74LCX08 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

I 2.3V–3.6V VCC specifications provided I 5.5 ns tPD max (VCC /c32 3.3V), 10 /c80 A ICC max I Power down high impedance inputs and outputs I /c114 24 mA output drive (VCC /c32 3.0V) I Implements patented noise/EMI reduction circuitry I Latch-up performance exceeds JEDEC 78 conditions I ESD performance: Human body model /c33 2000V Machine model /c33 150V I Leadless Pb-Free DQFN package Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL ” indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. Note 2: DQFN package available in Tape and Reel only. Order Number Package Number Package Description 74LCX08M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LCX08MX_NL (Note 1) M14A Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow 74LCX08SJ M14D Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74LCX08BQX (Note 2) MLP014A Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm 74LCX08MTC MTC14 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 74LCX08MTCX_NL (Note 1) MTC14 Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

www.fairchildsemi.com 2 74LCX08 Logic Symbol IEEE/IEC Pin Descriptions Connection Diagrams Pin Assignments for SOIC, SOP, and TSSOP Pad Assignments for DQFN (Top View) Pin Names Description An, Bn Inputs O n Outputs

3 www.fairchildsemi.com 74LCX08 Absolute Maximum Ratings(Note 3) Recommended Operating Conditions (Note 5) Note 3: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recom- mended Operating Conditions” table will define the conditions for actual device operation. Note 4: IO Absolute Maximum Rating must be observed. Note 5: Unused inputs must be held HIGH or LOW. They may not float. Symbol Parameter Value Conditions Units VCC Supply Voltage /c16 0.5 to /c14 7.0 V VI DC Input Voltage /c16 0.5 to /c14 7.0 V VO DC Output Voltage /c16 0.5 to VCC /c14 0.5 Output in HIGH or LOW State (Note 4) V IIK DC Input Diode Current /c16 50 V I /c31 GND mA IOK DC Output Diode Current /c16 50 V O /c31 GND mA/c14 50 V O /c33 VCC IO DC Output Source/Sink Current /c114 50 mA ICC DC Supply Current per Supply Pin /c114 100 mA IGND DC Ground Current per Ground Pin /c114 100 mA TSTG Storage Temperature /c16 65 to /c14 150 /c113 C Symbol Parameter Min Max Units VCC Supply Voltage Operating 2.0 3.6 VData Retention 1.5 3.6 VI Input Voltage 05 . 5V VO Output Voltage HIGH or LOW State 0 V CC V IOH /IOL Output Current V CC /c32 3.0V /c16 3.6V /c114 24 mAVCC /c32 2.7V /c16 3.0V /c114 12 VCC /c32 2.3V /c16 2.7V /c114 8 TA Free-Air Operating Temperature /c16 40 85 /c113 C /c39 t//c39 V Input Edge Rate, V IN /c32 0.8V–2.0V, VCC /c32 3.0V 0 10 ns/V Symbol Parameter Conditions VCC TA /c32 /c16 40/c113 C to /c14 85/c113 C Units (V) Min Max VIH HIGH Level Input Voltage 2.3 /c16 2.7 1.7 V 2.7 /c16 3.6 2.0 VIL LOW Level Input Voltage 2.3 /c16 2.7 0.7 V 2.3 /c16 3.6 0.8 VOH HIGH Level Output Voltage I OH /c32 /c16 100 /c80 A2 . 3 /c16 3.6 V CC /c16 0.2 V IOH = -8 mA 2.3 1.8 IOH /c32 /c16 12 mA 2.7 2.2 IOH /c32 /c16 18 mA 3.0 2.4 IOH /c32 /c16 24 mA 3.0 2.2 VOL LOW Level Output Voltage I OL /c32 100 /c80 A2 . 3 /c16 3.6 0.2 V IOL = 8mA 2.3 0.6 IOL /c32 12 mA 2.7 0.4 IOL /c32 16 mA 3.0 0.4 IOL /c32 24 mA 3.0 0.55 II Input Leakage Current 0 /c100 VI /c100 5.5V 2.3 /c16 3.6 /c114 5.0 /c80 A IOFF Power-Off Leakage Current V I or VO /c32 5.5V 0 10 /c80 A ICC Quiescent Supply Current V I /c32 VCC or GND 2.3 /c16 3.6 10 /c80 A 3.6V /c100 VI /c100 5.5V 2.3 /c16 3.6 /c114 10 /c39 ICC Increase in ICC per Input V IH /c32 VCC /c16 0.6V 2.3 /c16 3.6 500 /c80 A

www.fairchildsemi.com 4 74LCX08 Note 6: Skew is defined as the absolute value of the difference between the actual propagation delay for any two separate outputs of the same device. The specification applies to any outputs switching in the same direction, either HIGH-to-LOW (tOSHL ) or LOW-to-HIGH (tOSLH ). Dynamic Switching Characteristics Capacitance Symbol Parameter TA /c32 /c16 40/c113 C to /c14 85/c113 C, RL /c32 500/c58 Units C L /c32 50 pF C L /c32 50 pF C L /c32 30 pF Min Max Min Max Min Max ns tOSHL Output to Output Skew (Note 6) 1.0 ns tOSLH 1.0 Symbol Parameter Conditions VCC TA /c32 25/c113 C Units (V) Typical VOLP Quiet Output Dynamic Peak VOL C L /c32 50 pF, VIH /c32 3.3V, VIL /c32 0V 3.3 0.8 V C L /c32 30 pF, VIH /c32 2.5V, VIL /c32 0V 2.5 0.6 VOLV Quiet Output Dynamic Valley VOL C L /c32 50 pF, VIH /c32 3.3V, VIL /c32 0V 3.3 /c16 0.8 V C L /c32 30 pF, VIH /c32 2.5V, VIL /c32 0V 2.5 /c16 0.6 Symbol Parameter Conditions Typical Units C IN Input Capacitance V CC /c32 Open, VI /c32 0V or VCC 7p F C OUT Output Capacitance V CC /c32 3.3V, VI /c32 0V or VCC 8p F C PD Power Dissipation Capacitance V CC /c32 3.3V, VI /c32 0V or VCC , f /c32 10 MHz 25 pF

www.fairchildsemi.com 6 74LCX08 Schematic Diagram Generic for LCX Family

7 www.fairchildsemi.com 74LCX08 Tape and Reel Specification Tape Format for DQFN TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed BQX Carrier 3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed T a p e S i z e ABCDN W 1 W 2

www.fairchildsemi.com 8 74LCX08 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A

9 www.fairchildsemi.com 74LCX08 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D

www.fairchildsemi.com 10 74LCX08 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm

11 www.fairchildsemi.com 74LCX08 Low Voltage Quad 2-Input AND Gate with 5V Tolerant Inputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com