74F139 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

■ Multifunction capability ■ Two completely independent 1-of-4 decoders ■ Active LOW mutually exclusive outputs Ordering Code: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Logic Symbols IEEE/IEC Connection Diagram Truth Table H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Order Number Package Number Package Description 74F139SC M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow 74F139SJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide 74F139PC N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Inputs Outputs E A0 A1 O 0 O 1 O 2 O 3 H XXHHHH L LLLH H H L HLHLHH LLHHHLH L HHHHHL

3 www.fairchildsemi.com 74F139 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. Note 2: Either voltage limit or current limit is sufficient to protect inputs. Storage Temperature −65°C to +150°C Ambient Temperature under Bias −55°C to +125°C Junction Temperature under Bias −55°C to +150°C VCC Pin Potential to Ground Pin −0.5V to +7.0V Input Voltage (Note 2) −0.5V to +7.0V Input Current (Note 2) −30 mA to +5.0 mA Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output −0.5V to VCC 3 STATE Output −0.5V to +5.5V Current Applied to Output in LOW State (Max) twice the rated I OL (mA) ESD Last Passing Voltage (Min) 4000V Free Air Ambient Temperature 0 °C to +70°C Supply Voltage +4.5V to +5.5V Symbol Parameter Min Typ Max Units VCC Conditions VIH Input HIGH Voltage 2.0 V Recognized as a HIGH Signal VIL Input LOW Voltage 0.8 V Recognized as a LOW Signal VCD Input Clamp Diode Voltage −1.2 V Min I IN = −18 mA VOH Output HIGH Voltage 10% V CC 2.5 VM i n IOH = −1 mA 5% V CC 2.7 I OH = −1 mA VOL Output LOW Voltage 10% V CC 0.5 V Min I OL = 20 mA IIH Input HIGH Current 5.0 µAM a x V IN = 2.7V IBVI Input HIGH Current Breakdown Test 7.0 µAM a x V IN = 7.0V ICEX Output HIGH Leakage Current 50 µAM a x V OUT = VCC VID Input Leakage Test 4.75 V 0.0 IID = 1.9 µA All Other Pins Grounded IOD Output Leakage Circuit Current 3.75 µA0 . 0 VIOD = 150 mV All Other Pins Grounded IIL Input LOW Current −0.6 mA Max V IN = 0.5V IOS Output Short-Circuit Current −60 −150 mA Max V OUT = 0V ICC Power Supply Current 13 20 mA Max Symbol Parameter TA = +25°CT A = 0°C to +70°C Units VCC = +5.0V V CC = +5.0V C L = 50 pF C L = 50 pF Min Typ Max Min Max

www.fairchildsemi.com 4 74F139 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150 Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D

5 www.fairchildsemi.com 74F139 Dual 1-of-4 Decoder/Demultiplexer Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300 Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com