74AUP1G04

Document overview

  • Manufacturer or author: Diodes Incorporated
  • PDF pages: 16

Technical content

Features

  • Advanced Ultra Low Power (AUP) CMOS
  • Supply Voltage Range from 0.8V to 3.6V
  • ±4 mA Output Drive at 3.0V
  • Low Static Power Consumption ICC < 0.9µA
  • Low Dynamic Power Consumption CPD = 6.1pF (Typical at 3.6V)
  • Schmitt Trigger Action at all inputs makes the cir cuit tolerant for slower input rise and fall time. The hysteresis is typically 250mV at VCC = 3.0V.
  • I OFF Supports Partial-Power-Down Mode Operation
  • ESD Protection Exceeds JESD 22 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101)
  • Latch-Up Exceeds 100mA per JESD 78, Class I
  • Leadless Packages Named per JESD30E
  • Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
  • Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments

Applications

  • Suited for Battery and Low Power Needs
  • Wide array of products such as: /square4 Tablets, E-readers /square4 Cell Phones, Personal Navigation / GPS /square4 MP3 Players ,Cameras, Video Recorders /square4 PCs, Ultrabooks, Notebooks, Netbooks, /square4 Computer Peripherals, Hard Drives, SSDs, CD/DVD RO Ms /square4 TVs, DVDs, DVRs, Set-Top Boxes Notes: 1. No purposely added lead. Fully EU Directi ve 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) complian t. 2. See http://www.diodes.com/quality/lead_free.htm l for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <9 00ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Document number: DS35147 Rev. 5 - 2 2 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04

Ordering Information

74 AUP 1G 04 XXX -7

Logic Device Function Package Packing 74 : Logic Prefix 04 : 1-Input SE : SOT353 -7 : 7” Tape & Reel AUP : 0.8 to 3.6 V Inverter / Buffer FS3 : X2 -DFN0808 -4 Logic Family FW5 : X1 -DFN1010 -6 1G : One Gate FW4 :X2 -DFN1010 -6 FX4 : X2 - DFN1409 -6 FZ4 : X2 - DFN1410 -6 Device Package Code Package (Notes 4 & 5) Package Size 7” Tape and Reel Quantity Part Number Suffix 74AUP1G04SE-7 SE SOT353 2.0mm x 2.0mm x 1.1mm 0.65 mm lead pitch 3,000/Tape & Reel -7 74AUP1G04FS3-7 FS3 X2-DFN0808-4 0.8mm x 0.8mm x 0.35mm 0.5 mm pad pitch (diamond) 5,000/Tape & Reel -7 74AUP1G04FW5-7 FW5 X1-DFN1010-6 1.0mm x 1.0mm x 0.5mm 0.35 mm pad pitch 5,000/Tape & Reel -7 74AUP1G04FW4-7 FW4 X2-DFN1010-6 1.0mm x 1.0mm x 0.4mm 0.35 mm pad pitch 5,000/Tape & Reel -7 74AUP1G04FX4-7 FX4 X2-DFN1409-6 Chip Scale Alternative 1.4mm x 0.9mm x 0.4mm 0.5 mm pad pitch 5,000/Tape & Reel -7 74AUP1G04FZ4-7 FZ4 X2-DFN1410-6 1.4mm x 1.0mm x 0.4mm 0.5 mm pad pitch 5,000/Tape & Reel -7 Notes: 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can b e found on our website at http://www.diodes.com/datasheets/ap0 2001.pdf. Pin Descriptions Pin Name Function NC No Connection A Data Input GND Ground Y Data Output VCC Supply Voltage Logic Diagram Function Table Inputs Output A Y H L L H 2 4 Y A

Document number: DS35147 Rev. 5 - 2 3 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Absolute Maximum Ratings (Notes 6 & 7) (@T A = +25° C, unless otherwise specified.) Symbol Parameter Rating Unit ESD HBM Human Body Model ESD Protection 2 kV ESD CDM Charged Device Model ESD Protection 1 kV VCC Supply Voltage Range -0.5 to +4.6 V VI Input Voltage Range -0.5 to +4.6 V Vo Voltage applied to output in high or low state -0.5 to V CC +0.5 V IIK Input Clamp Current V I <0 50 mA IOK Output Clamp Current (V O < 0 ) 50 mA IO Continuous Output Current (V O = 0 to V CC ) ±20 mA ICC Continuous Current Through V CC 50 mA IGND Continuous Current Through GND -50 mA TJ Operating Junction Temperature -40 to +150 ° C TSTG Storage Temperature -65 to +150 ° C Notes: 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conve rsely forcing the maximum current could cause a condition exceeding the maximum voltag e. The ratings of both current and voltage must be maintained within the controlled range. Recommended Operating Conditions (Note 8) (@T A = +25° C, unless otherwise specified.) Symbol Parameter Min Max Unit VCC Operating Voltage 0.8 3.6 V VI Input Voltage 0 3.6 V VO Output Voltage 0 VCC V IOH High-Level Output Current VCC = 0.8V — -20 µA VCC = 1.1V — -1.1 mA VCC = 1.4V — -1.7 VCC = 1.65V — -1.9 VCC = 2.3V — -3.1 VCC = 3.0V — -4 IOL Low-Level Output Current VCC = 0.8V — 20 µA VCC = 1.1V — 1.1 mA VCC = 1.4V — 1.7 VCC = 1.65V — 1.9 VCC = 2.3V — 3.1 VCC = 3.0V — 4 ∆t/ ∆V Input Transition Rise or Fall Rate VCC = 0.8V to 3.6V — 200 ns/V TA Operating Free-Air Temperature -40 +125 ° C Note: 8. Unused inputs should be held at V CC or Ground.

