74F538

74F538 PHILIPS | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

/C0109 /C0110 /C0114 74F538 1-of -8 decoder (3–state) Product specification IC15 Data Handbook

1989 Apr 06

Philips Semiconductors Product specification 74F5381-of-8 decoder (3-State)

21989 Apr 06 853–1273 96267

DESCRIPTION

The 74F538 decoder/demultiplexer accepts three address (A0 - A2) input signals and decodes them to select one of eight mutually exclusive outputs. A Polarity control (P) input determines whether the outputs are active Low or active High. The 74F538 has 3-State outputs, and a High signal on the Output Enables (OE n) inputs will force all outputs to the high impedance state. Two active High (E2, E3) and two active Low (E0, E1) inputs are available for easy expansion to 1-of-32 decoding with four packages, or for data demultiplexing to 1-of-8 or 1-of-16 destinations. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F538 8.5ns 35mA

ORDERING INFORMATION

VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 20-Pin Plastic DIP N74F538N SOT146-1 20-Pin Plastic SOL N74F538D SOT163-1 PIN CONFIGURATION 10 11

1 VCC

P GND OE 1 OE 0 SF00996 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW A0 - A2 Address inputs 1.0/1.0 20µA/0.6mA E0, E1 Enable inputs (active Low) 1.0/1.0 20µA/0.6mA E2, E3 Enable inputs (active High) 1.0/1.0 20µA/0.6mA P Polarity control input 1.0/1.0 20µA/0.6mA OE 0, OE1 Output Enable inputs 1.0/1.0 20µA/0.6mA Q0 - Q7 Data outputs 150/40 3.0mA/24mA NOTE: One (1.0) FAST Unit Load is defined as: 20µA in the High state and 0.6mA in the Low state. LOGIC SYMBOL 67 1 7 VCC = Pin 20 GND = Pin 10 321 1 9 1 8 89 1 1 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 P OE0 OE1 A0 A1 A2 SF00997 LOGIC SYMBOL (IEEE/IEC) DMUX 0,8 G 0 SF00998 1,8 2,8 3,8 4,8 5,8 6,8 7,8 EN

Philips Semiconductors Product specification 74F5381-of-8 decoder (3-State)

1989 Apr 06 3

E P Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 OE 0 OE 1VCC = Pin 20 GND = Pin 10 3 2 11 9 1 8 891 1 SF00999 FUNCTION TABLE INPUTS OUTPUTS OPERATING MODEOE 0 OE 1 E0 E1 E2 E3 A 2 A 1 A 0 Q 0 Q 1 Q2 Q3 Q4 Q5 Q6 Q7 OPERATING MODE H X X H X X X X X X X X X X X X X X Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z High Impedance L L L L L L L L H X X X X H X X X X L X X X X L X X X X X X X X X X X X Outputs equal P input Disable L L L L L L L L L L L L L L L L H H H H H H H H L L L L L L H H L H L H H L L L L H L L L L H L L L L H L L L L L L L L L L L L L L L L Active High output L L L L L L L L L L L L L L L L H H H H H H H H H H H H L L H H L H L H L L L L L L L L L L L L L L L L H L L L L H L L L L H L L L L H Active High out ut (P = L) L L L L L L L L L L L L L L L L H H H H H H H H L L L L L L H H L H L H L H H H H L H H H H L H H H H L H H H H H H H H H H H H H H H H Active Low output L L L L L L L L L L L L L L L L H H H H H H H H H H H H L L H H L H L H H H H H H H H H H H H H H H H H L H H H H L H H H H L H H H H L Active Low out ut (P = H) H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state

Philips Semiconductors Product specification 74F5381-of-8 decoder (3-State)

1989 Apr 06 4

(Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5.0 mA VOUT Voltage applied to output in High output state –0.5 to +VCC V IOUT Current applied to output in Low output state 48 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN NOM MAX UNIT VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –3.0 mA IOL Low-level output current 24 mA Tamb Operating free-air temperature range 0 70 °C DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX UNIT V High level output voltage VCC = MIN, VIL = MAX, ±10%V CC 2.4 V VOH High-level output voltage VCC MIN, VIL MAX, VIH = MIN, IOH = MAX ±5%V CC 2.7 3.3 V VO Low level output voltage VCC = MIN, VIL = MAX, ±10%V CC 0.35 0.50 V VOL Low-level output voltage VCC MIN, VIL MAX, VIH = MIN, IOL = MAX ±5%V CC 0.35 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5V –0.6 mA IOZH Off-state output current High-level voltage applied VCC = MAX, VO = 2.7V 50 µA IOZL Off-state output current Low-level voltage applied VCC = MAX, VO = 0.5V –50 µA IOS Short-circuit output current3 VCC = MAX –60 –150 mA ICCH 30 40 mA ICC Supply current ICCL VCC = MAX 35 50 mA ICCZ 35 50 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value under the recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS should be performed last.

Philips Semiconductors Product specification 74F5381-of-8 decoder (3-State)

1989 Apr 06 5

AC ELECTRICAL CHARACTERISTICS LIMITS Tamb = +25°C Tamb = 0°C to +70°C SYMBOL PARAMETER TEST CONDITIONS VCC = +5.0V VCC = +5.0V ± 10% UNIT C L = 50pF, RL = 500Ω C L = 50pF, RL = 500Ω MIN TYP MAX MIN MAX tPLH tPHL Propagation delay An to Qn Waveform 1, 2 5.5 3.0 8.5 7.5 13.0 12.5 5.0 3.0 14.0 13.5 ns ns tPLH tPHL Propagation delay E 0 or E1 to Qn Waveform 1, 2 5.5 3.0 8.5 7.5 12.0 12.0 5.0 3.0 13.0 12.5 ns ns tPLH tPHL Propagation delay E 2 or E3 to Qn Waveform 1, 2 6.5 4.0 9.0 7.0 12.5 12.5 5.5 3.5 13.5 13.0 ns ns tPLH tPHL Propagation delay P to Qn Waveform 1, 2 4.5 3.5 9.5 6.5 15.0 10.0 4.0 3.5 16.5 10.5 ns ns tPZH tPZL Output Enable time OE 0 or OE1 to Qn Waveform 3 Waveform 4 2.5 6.5 5.5 9.5 9.5 13.5 2.0 6.0 11.0 15.0 ns ns tPHZ tPLZ Output Disable time OE 0 or OE1 to Qn Waveform 3 Waveform 4 1.0 1.0 3.0 3.5 6.0 8.5 1.0 1.0 7.0 9.5 ns ns AC WAVEFORMS For all waveforms, VM = 1.5V. VM VM VM VM tPHLtPLH An, P, En, En Qn SF01000 Waveform 1. Propagation Delay for Non-Inverting Outputs VM VM VM VM tPLHtPHL An, P, En, En Qn SF01001 Waveform 2. Propagation Delay for Inverting Outputs VM VM VM tPHZtPZH OE n Qn VOH -0.3V SF01002 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level VM VM VM tPLZtPZL OE n Qn VOL +0.3V SF01003 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level

Philips Semiconductors Product specification 74F5381-of-8 decoder (3-State)

1989 Apr 06 6

tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for 3-State Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00777 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product specification 74F5381-of -8 decoder (3–state)

1989 Apar 06 7

DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1

Philips Semiconductors Product specification 74F5381-of -8 decoder (3–state)

1989 Apar 06 8

SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1

Philips Semiconductors Product specification 74F5381-of -8 decoder (3–state)

1989 Apar 06 9

Philips Semiconductors Product specification 74F5381-of -8 decoder (3–state) yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05133 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.