74F06 PHILIPS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

/C0109 /C0110 /C0114 74F06, 74F06A, 74F07, 74F07A Inverter/buffer drivers Product specification IC15 Data Handbook

1992 Jul 24

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) 2July 24, 1992 853–1122 07270 FEATURES OF 74F06, 74F07

  • Open Collector output drive 64mA
  • High speed
  • 12V output termination voltage
  • Symmetrical propagation delays FEATURES OF 74F06A, 74F07A
  • Open Collector output drive 48mA
  • High speed
  • 30V output termination voltage
  • Replaces 74F06 and 74F07
  • Improved performance upgrade for 74F06 and 74F07
  • Reduced IOH leakage @ 30V TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F06 3.5ns 30mA 74F06A 9.0ns 30mA 74F07 4.5ns 32mA 74F07A 10.0ns 32mA

ORDERING INFORMATION

DESCRIPTION

VCC = 5V ±10%, Tamb = 0°C to +70°C PKG DWG # 14-pin plastic Dual In-line Package N74F06N, N74F06AN SOT27–1 14-pin plastic Small Outline N74F07D, N74F07AD SOT108–1 PIN CONFIGURATIONS GND VCC SF00016 74F06/74F06A GND VCC SF00017 74F07/74F07A LOGIC SYMBOLS 468 1 0 13 5 91 1 1 3 VCC = Pin 14 GND = Pin 7 SF00018 A0 A1 A2 A3 A4 A5 Y0Y 1Y 2Y 3Y 4Y 5 74F06/74F06A 468 1 0 13 5 91 1 1 3 VCC = Pin 14 GND = Pin 7 SF00019 A0 A1 A2 A3 A4 A5 Y0 Y1 Y2 Y3 Y4 Y5 74F07/74F07A

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) July 24, 1992 3 IEC/IEEE SYMBOLS SF00020 11 10 9 8 5 6 3 4 1 2 74F06/74F06A SF00021 11 10 9 8 5 6 3 4 1 2 74F07/74F07A LOGIC DIAGRAMS VCC = Pin 14 GND = Pin 7 SF00022 Y 74F06/74F06A VCC = Pin 14 GND = Pin 7 SF00023 74F07/74F07A INPUT AND OUTPUT LOADING AND FAN OUT TABLE PINS DESCRIPTION 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW An Data inputs (’F06, ’F07) 1.0/1.0 20µA/0.6mA An Data inputs (’F06A, ’F07A) 1.0/0.7 20µA/0.4mA Yn Data outputs (’F06) OC/106.7 OC/64mA Yn Data outputs (’F06A) OC/80 OC/48mA Yn Data outputs (’F07) OC/106.7 OC/64mA Yn Data outputs (’F07A) OC/80 OC/48mA NOTES: 1. One (1.0) FAST unit load is defined as: 20µA in the High state and 0.6mA in the Low state. 2. OC = Open Collector FUNCTION TABLE INPUTS OUTPUTS ’F06, ’F06A ’F07, ’F07A An Yn Yn L H L H L H NOTES: 1. H = High voltage level 2. L = Low voltage level

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) July 24, 1992 4 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limit set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage –0.5 to +7.0 V VIN Input voltage –0.5 to +7.0 V IIN Input current –30 to +5 mA VOUT Voltage applied to output in High output state ’F06, ’F07 –0.5 to 12 V ’F06A, ’F07A –0.5 to 30 V IOUT Current applied to output in Low output state ’F06, ’F07 128 mA ’F06A, ’F07A 96 mA Tamb Operating free air temperature range 0 to +70 °C Tstg Storage temperature range –65 to +150 °C RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER LIMITS UNIT MIN NOM MAX VCC Supply voltage 4.5 5.0 5.5 V VIH High-level input voltage 2.0 V VIL Low-level input voltage 0.8 V IIk Input clamp current –18 mA VOH High-level output voltage ’F06, ’F07 12 V ’F06A, ’F07A 30 V IOL Low-level output current ’F06, ’F07 64 mA ’F06A, ’F07A 48 mA Tamb Operating free air temperature range 0 +70 °C

