74AVC1T45DW-7

74AVC1T45_V01 DIODES | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 17

Technical content

Features

• Wide Supply Voltage Range:  VCC(A): from 1.2V to 3.6V  VCC(B): from 1.2V to 3.6V
• ± 12mA Output Drive at 3.3V
• High Noise Immunity—(100mV Hysteresis Typical)
• IOFF Supports Partial-Power-Down Mode Operation
• IOFF Controlled by Either VCC at 0V
• Inputs Accept up to 4.6V
• ESD Protection Exceeds JESD 22  200-V Machine Model (A115)  2000-V Human Body Model (A114)  1000 V Charged Device Model ( C101)
• Latch-Up Exceeds 100mA per JESD 78, Class I
• X2-DFN1409-6 Package Designed as a Direct Replacement for Chip-Scale Packaging.
• Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments X2-DFN1410-6 X2-DFN1409-6 Chip Scale Alternative A GND B DIR Vcc(A) Vcc(B)1 6 (Bottom View) B SOT26 (Top View) GND A 43 1 6Vcc(A) Vcc(B) DIR X2-DFN0910-6 X1-DFN1010-6 (Top View) A GND B DIR Vcc(A) Vcc(B) SOT363

Applications

• Voltage Level Translation Well Suited to Join Logic Types Operating at Different Voltages
• Power Down Signal Isolation If Either Voltage Domain is Turned off the Signal is Isolated and There is no Loading on Signal Lines
• Wide Array of Products, such as:  Cell Phones, Tablets, E-Readers  PCs, Notebooks, Netbooks, Ultrabooks  Networking, Routers, Gateways  Computer Peripherals, Hard Drives, CD/DVD ROMs  TVs, DVDs, DVRs, Set Top Boxes  Personal Navigation/GPS  MP3 players, Cameras, Video Recorders Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant . 2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 1 of 17 www.diodes.com November 2018 © Diodes Incorporated

Ordering Information

7 : Tape & Reel PackingLogic Device 74 : Logic Prefix AVC : 1.2 to 3.6V Family 1T : One gate 45 : 1- Bit Transceiver with direction contol With Voltage Translation FW3 : FW5 : X1-DFN1010-6 FZ4 : X2-DFN1410-6 : SOT363DW : SOT26W6 FX4 : X2-DFN1409-6 X2-DFN0910-6 Part Number Package Code Packaging 7” Tape and Reel (Note 7) Quantity Part Number Suffix 74AVC1T45W6-7 W6 SOT26 3000/Tape & Reel -7 74AVC1T45DW-7 DW SOT363 3000/Tape & Reel -7 74AVC1T45FW3-7 FW3 X2-DFN0910-6 5000/Tape & Reel -7 74AVC1T45FW5-7 FW5 X1-DFN1010-6 5000/Tape & Reel -7 74AVC1T45FZ4-7 FZ4 X2-DFN1410-6 5000/Tape & Reel -7 74AVC1T45FX4-7 FX4 X2-DFN1409-6 5000/Tape & Reel -7 Pin Descriptions Pin Name Pin Function VCC(A) 1 Supply for I/O pin A and Reference for DIR GND 2 Ground A 3 Data Input/Output B 4 Data Input/Output DIR 5 Direction Control VCC(B) 6 Supply for I/O pin B Function Table Supply voltage Input Input/Output VCC(A), VCC(B) DIR (Direction Pin) A B 1.2 V to 3. 6 V L A = B Input 1.2 V to 3. 6 V H Input B = A GND X Z Z 74AVC1T45 Document number: DS38131 Rev. 2 – 2 2 of 17 www.diodes.com November 2018 © Diodes Incorporated

