C0115 /C0073/C0110/C0115/C0116/C0114/C0117/C0109/C0101/C0110/C0116/C0115 /C0115/C0116/C0097/C0110/C0100/C0097/C0114/C0100 /C0119/C0097/C0114/C0114/C0097/C0110/C0116/C0121/C0046 /C0080/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046 /C0079/C0110 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115 /C0099/C0111/C0109/C0112/C0108/C0105/C0097/C0110/C0116 /C0116/C0111 /C0077/C0073/C0076/C0262/C0080/C0082/C0070/C0262/C0051/C0056/C0053/C0051/C0053/C0044 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115 /C0097/C0114/C0101 /C0116/C0101/C0115/C0116/C0101/C0100 /C0117/C0110/C0108/C0101/C0115/C0115 /C0111/C0116/C0104/C0101/C0114/C0119/C0105/C0115/C0101 /C0110/C0111/C0116/C0101/C0100/C0046 /C0079/C0110 /C0097/C0108/C0108 /C0111/C0116/C0104/C0101/C0114 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0115/C0044 /C0112/C0114/C0111/C0100/C0117/C0099/C0116/C0105/C0111/C0110 /C0112/C0114/C0111/C0099/C0101/C0115/C0115/C0105/C0110/C0103 /C0100/C0111/C0101/C0115 /C0110/C0111/C0116 /C0110/C0101/C0099/C0101/C0115/C0115/C0097/C0114/C0105/C0108/C0121 /C0105/C0110/C0099/C0108/C0117/C0100/C0101 /C0116/C0101/C0115/C0116/C0105/C0110/C0103 /C0111/C0102 /C0097/C0108/C0108 /C0112/C0097/C0114/C0097/C0109/C0101/C0116/C0101/C0114/C0115/C0046

The SN54LS07 and SN74LS17 are obsolete and are no longer supplied. /C0083/C0078/C0053/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0049/C0055 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083/C0047/C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0079/C0080/C0069/C0078/C0262/C0067/C0079/C0076/C0076/C0069/C0067/C0084/C0079/C0082 /C0072/C0073/C0071/C0072/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SDLS021C − MAY 1990 − REVISED FEBRUARY 2004

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

schematic (each gate) Input VCC Output GND 9 kΩ 1 kΩ 2 kΩ 2 kΩ 5 kΩ Resistor values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values are with respect to GND. 2. This is the maximum voltage that should be applied to any output when it is in the off state. 3. The package thermal impedance is calculated in accordance with JESD 51-7.

The SN54LS07 and SN74LS17 are obsolete and are no longer supplied. /C0083/C0078/C0053/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0048/C0055/C0044 /C0083/C0078/C0055/C0052/C0076/C0083/C0049/C0055 /C0072/C0069/C0088 /C0066/C0085/C0070/C0070/C0069/C0082/C0083/C0047/C0068/C0082/C0073/C0086/C0069/C0082/C0083 /C0087/C0073/C0084/C0072 /C0079/C0080/C0069/C0078/C0262/C0067/C0079/C0076/C0076/C0069/C0067/C0084/C0079/C0082 /C0072/C0073/C0071/C0072/C0262/C0086/C0079/C0076/C0084/C0065/C0071/C0069 /C0079/C0085/C0084/C0080/C0085/C0084/C0083 SDLS021C − MAY 1990 − REVISED FEBRUARY 2004 3POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 recommended operating conditions (see Note 4) SN54LS07 SN74LS07SN54LS07 SN74LS07 SN74LS17 UNIT MIN NOM MAX MIN NOM MAX UNIT VCC Supply voltage 4.5 5 5.5 4.75 5 5.25 V VIH High-level input voltage 2 2 V VIL Low-level input voltage 0.8 0.8 V VOH High-level output voltage ’LS07 30 30 VVOH High-level output voltage SN74LS17 15 V IOL Low-level output current 30 40 mA TA Operating free-air temperature −55 125 0 70 °C NOTE 4: All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS ‡ SN54LS07 SN74LS07 SN74LS17 UNITPARAMETER TEST CONDITIONS ‡ MIN MAX MIN MAX UNIT VIK VCC = MIN, II = −12 mA −1.5 −1.5 V IOH VCC = MIN, VIH = 2 V ’LS07, VOH = 30 V 0.25 0.25 mAIOH VCC = MIN, VIH = 2 V SN74LS17, VOH = 15 V 0.25 mA VOL VCC = MIN, VIL = 0.8 V IOL = 16 mA 0.4 0.4 VVOL VCC = MIN, VIL = 0.8 V IOL = MAX§ 0.7 0.7 V II VCC = MAX, VI = 7 V 1 1 mA IIH VCC = MAX, VI = 2.4 V 20 20 µA IIL VCC = MAX, VI = 0.4 V −0.2 −0.2 mA ICCH VCC = MAX 14 14 mA ICCL VCC = MAX 45 45 mA ‡ For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions. § IOL = 30 mA for SN54 series parts and 40 mA for SN74 series parts. switching characteristics, VCC = 5 V, TA = 25°C (see Figure 1) PARAMETER FROM TO TEST CONDITIONS MIN TYP MAX UNITPARAMETER FROM (INPUT) TO (OUTPUT) TEST CONDITIONS MIN TYP MAX UNIT tPLH A Y R L = 110 Ω, C L = 15 pF 6 10 ns tPHL A Y R L = 110 Ω, C L = 15 pF 19 30 ns

