N74F139D-T NXP | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

/C0109 /C0110 /C0114 74F139 Dual 1-of-4 decoder/demultiplexer Product specification IC15 Data Handbook

1990 Feb 23

Philips Semiconductors Product specification 74F1391-of-4 decoder/demultiplexer 2February 23, 1990 853–0344 98903

FEATURES

  • Demultiplexing capability
  • Two independent 1-of-4 decoders
  • Multifunction capability

DESCRIPTION

The 74F139 is a high speed, dual 1-of-4 decoder/demultiplexer. This device has two independent decoders, each accepting two binary weighted inputs (A0n, A1n) and providing four mutually exclusive active-Low outputs (Q0n–Q 3n). Each decoder has an active-Low Enable (E). When E is High, every output is forced High. The Enable can be used as the Data input for a 1-of-4 demultiplexer application. TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F139 5.3ns 13mA PIN CONFIGURATION 107 Q 3a VCC Q 0b Q 1b Q 2b A1b Eb A0b Ea A0a Q 2a A1a Q 0a Q 1a 98GND Q 3b SF00129

ORDERING INFORMATION

VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 16-pin plastic DIP N74F139N SOT38-4 16-pin plastic SO N74F139D SOT109-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW Ana, Anb Address inputs 1.0/1.0 20µA/0.6mA Ea, Eb Enable inputs (active Low) 1.0/1.0 20µA/0.6mA Q 0n–Q 3n Data outputs (active Low) 50/33 1.0mA/20mA NOTE: One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. LOGIC SYMBOL A0a A1aEa 12 3 VCC = Pin 16 GND = Pin 8 SF00130 Q0a Q1a Q2a 45 6 Q3a A0b A1bEb 15 14 13 Q0b Q1b Q2b 12 11 10 Q3b DECODER a DECODER b IEC/IEEE SYMBOL SF00131 DEMUX2 G 0

Philips Semiconductors Product specification 74F1391-of-4 decoder/demultiplexer February 23, 1990 3 LOGIC DIAGRAM SF00132 12 3 Ea A0a A1a 4 567 Q 0a Q 1a Q 2a Q 3a VCC = Pin 16 GND = Pin 8 15 14 13 Eb A0b A1b 12 11 10 9 Q 0b Q 1b Q 2b Q 3b FUNCTION TABLE INPUTS OUTPUTS E A0 A1 Q 0 Q 1 Q 2 Q 3 H X X H H H H L L LL HHH L H LH LHH L L HH HLH L H H H H H L NOTES: H = High voltage level L = Low voltage level X = Don’t care ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state –0.5 to +VCC V IOUT Current applied to output in Low output state 40 mA Tamb Operating free-air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNITSYMBOL PARAMETER MIN NOM MAX UNIT VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIK Input clamp current –18 mA IOH High-level output current –1 mA IOL Low-level output current 20 mA Tamb Operating free-air temperature range 0 +70 °C

Philips Semiconductors Product specification 74F1391-of-4 decoder/demultiplexer February 23, 1990 4 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNITSYMBOL PARAMETER TEST CONDITIONS 1 MIN TYP 2 MAX UNIT VO High level output voltage VCC = MIN, VIL = MAX ±10%V CC 2.5 V VOH High-level output voltage VIH = MIN, IOH = MAX ±5%V CC 2.7 3.4 V VO Low level output voltage VCC = MIN, VIL = MAX ±10%V CC 0.30 0.50 V VOL Low-level output voltage VIH = MIN, IOL = MAX ±5%V CC 0.30 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltage VCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IILL Low-level input current VCC = MAX, VI = 0.5V –0.6 mA IOS Short-circuit output current3 VCC = MAX –60 –150 mA ICC Supply current (total) VCC = MAX 13 20 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS TEST VCC = +5.0V VCC = +5.0V ± 10% SYMBOL PARAMETER TEST CONDITION Tamb = +25°C Tamb = 0°C to +70°C UNITCONDITION C L = 50pF, RL = 500Ω C L = 50pF, RL = 500Ω MIN TYP MAX MIN MAX tPLH tPHL Propagation delay A0 ir A1 to Qna, Qnb Waveform 1, 2 3.5 4.0 5.3 6.1 7.0 8.0 3.0 4.0 8.0 9.0 ns tPLH tPHL Propagation delay E n to Qna, Qnb Waveform 2 3.5 3.0 5.4 4.7 7.0 6.5 3.5 3.0 8.0 7.5 ns AC WAVEFORMS For all waveforms, VM = 1.5V VMVM VMVM Q n An tPHL tPLH SF00133 Waveform 1. Propagation Delay for Inverting Outputs VMVM VMVM Q n An, En tPHL tPLH SF00134 Waveform 2. Propagation Delay for Non-Inverting Outputs

Philips Semiconductors Product specification 74F1391-of-4 decoder/demultiplexer February 23, 1990 5 TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Totem-Pole Outputs DEFINITIONS: R L = Load resistor; see AC ELECTRICAL CHARACTERISTICS for value. C L = Load capacitance includes jig and probe capacitance; see AC ELECTRICAL CHARACTERISTICS for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM SF00006

Philips Semiconductors Product specification 74F139Dual 1-of-4 decoder/demultiplexer

1990 Feb 23 6

DIP16: plastic dual in-line package; 16 leads (300 mil) SOT38-4

Philips Semiconductors Product specification 74F139Dual 1-of-4 decoder/demultiplexer

1990 Feb 23 7

SO16: plastic small outline package; 16 leads; body width 3.9 mm SOT109-1

Philips Semiconductors Product specification 74F139Dual 1-of-4 decoder/demultiplexer yyyy mmm dd 8 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05077 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.