A B VCC(A) VCC(B) Absolute Maximum Ratings (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol Parameter Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV ESD MM Machine Model ESD Protection 200 V VCC(A), VCC(B) Supply Voltage Range -0.5 to +4.6 V VI Input Voltage Range -0.5 to +4.6 V VO Voltage Applied to Output in High Impedance or IOFF State -0.5 to +4.6 V VO Voltage Applied to Output in High or Low State A pin -0.5 to VCC(A) +0.5 V B pin -0.5 to VCC(B) +0.5 V IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current -50 mA IO Continuous Output Current ±50 mA — Continuous Current Through VCC or GND ±100 mA TJ Operating Junction Temperature -40 to +150 °C TSTG Storage Temperature -65 to +150 °C Note: 5. Stresses beyond the absolute maximum can result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 3 of 17 www.diodes.com November 2018 © Diodes Incorporated

Recommended Operating Condition (Notes 6, 7 & 8) (@TA = +25°C, unless otherwise specified.) Symbol Parameter VCCI VCCO Min Max Units VCC(A) Operating Voltage — — 1.2 3.6 V VCC(B) Operating Voltage — — 1.2 3.6 V VIH High-Level Input Voltage Data Inputs 2.7V to 3.6V 1.2V to 3.6V 2 — VIL Low-Level Input Voltage Data Inputs VIH High-Level Input Voltage DIR (Referenced to VCCA) 2.7V to 3.6V 1.2V to 3.6V 2 — VIL Low-Level Input Voltage DIR (Referenced to VCCA) VI Input Voltage — — 0 3.6 V VO Output Voltage Active State — — 0 VCCO V 3-State — — 0 3.6 V IOH High-Level Output Current 1.2V to 3.6V 1.2V — -3 mA 1.2V to 3.6V 1.4V to 1.6V — -6 1.2V to 3.6V 1.65V to 1.95V — -8 1.2V to 3.6V 2.3V to 2.7V — -9 1.2V to 3.6V 3V to 3.6V — -12 IOL Low-Level Output Current 1.2V to 3.6V 1.2V — 3 mA 1.2V to 3.6V 1.4V to 1.6V — 6 1.2V to 3.6V 1.65V to 1.95V — 8 1.2V to 3.6V 2.3V to 2.7V — 9 1.2V to 3.6V 3V to 3.6V — 12 Δt/ΔV Input Transition Rise or Fall Rate 1.2V to 3.6V 1.2V to 3.6V — 5 ns/V TA Operating Free-Air Temperature -40 +85 °C Note: 6. VCCO is the VCC associated with the output port. 7. VCCI is the VCC associated with the input port. 8. All unused inputs of the device must be held at VCCI of GND. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 4 of 17 www.diodes.com November 2018 © Diodes Incorporated