obsolete and are no longer supplied.

4 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

NOTES: A. C L includes probe and jig capacitance. B. All diodes are 1N3064 or equivalent. C. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. D. S1 and S2 are closed for tPLH , tPHL , tPHZ , and tPLZ ; S1 is open and S2 is closed for tPZH ; S1 is closed and S2 is open for tPZL . E. Phase relationships between inputs and outputs have been chosen arbitrarily for these examples. F. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω, tr ≤ 1.5 ns, tf ≤ 2.6 ns. G. The outputs are measured one at a time, with one input transition per measurement. Figure 1. Load Circuits and Voltage Waveforms

Orderable Device Status(1) Package Type Package Drawing Pins Package Qty Eco Plan(2) Lead/Ball FinishMSL Peak Temp (3) SN74LS07D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI SN74LS07DBR ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DBRG4 ACTIVE SSOP DB 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DE4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07DRE4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07N ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74LS07NE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74LS07NSR ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07NSRE4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS07NSRG4 ACTIVE SO NS 14 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LS17D OBSOLETE SOIC D 14 TBD Call TI Call TI SN74LS17N OBSOLETE PDIP N 14 TBD Call TI Call TI (1)The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2)Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontentfor the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS):TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br):TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the PACKAGE OPTION ADDENDUM www.ti.com 24-Apr-2006 Addendum-Page 1

accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. PACKAGE OPTION ADDENDUM www.ti.com 24-Apr-2006 Addendum-Page 2

MSSO002E – JANUARY 1995 – REVISED DECEMBER 2001 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 4040065 /E 12/01

28 PINS SHOWN

8,20 7,40 0,55 0,95 0,25 12,90 12,30 10,50 8,50 Seating Plane 9,907,90 10,50 9,90 0,38 5,60 5,00 0,22 A 2016 6,506,50 0,05 MIN 5,905,90 DIM A MAX A MIN PINS ** 2,00 MAX 6,90 7,50 0,65 M0,15 0°–/C02578° 0,10 0,09 0,25 NOTES: A. All linear dimensions are in millimeters. B. This drawing is subject to change without notice. C. Body dimensions do not include mold flash or protrusion not to exceed 0,15. D. Falls within JEDEC MO-150

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Amplifiers amplifier.ti.com Audio www.ti.com/audio Data Converters dataconverter.ti.com Automotive www.ti.com/automotive DSP dsp.ti.com Broadband www.ti.com/broadband Interface interface.ti.com Digital Control www.ti.com/digitalcontrol Logic logic.ti.com Military www.ti.com/military Power Mgmt power.ti.com Optical Networking www.ti.com/opticalnetwork Microcontrollers microcontroller.ti.com Security www.ti.com/security Low Power Wireless www.ti.com/lpw Telephony www.ti.com/telephony Video & Imaging www.ti.com/video Wireless www.ti.com/wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright  2006, Texas Instruments Incorporated