74F862 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

/C0080 /C0115 /C0111/C0110/C0111 /C0115 74F862, 74F863 Bus transceivers (3-State) Product specification Supersedes data of 1999 Jan 08 IC15 Data Handbook

2000 Mar 24

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

22000 Mar 24 853-0881 23378

FEATURES

  • Provide high performance bus interface buffering for wide data/address paths or buses carrying parity
  • High impedance NPN base inputs for reduced loading (20µA in High and Low states)
  • IIL is 20µA vs. 1000µA for AM29861 series
  • Buffered control inputs for light loading, or increased fan-in as required with MOS microprocessors
  • Positive and negative over-shoots are clamped to ground
  • 3-State outputs glitch free during power-up and power-down
  • Slim dual In-line (DIP) 300mil package
  • Broadside pinout compatible with AMD AM29862–29863
  • Outputs sink 64mA

DESCRIPTION

The 74F862 and 74F863 bus transceivers provide high performance bus interface buffering for wide data/address paths of buses carrying parity. The 74F863 9-bit bus transceiver has NOR-ed transmit and receive output enables for maximum control flexibility. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F862 6.0ns 150mA 74F863 6.0ns 115mA

ORDERING INFORMATION

VCC = 5V±10%; Ta = 0°C to +70°C PKG DWG # 24-pin Plastic Slim Dual In-line (300mil) Package N74F862N, N74F863N SOT222-1 24-pin Plastic Small Outline Large

1 N74F862D, N74F863D SOT137-1

NOTE: 1. Thermal mounting techniques are recommended. See SMD Process Applications for a discussion of thermal considerations for surface mounted devices. PIN CONFIGURATION OEAB VCC TOP VIEW OEBA GND SF00518

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 3

13 OEAB

23 22 21 20 19 18 17 16 15 14 A1 A2 A3 A4 A5 A6 A7 A8 A9 B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 VCC = Pin 24 GND = Pin 12 74F862 SF00522 LOGIC SYMBOL (IEEE/IEC) 74F862 EN1(BA) EN2(AB) Δ Δ Δ 2 Δ SF00523 PIN CONFIGURATION OEAB 1 VCC TOP VIEW OEBA 0 GND OEBA 1 OEAB 0 SF01441 74F863 LOGIC SYMBOL

1 OEBA 0

23 22 21 20 19 18 17 16 15 A1 A2 A3 A4 A5 A6 A7 A8 B0 B1 B2 B3 B4 B5 B6 B7 B8 VCC = Pin 24 GND = Pin 12 74F863

14 OEAB 0

LOGIC SYMBOL (IEEE/IEC) 74F863 EN1(BA) EN2(AB) Δ Δ Δ 2 Δ SF00526

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 4

INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW A0 – A9 Data transmit inputs 3.5/0.117 70µA/70µA B0 – B9 Data receive inputs 3.5/0.117 70µA/70µA 74F862 OEBA Transmit output enable input 1.0/0.033 20µA/20µA74F862 OEAB Receive output enable input 1.0/0.033 20µA/20µA A0 – A9 Data transmit outputs 1200/106.7 24mA/64mA B0 – B9 Data receive outputs 1200/106.7 24mA/64mA A0 – A9 Data transmit inputs 3.5/0.117 70µA/70µA B0 – B9 Data receive inputs 3.5/0.117 70µA/70µA 74F863 OEBA n Transmit output enable input 1.0/0.033 20µA/20µA74F863 OEAB n Receive output enable input 1.0/0.033 20µA/20µA A0 – A9 Data transmit outputs 1200/106.7 24mA/64mA B0 – B9 Data receive outputs 1200/106.7 24mA/64mA NOTE: One (1.0) FAST Unit Load is defined as: 20µA in the High state and 0.6mA in the Low state. FUNCTION TABLE FOR 74F862 INPUTS OPERATING MODES OEAB OEBA 74F862 L H A data to B bus H L B bus to A data H H Z H = High voltage level L = Low voltage level Z = High impedance “off” state FUNCTION TABLE FOR 74F863 INPUTS OPERATING MODES OEAB 0 OEAB 1 OEBA 0 OEBA 1 74F863 L L L H X X H A data to B bus H X X H L L L L B bus to A data H H H H Z H = High voltage level L = Low voltage level Z = High impedance “off” state

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 5

Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted, these limits are over the operating free-air temperature range. SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to +5.5 V IOUT Current applied to output in Low output state 128 mA Ta Operating free-air temperature range 0 to +70 °C Tstg Storage temperature –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –24 mA IOL Low-level output current 64 mA Ta Operating free-air temperature range 0 70 °C