Electrical Characteristics (Notes 9 & 10) (@TA = +40°C to +85°C, unless otherwise specified.) Symbol Parameter Test Conditions VCC (A) VCC (B) TA = +25°C TA = -40°C to +85°C Min Typ Max Min Max Unit VOH High Level Output Voltage V IOH = -12mA 3V 3V — — — 2.3 — VOL Low-Level Output Voltage V IOL = 3mA 1.2V 1.2V — 0.15 — — — IOL = 6mA 1.4V 1.4V — — — — 0.35 IOL = 8mA 1.65V 1.65V — — — — 0.45 IOL = 9mA 2.3V 2.3V — — — — 0.55 IOL = 12mA 3V 3V — — — — 0.7 IOFF Power Down Leakage Current A Pin VI or VO = 0V to 3.6V 0V 0V to 3.6V -1 ±0.1 1 -5 5 μA B Pin 0V to 3.6V 0V -1 ±0.1 1 -5 5 IOZ 3-State Leakage Current B Pin VO = VCCO or GND VI= VCCI or GND 0V 0V to 3.6V -2.5 ±0.5 2.5 -5 5 μA A Pin 0V to 3.6V 0V -2.5 ±0.5 2.5 -5 5 ICCA Supply Current VI = VCCI or GND IO = 0 1.2 to 3.6V 11.2V to 3.6V — — — — 10 0V 3.6V — — — — 10 ICCB Supply Current VI = VCCI or GND IO = 0 1.2V to 3.6V 1.2V to 3.6V — — — — 10 μA 0V 3.6V — — — — 10 3.6V 0V — — — — -2 ICCA + ICCB Supply Current VI = VCCI or GND IO = 0 1.2V to 3.6V 1.2V to 3.6V — — — — 20 μA CI Input Capacitance DIR VI= VCC(A) or GND 3.3V 3.3V — 2.5 — — — pF CIO Input/Output Capacitance A or B pin VI= VCC(A)/(B) or GND 3.3V 3.3V — 6.0 — — — pF Notes: 9. VCCO is the VCC associated with the output port. 10. VCCI is the VCC associated with the input port. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 5 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Characteristics (VCC = 3.3V, TA = +25°C, unless otherwise specified.) Symbol Parameter Package Test Conditions Min Typ Max Unit ϴJA Thermal Resistance Junction- to-Ambient SOT26 (Note 11) — 166 — °C/W SOT363 — 371 — X2-DFN0910-6 — 530 — X2- DFN1410-6 — 430 — X2-DFN1409-6 — 450 — X1-DFN1010-6 — 510 — ϴJC Thermal Resistance Junction- to-Case SOT26 (Note 11) — 46 — °C/W SOT363 — 143 — X2-DFN0910-6 — 260 — X2- DFN1410-6 — 190 — X2-DFN1409-6 — 200 — X1-DFN1010-6 — 250 — Note: 11. Test condition for all packages: Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout. Switching Characteristics VCC (A) = 1.2V, TA = -40°C to +85°C, See Figure 1 Parameter From (Input) To (Output) VCC(B) = 1.2V VCC(B) = 1.5V ±0.1 VCC(B) = 1.8V ±0.15V VCC(B) = 2.5V ±0.2V VCC(B) = 3.3V ±0.3V Unit TYP TYP TYP TYP TYP *Enable times are calculated vales see table at end of switching characteristics. VCC (A) = 1.5V ± 0.1V, TA = -40°C to +85°C, See Figure 1 Parameter From (Input) To (Output) VCC(B) = 1.2V VCC(B) = 1.5V ±0.1 VCC(B) = 1.8V ±0.15V VCC(B) = 2.5V ±0.2V VCC(B) = 3.3V ±0.3V Unit TYP Min Max Min Max Min Max Min Max tpZH* DIR B 6.7 — 12.3 — 12 — 11.1 — 10.7 ns *Enable times are calculated vales see table at end of switching characteristics. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 6 of 17 www.diodes.com November 2018 © Diodes Incorporated

Switching Characteristics (continued) VCC (A) = 1.8V ± 0.15V, TA = -40°C to +85°C, See Figure 1 Parameter From (Input) To (Output) VCC(B) = 1.2V VCC(B) = 1.5V ±0.1 VCC(B) = 1.8V ±0.15V VCC(B) = 2.5V ±0.2V VCC(B) = 3.3V ±0.3V Unit TYP Min Max Min Max Min Max Min Max *Enable times are calculated vales see table at end of switching characteristics. VCC (A) = 2.5V ± 0.2V, TA = -40°C to +85°C, See Figure 1 Parameter From (Input) To (Output) VCC(B) = 1.2V VCC(B) = 1.5V ±0.1 VCC(B) = 1.8V ±0.15V VCC(B) = 2.5V ±0.2V VCC(B) = 3.3V ±0.3V Unit TYP Min Max Min Max Min Max Min Max tpLH A B ns tpLH B A ns tpHZ DIR A ns tpHZ DIR B ns tpZH* DIR A ns tpZH* DIR B ns *Enable times are calculated vales see table at end of switching characteristics. VCC (A) = 3.3V ± 0.3V, TA = -40°C to +85°C, See Figure 1 Parameter From (Input) To (Output) VCC(B) = 1.2V VCC(B) = 1.5V ±0.1 VCC(B) = 1.8V ±0.15V VCC(B) = 2.5V ±0.2V VCC(B) = 3.3V ±0.3V Unit TYP Min Max Min Max Min Max Min Max tpLH A B ns tpLH B A ns tpHZ DIR A ns tpHZ DIR B ns tpZH* DIR A ns tpZH* DIR B ns *Enable times are calculated vales see table at end of switching characteristics. 74AVC1T45 Document number: DS38131 Rev. 2 – 2 7 of 17 www.diodes.com November 2018 © Diodes Incorporated