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) July 24, 1992 5 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL PARAMETER TEST CONDITIONS 1 LIMITS UNIT MIN TYP 2 MAX IOH High-level output current ’F06, ’F07 VCC = MIN, VIL = MAX, V MAX V MIN 250 µA current ’F06A, ’F07A VOH = MAX , VIH = MIN 100 µA VOL Low-level output voltage VCC = MIN, VIL = MAX, IOL = MAX ±10% V CC 0.30 0.50 V VIH = MIN ±5% V CC 0.30 0.50 V VIK Input clamp voltage VCC = MIN, II = IIK –0.73 –1.2 V II Input current at maximum input voltageVCC = MAX, VI = 7.0V 100 µA IIH High-level input current VCC = MAX, VI = 2.7V 20 µA IIL Low-level input current’F06, ’F07 VCC = MAX, VI = 0.5V –0.6 mA ’F06A, ’F07A –0.4 mA ICC Supply current (total)74F06, 74F06A ICCH VCC = MAX 5.0 8.0 mA 74F06A ICCL 30 43 mA 74F07, 74F07A ICCH 10 14 mA 74F07A ICCL 32 45 mA NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25°C. 3. Not more than one output should be shorted at a time. For testing IOS , the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITION VCC = +5.0V Tamb = +25°C C L = 50pF, RL = 100Ω VCC = +5.0V ± 10% Tamb = 0°C to +70°C C L = 50pF, RL = 100Ω UNIT Min Typ Max Min Max tPLH Propagation delay ’F06 Waveform 1 2.0 1.5 3.5 3.0 6.0 5.5 1.5 1.0 6.5 6.0 ns PLH tPHL gy An to Yn ’F06A Wa veform 1 5.0 2.0 9.0 4.0 11.0 6.0 4.0 2.0 15.0 8.0 ns tPLH Propagation delay ’F07 Waveform 2 2.0 3.0 4.0 5.0 6.0 7.0 2.0 2.5 6.5 7.5 ns PLH tPHL gy An to Yn ’F07A Wa veform 2 6.0 5.0 10.5 7.5 13.0 10.0 5.0 4.0 17.0 13.0 ns

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) July 24, 1992 6 TYPICAL PROPAGATION DELAYS VERSUS LOAD FOR OPEN COLLECTOR OUTPUTS SF00024 0 100 200 300 400 500 600 Load resistor (Ω ) Propagation delay (ns) tPLH A versions tPLH non-A versions tPHL both versions NOTE: When using Open-Collector parts, the value of the pull-up resistor greatly affects the value of the tPLH . For example, changing the specified pull-up resistor value from 500Ω to 100Ω will improve the tPLH up to 50% with only a slight increase in the tPHL . However, if the value of the pull-up resistor is changed, the user must make certain that the total IOL current through the resistor and the total IIL’s of the receivers does not exceed the IOL maximum specification.

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AHex inverter/buffer drivers (open-collector) July 24, 1992 7 AC WAVEFORMS VMVM VMVM Yn An tPHL tPLH SF00025 Waveform 1. Propagation delay for inverting outputs VMVM VMVM Yn An tPLH tPHL SF00026 Waveform 2. Propagation delay for non-inverting outputs NOTE: For all waveforms, VM = 1.5V. TEST CIRCUIT AND WAVEFORMS tw 90% VM 10% 90% VM 10% 90% VM 10% 90% VM 10% NEGATIVE PULSE POSITIVE PULSE tw AMP (V) tTHL (tf ) INPUT PULSE REQUIREMENTS rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns Input Pulse Definition VCC family 74F D.U.T.PULSE GENERATOR R LC LR T VIN VOUT Test Circuit for Open Collector Outputs DEFINITIONS: R L = Load resistor; see AC electrical characteristics for value. C L = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. R T = Termination resistance should be equal to ZOUT of pulse generators. tTHL (tf ) tTLH (tr ) tTLH (tr ) AMP (V) amplitude 3.0V 1.5V VM R L 7.0V SF00027

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AInverter/buffer drivers

1992 Jul 24 8

DIP14: plastic dual in-line package; 14 leads (300 mil) SOT27-1

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AInverter/buffer drivers

1992 Jul 24 9

SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1

Philips Semiconductors Product specification 74F06, 74F06A, 74F07, 74F07AInverter/buffer drivers yyyy mmm dd 10 Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support — These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Philips Semiconductors

811 East Arques Avenue

P.O. Box 3409 Sunnyvale, California 94088–3409 Telephone 800-234-7381  Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. print code Date of release: 10-98 Document order number: 9397-750-05054 /C0109 /C0110 /C0114 Data sheet status Objective specification Preliminary specification Product specification Product status Development Qualification Production Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Data sheet status [1] Please consult the most recently issued datasheet before initiating or completing a design.