74F365 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

/C0109 /C0110 /C0114 74F365, 74F366*, 74F367, 74F368* Buffers/drivers Product specification Supersedes data of 1990 Jan 08 IC15 Data Handbook

1999 Jan 08

  • Discontinued part. Please see the Discontinued Product List.

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers 74F365, 74F367 Hex Buffer/Driver (3-State) 74F366, 74F368 Hex Inverter Buffer/Driver (3-State)

21999 Jan 08 853–0042 20616

  • Discontinued part. Please see the Discontinued Products List.

FEATURES

  • High-impedance NPN base inputs for reduced loading (20µA in High and Low states)
  • High-speed
  • Bus oriented
  • 3-State buffer outputs sink 64mA TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F365, 74F367 5.0ns 36mA 74F366, 74F368 5.0ns 33mA

ORDERING INFORMATION

DESCRIPTION

V 5V ±10% PKG DWG #DESCRIPTION VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 16-pin plastic DIPN74F365N, N74F367N SOT38-4 16-pin plastic SON74F365D, N74F367D SOT109-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F(U.L.) HIGH/LOW LOAD VALUE HIGH/LOW I0 - I5 Inputs 1.0/0.033 20µA/20µA OE 0, OE1 Output enable inputs (active Low) 1.0/0.033 20µA/20µA Y0 - Y5, Y0 - Y5 Data Outputs 750/106.7 15mA/64mA PIN CONFIGURATION OE 1I0 GND VCCOE 0 74F365 SF00899 LOGIC SYMBOL 1064 VCC = Pin 16 GND = Pin 8 SF00900

1 OE0

LOGIC SYMBOL (IEEE/IEC) SF00901 EN 74F365 PIN CONFIGURATION OE 1I0 GND VCCOE 0 74F366 SF00902

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers

1999 Jan 08 3

  • Discontinued part. Please see the Discontinued Products List. LOGIC SYMBOL 1064 VCC = Pin 16 GND = Pin 8 SF00903

LOGIC SYMBOL (IEEE/IEC) SF00904 EN 74F366 PIN CONFIGURATION OE 1I0 GND VCCOE 0 74F367 SF00905 LOGIC SYMBOL 1064 VCC = Pin 16 GND = Pin 8 SF00906 LOGIC SYMBOL (IEEE/IEC) SF00907 EN1 74F367 EN2 PIN CONFIGURATION OE 1I0 GND VCCOE 0 74F368 SF00908

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers

1999 Jan 08 4

  • Discontinued part. Please see the Discontinued Products List. LOGIC SYMBOL 1064 VCC = Pin 16 GND = Pin 8 SF00909

LOGIC SYMBOL (IEEE/IEC) SF00910 74F368 EN1 EN2 LOGIC DIAGRAMS OE 0 OE 1 74F367 74F368 OE 0 OE 1 Y OE 74F365 74F366 15OE 1 OE 0 15OE 1 VCC = Pin 16 GND = Pin 8 SF00911 FUNCTION TABLE for 74F365 and 74F366 INPUTS OUTPUTS OE 0 OE 1 In Yn Yn L L L L H L L H H L X H X Z Z H X X Z Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state FUNCTION TABLE for 74F367 and 74F368 INPUTS OUTPUTS OE n In Yn Yn L L L H L H H L H X Z Z H = High voltage level L = Low voltage level X = Don’t care Z = High impedance “off” state

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers

1999 Jan 08 5

  • Discontinued part. Please see the Discontinued Products List. ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage range –0.5 to +7.0 V VIN Input voltage range –0.5 to +7.0 V IIN Input current range –30 to +5 mA VOUT Voltage applied to output in High output state range –0.5 to 5.5 V IOUT Current applied to output in Low output state 128 mA Tamb Operating free-air temperature range 0 to +70 °C TSTG Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT SYMBOL PARAMETER MIN TYP MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –15 mA IOL Low-level output current 64 mA Tamb Operating free-air temperature range 0 70 oC