Enable times can be calculated as follows:

• tpZH (DIR to A) = tpLZ (DIR to B) + tpLH (B to A)
• tpZL (DIR to A) = tpHZ (DIR to B) + tpHL (B to A)
• tpZH (DIR to B) = tpLZ (DIR to A) + tpLH (A to B)
• tpZL (DIR to B) = tpHZ (DIR to A) + tpHL (A to B) These times represent the length of time from a direction change plus the propagation time through the part. A new input signal must not be applied until the new input pin has been disabled. Operating Characteristics (TA = +25°C, unless otherwise specified.) Parameter Power Dissipation Capacitance Test Conditions VCC(A) = VCC(B) = 1.8V VCC(A) = VCC(B) = 2.5V VCC(A) = VCC(B) = 3.3V VCC(A) = VCC(B) = 5V Unit Typ Typ Typ Typ Cpd (A) A- Input, B- Output CL = 0 pF f = 10 MHz tr = tf = 1 ns 3 4 4 4 pF B- Input, A- Output 18 19 20 21 Cpd (B) A- Input, B- Output CL = 0 pF f = 10 MHz tr = tf = 1 ns 18 19 20 21 pF B- Input, A- Output 3 4 4 4 74AVC1T45 Document number: DS38131 Rev. 2 – 2 8 of 17 www.diodes.com November 2018 © Diodes Incorporated

Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. Waveform 1 is for an output with input set up as a low and device coming out or into 3-state via DIR control. Waveform 2 is for an output with input set up as a high and device coming out or into 3-state via DIR control. C. All pulses are supplied at pulse repetition rate ≤ 10 MHz. D. tPLZ and tPHZ are the same as tdis. E. tPZL and tPZH are the same as tEN. F. tPLH and tPHL are the same as tPD. G. VCCI is the VCC associated with the input. F. VCCO is the VCC associated with the output.