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 6

DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX UNIT VCC = MIN, VIL= MAX IO =1 m A ±10%V CC 2.4 V VO High level output voltage VIL = MAX , VIH = MIN IOH = –1 mA ±5%V CC 2.4 3.3 V VOH High-level output voltage VCC = MIN, VIL= MAX IO =2 4 m A ±10%V CC 2.0 V VIL = MAX , VIH = MIN IOH = –24 mA ±5%V CC 2.0 V VO Low level output voltage VCC = MIN, VIL= MAX IOL = –48 mA ±10%V CC 0.38 0.55 V VOL Low-level output voltage VIL = MAX , VIH = MIN IOL = 64 mA ±5%V CC 0.42 0.55 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage OEAB , OEBA OEAB n, OEBAn VCC = 0.0 V, VI = 7.0 V 100 µA I max imum input voltage An, Bn VCC = 5.5 V, VI = 5.5 V 1 mA IIH High-level input current VCC = MAX, VI = 2.7 V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5 V –20 µA IIH + IOZH Off-state output current High-level voltage applied A B VCC = MAX, VO = 2.7 V 70 µA IIL + IOZL Off-state output current Low-level voltage applied An, Bn VCC = MAX, VO = 0.5 V –70 µA IOS Short-circuit output current3 VCC = MAX –100 –225 mA ICCH 145 195 mA An, Bn 74F863 ICCL VCC = MAX 140 195 mA ICCZ 165 220 mA ICC Supply current total ICCH 90 130 mA 74F862 ICCL VCC = MAX 120 170 mA ICCZ 130 160 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5 V, Ta = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last.

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 7

AC ELECTRICAL CHARACTERISTICS 74F863 SYMBOL PARAMETER TEST CONDITION Ta = +25°C VCC = 5 V C L = 50 pF, RL = 500 Ω Ta = 0°C to +70°C VCC = 5 V ±10% C L = 50 pF, RL = 500 Ω UNIT MIN TYP MAX MIN MAX tPLH tPHL Propagation delay An or Bn Waveform 1 4.0 3.0 6.0 5.0 9.0 8.0 3.5 2.5 10.0 9.0 ns tPLH tPHL Propagation delay B n or An Waveform 1 4.0 2.5 6.0 5.0 9.0 8.0 3.5 2.5 10.0 9.0 ns tPZH tPZL Output Enable time High or Low level OEBA n to An Waveform 3 Waveform 4 6.0 4.0 8.0 6.0 11.5 10.0 5.0 4.0 13.0 11.0 ns tPZH tPZL Output Enable time High or Low level OEAB n to Bn Waveform 3 Waveform 4 6.0 4.0 8.0 6.0 11.0 10.0 5.0 4.0 13.0 11.0 ns tPHZ tPLZ Output Disable time High or Low level OEBA n to An Waveform 3 Waveform 4 3.5 2.5 5.5 5.0 9.0 8.5 3.0 2.0 9.5 9.5 ns tPHZ tPLZ Output Disable time High or Low level OEAB n to Bn Waveform 3 Waveform 4 3.5 2.5 5.5 4.5 8.5 8.5 3.0 2.0 9.5 9.5 ns AC ELECTRICAL CHARACTERISTICS 74F862 SYMBOL PARAMETER TEST CONDITION Ta = +25°C VCC = 5 V C L = 50 pF, RL = 500 Ω Ta = 0°C to +70°C VCC = 5 V ±10% C L = 50 pF, RL = 500 Ω UNIT MIN TYP MAX MIN MAX tPLH tPHL Propagation delay An or Bn Waveform 2 4.0 1.5 6.0 3.5 9.0 6.5 3.0 1.5 10.0 7.0 ns tPLH tPHL Propagation delay B n or An Waveform 2 4.0 1.5 6.0 3.5 9.0 6.5 3.5 1.5 10.0 7.0 ns tPZH tPZL Output Enable time High or Low level OEBA n to An Waveform 3 Waveform 4 6.5 6.0 8.5 7.5 12.0 12.0 5.5 5.0 13.5 14.0 ns tPZH tPZL Output Enable time High or Low level OEAB n to Bn Waveform 3 Waveform 4 6.5 6.0 8.5 7.5 12.0 12.0 5.5 5.0 13.5 14.0 ns tPHZ tPLZ Output Disable time High or Low level OEBA n to An Waveform 3 Waveform 4 3.0 2.5 5.0 4.0 8.5 8.5 2.5 2.0 9.5 9.0 ns tPHZ tPLZ Output Disable time High or Low level OEAB n to Bn Waveform 3 Waveform 4 3.0 2.5 5.0 4.0 8.5 8.5 2.5 2.0 9.5 9.0 ns

Philips Semiconductors Product specification 74F862, 74F863Bus transceivers (3-State)

2000 Mar 24 8

Bn, An An, Bn tPLH tPHL SF00202 Waveform 1. Propagation Delay for Non-inverting Output An or Bn Bn or An tPLH VM VM VMVM tPHL SF00534 Waveform 2. Propagation Delay for Inverting Output An, Bn OEBA n OEAB n tPZH VM VM VM tPHZ VOH –0.3 V SF00535 0 V Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level An, Bn OEBA n OEAB n tPZL VM VM VM tPLZ VOL +0.3 V SF00536 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level NOTE: For all waveforms, VM = 1.5V. TEST CIRCUITS AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Open Collector Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00128 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product specification 74F862, 74F863 Bus transceivers (3-State)

2000 Mar 24 9

DIP24: plastic dual in-line package; 24 leads (300 mil) SOT222-1

Philips Semiconductors Product specification 74F862, 74F863 Bus transceivers (3-State)

2000 Mar 24 10

SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1

Philips Semiconductors Product specification 74F862, 74F863 Bus transceivers (3-State)

2000 Mar 24 11

Philips Semiconductors Product specification 74F862, 74F863 Bus transceivers (3-State)

2000 Mar 24 12

Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 2000 All rights reserved. Printed in U.S.A. Date of release: 03-00 Document order number: 9397 750 06999 /C0080 /C0115 /C0111/C0110/C0111 /C0115 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.