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers

1999 Jan 08 6

  • Discontinued part. Please see the Discontinued Products List. DC ELECTRICAL CHARACTERISTICS Over recommended operating free-air temperature range unless otherwise noted. NO TAG LIMITS UNIT SYMBOL PARAMETER TEST CONDITIONS NO TAG MIN TYP NO TAG MAX VCC = MIN, VIL = MAX, 10%V CC 2.4 V VO High level output voltage VCC MIN, VIL MAX, VIH = MIN, IOH = –3mA 5%V CC 2.7 3.3 V VOH High-level output voltage VCC = MIN, VIL = MAX, 10%V CC 2.0 VVCC MIN, VIL MAX, VIH = MIN, IOH = –15mA 5%V CC 2.0 V VO Low level output voltage VCC = MIN , VIL = MAX, 10%V CC 0.55 V VOL Low-level output voltage VCC = MIN, VIL MAX, VIH = MIN, IOL = MAX 5%V CC 0.42 0.55 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage VCC = 0.0V, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current VCC = MAX, VI = 0.5V –20 µA IOZH Off-state output current, High-level voltage applied VCC = MAX, VO = 2.7V 50 µA IOZL Off-state output current, Low-level voltage applied VCC = MAX, VO = 0.5V –50 µA IOS Short-circuit output currentNO TAG VCC = MAX –100 –225 mA ICCH 25 35 mA 74F365 74F367 ICCL VCC = MAX 47 62 mA ICC Supply current (total) 74F367 ICCZ 35 48 mA ICC Supply current (total) ICCH 18 25 mA 74F366 74F368 ICCL VCC = MAX 47 62 mA74F368 ICCZ 35 48 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS TEST TA = +25°C TA = -55°C to +125°C SYMBOL PARAMETER TEST CONDITIONS VCC = +5.0V VCC = +5.0V ± 10% UNITCONDITIONS C L = 50pF, RL = 500Ω C L = 50pF, RL = 500Ω MIN TYP MAX MIN MAX tPLH tPHL Propagation delay In to Yn 74F366, 74F368 Waveform 1 3.0 2.0 5.0 3.0 6.5 5.0 3.0 1.5 7.5 5.5 ns ns tPLH tPHL Propagation delay I n to Yn 74F365, 74F367 Waveform 2 2.5 2.5 4.5 5.5 6.5 7.0 2.0 2.0 7.0 7.5 ns ns tPZH tPZL Output Enable time to High or Low level 74F365, 74F366 Waveform 3 Waveform 4 2.5 2.5 4.0 5.0 6.5 8.0 2.5 2.5 7.5 8.5 ns ns tPZH tPZL Output Enable time to High or Low level 74F367, 74F368 Waveform 3 Waveform 4 3.0 3.0 5.5 6.5 7.5 8.5 3.0 3.0 8.5 9.0 ns ns tPHZ tPLZ Output Disable time from High to Low level Waveform 3 Waveform 4 2.0 2.0 4.5 4.0 6.5 6.5 2.0 2.0 7.0 7.0 ns ns

Philips Semiconductors Product specification 74F365, 74F366* 74F367, 74F368*Buffers/drivers

1999 Jan 08 7

  • Discontinued part. Please see the Discontinued Products List. AC WAVEFORMS For all waveforms, Vm = 1.5V VM VM VM VM tPHL tPLH In Yn SF00912 Waveform 1. For Inverting Outputs VM VM VM VM tPHLtPLH In Yn SF00914 Waveform 2. For Non-Inverting Outputs VM VM VM tPHZtPZH OE Yn, Yn VOH -0.3V SF00913 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level VM VM VM tPLZtPZL VOL +0.3V OE 3.5V Yn, Yn SF00915 Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level TEST CIRCUIT AND WAVEFORM tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for 3-State Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00777 TEST SWITCH tPLZ closed tPZL closed All other open SWITCH POSITION

Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368*Buffers/drivers

1999 Jan 08 8

  • Discontinued part. Please see the Discontinued Product List. DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368*Buffers/drivers

1999 Jan 08 9

  • Discontinued part. Please see the Discontinued Product List. SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Philips Semiconductors Product specification 74F365, 74F366*, 74F367, 74F368*Buffers/drivers yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05118 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design. * Discontinued part. Please see the Discontinued Product List.