(1) SOT363, SOT563 1 2 3 XX Y W X XX : Identification code W : Week : A~Z : 1~26 week; X : A~Z : Internal Code Y : Year 0~9 a~z : 27~52 week; z represents 52 and 53 week Part Number Package Identification Code 74AVC1T45W6-7 SOT26 7A 74AVC1T45DW-7 SOT363 7B (2) X2-DFN1010-6, X2-DFN1410-6, and X2-DFN1409-6 Part Number Package Identification Code 74AVC1T45FW3-7 X2-DFN0910-6 7A 74AVC1T45FW5-7 X1-DFN1010-6 7X 74AVC1T45FX4-7 X2-DFN1409-6 7B 74AVC1T45FZ4-7 X2-DFN1410-6 7C 74AVC1T45 Document number: DS38131 Rev. 2 – 2 10 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. SOT26 (SC74R) SOT26 (SC74R) Dim Min Max Typ A1 0.013 0.10 0.05 A2 1.00 1.30 1.10 A3 0.70 0.80 0.75 b 0.35 0.50 0.38 c 0.10 0.20 0.15 D 2.90 3.10 3.00 e - - 0.95 e1 - - 1.90 E 2.70 3.00 2.80 E1 1.50 1.70 1.60 L 0.35 0.55 0.40 a - - 8° a1 - - 7° All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT26 (SC74R) Dimensions Value (in mm) C 2.40 C1 0.95 G 1.60 X 0.55 Y 0.80 Y1 3.20 D e E1 E b A2 A1 Seating Plane L c a Y1 G X Y C 74AVC1T45 Document number: DS38131 Rev. 2 – 2 11 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. SOT363 SOT363 Dim Min Max Typ A1 0.00 0.10 0.05 A2 0.90 1.00 0.95 b 0.10 0.30 0.25 c 0.10 0.22 0.11 D 1.80 2.20 2.15 E 2.00 2.20 2.10 E1 1.15 1.35 1.30 e 0.650 BSC F 0.40 0.45 0.425 L 0.25 0.40 0.30 a 0° 8° -- All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. SOT363 Dimensions Value (in mm) C 0.650 G 1.300 X 0.420 Y 0.600 Y1 2.500 e D L b E F c a Y1 G Y X C 74AVC1T45 Document number: DS38131 Rev. 2 – 2 12 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. X1-DFN1010-6 (Type B) X1-DFN1010-6 (Type B) Dim Min Max Typ A - 0.50 0.39 A1 - 0.04 - b 0.12 0.20 0.15 D 0.95 1.050 1.00 E 0.95 1.050 1.00 e 0.35 BSC e1 0.55 BSC L3 0.27 0.30 0.30 L3a 0.32 0.40 0.35 All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X1-DFN1010-6 (Type B) Dimensions Value (in mm) C 0.350 G 0.150 G1 0.150 X 0.200 X1 0.900 Y 0.500 Y1 0.525 Y2 0.475 Y3 1.150 A Seating Plane D E b e L3( 5x) ( Pin #1 ID) L3a Pin1 C Y( 4x) X G1G 74AVC1T45 Document number: DS38131 Rev. 2 – 2 13 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN0910-6 X2-DFN0910-6 Dim Min Max Typ A - 0.35 0.30 A1 0 0.03 0.02 b 0.10 0.20 0.15 D 0.85 0.95 0.90 E 0.95 1.05 1.00 e - - 0.30 K 0.20 - - K1 0.25 - - L 0.25 0.35 0.30 L1 0.30 0.40 0.35 Z - - 0.075 Z1 - - 0.075 All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN0910-6 Dimensions Value (in mm) G 0.100 G1 0.050 G2 0.150 X 0.150 X1 0.750 Y 0.525 Y1 0.475 Y2 1.150 A Seating Plane D E b e L K (Pin #1 ID) C0.5X45° Z Pin1 Y G2 X G 74AVC1T45 Document number: DS38131 Rev. 2 – 2 14 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1409-6 X2-DFN1409-6 Dim Min Max Typ A - 0.40 0.39 A1 0 0.05 0.02 A3 - - 0.13 Ø 0.20 0.30 0.25 D 1.35 1.45 1.40 E 0.85 0.95 0.90 e1 - - 0.50 e2 - - 0.50 Z1 - - 0.075 Z2 - - 0.075 All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1409-6 Dimensions Value (in mm) C 1.000 C1 0.500 D 0.300 G 0.200 G1 0.200 X 0.400 Y 0.150 D E A ( Pin #1 ID) Seating Plane Z1( 4x) Ø( 6x) Z2( 4x) Pin1 C Y X G D ( 6x) 74AVC1T45 Document number: DS38131 Rev. 2 – 2 15 of 17 www.diodes.com November 2018 © Diodes Incorporated

Package Outline Dimensions (All dimensions in mm.) Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1410-6 X2-DFN1410-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. X2-DFN1410-6 Dimension s Value (in mm) C 0.500 G 0.250 X 0.250 X1 1.250 Y 0.525 Y1 1.250 D E e L(6x) A (Pin #1 ID) Seating Plane Z(4x) b(6x) Z1(4x) Y XG C 74AVC1T45 Document number: DS38131 Rev. 2 – 2 16 of 17 www.diodes.com November 2018 © Diodes Incorporated

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the ex press written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety -critical, life support devices or systems, notwithstanding any devices - or systems -related information or support that may be provided by Diodes Incor porated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2018, Diodes Incorporated www.diodes.com 74AVC1T45 Document number: DS38131 Rev. 2 – 2 17 of 17 www.diodes.com November 2018 © Diodes Incorporated