Document number: DS35147 Rev. 5 - 2 4 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04

Electrical Characteristics

Symbol Parameter Test Conditions VCC TA = +25° C T A = -40° C to +85° C Unit Min Max Min Max VIH High-Level Input Voltage — 0.8V to 1.65V 0.80 x VCC — 0.80 x VCC — V — 1.65V to 1.95V 0.65 x VCC — 0.65 x VCC — VIL Low-Level Input Voltage — 0.8V to 1.65V — 0.30 x VCC — 0.30 x VCC V — 1.65V to 1.95V — 0.35 x VCC — 0.35 x VCC VOH High-Level Output Voltage IOH = -20 µA 0.8V to 3.6V VCC – 0.1 — VCC – 0.1 — V IOH = -1.1mA 1.1V 0.75 x VCC — 0.7 x VCC — IOH = -2.7mA 3V 2.72 — 2.67 — VOL Low-Level Output Voltage IOL = 20 µA 0.8V to 3.6V — 0.1 — 0.1 V IOL = 1.1mA 1.1V — 0.3 x VCC — 0.3 x VCC IOL = 1.7mA 1.4V — 0.31 — 0.37 IOL = 1.9mA 1.65V — 0.31 — 0.35 IOL = 2.3mA 2.3V — 0.31 — 0.33 IOL = 3.1mA — 0.44 — 0.45 IOL = 2.7mA 3V — 0.31 — 0.33 IOL = 4mA — 0.44 — 0.45 II Input Current A or B Input VI = GND to 3.6V 0V to 3.6V — ± 0.1 — ± 0.5 µA IOFF Power Down Leakage Current VI or V O = 0V to 3.6V 0 — 0.2 — 0.6 µA ∆IOFF Delta Power Down Leakage Current VI or V O = 0V to 3.6V 0V to 0.2V — 0.2 — 0.6 µA ICC Supply Current VI = GND or V CC IO = 0 0.8V to 3.6V — 0.5 — 0.9 µA ∆ICC Additional Supply Current Input at V CC -0.6 3.3V — 40 — 50 µA

Document number: DS35147 Rev. 5 - 2 5 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Electrical Characteristics (continued) Symbol Parameter Test Conditions VCC TA = -40° C to +125° C Unit Min Max VIH High-Level Input Voltage — 0.8V to 1.65V 0.80 x VCC — V — 1.65V to 1.95V 0.70 x VCC — — 2.3V to 2.7V 1.6 — — 3.0V to 3.6V 2.0 — VIL Low-Level Input Voltage — 0.8V to 1.65V — 0.25 x VCC V — 1.65V to 1.95V — 0.30 x VCC — 2.3V to 2.7V — 0.7 — 3.0V to 3.6V — 0.9 VOH High-Level Output Voltage IOH = -20 µA 0.8V to 3.6V VCC – 0.11 — V IOH = -1.1mA 1.1V 0.6 x VCC — IOH = -1.7mA 1.4V 0.93 — IOH = -1.9mA 1.65V 1.17 — IOH = -2.3mA 2.3V 1.77 — IOH = -3.1mA 1.67 — IOH = -2.7mA 3V 2.40 — IOH = -4mA 2.30 — VOL Low-Level Output Voltage IOL = 20 µA 0.8V to 3.6V — 0.11 V IOL = 1.1mA 1.1V — 0.33 x VCC IOL = 1.7mA 1.4V — 0.41 IOL = 1.9mA 1.65V — 0.39 IOL = 2.3mA 2.3V — 0.36 IOL = 3.1mA — 0.50 IOL = 2.7mA 3V — 0.36 IOL = 4mA — 0.50 II Input Current A or B Input VI = GND to 3.6V 0V to 3.6V — ± 0.75 µA IOFF Power Down Leakage Current VI or V O = 0V to 3.6V 0V — ± 3.5 µA ∆IOFF Delta Power Down Leakage Current VI or V O = 0V to 3.6V 0V to 0.2V — ± 2.5 µA ICC Supply Current VI = GND or V CC , IO = 0 0.8V to 3.6V — 3.0 µA ∆ICC Additional Supply Current Input at V CC -0.6V Other Inputs at V CC or GND 3.3V — 75 µA

Document number: DS35147 Rev. 5 - 2 6 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Switching Characteristics CL = 5pF, See Figure 1 Parameter From Input TO OUTPUT VCC TA = +25° C T A = -40° C to +85° C T A = -40° C to +125° C Unit Min Typ Max Min Max Min Max tpd A or B Y ns C L = 10pF, See Figure 1 Parameter From Input To Output VCC TA = +25° C T A = -40° C to +85° C T A = -40° C to +125° C Unit Min Typ Max Min Max Min Max tpd A or B Y ns C L = 15pF, See Figure 1 Parameter From Input To Output VCC TA = +25° C T A = -40° C to +85° C T A = -40° C to +125° C Unit Min Typ Max Min Max Min Max tpd A or B Y ns C L = 30pF, See Figure 1 Parameter From Input To Output VCC TA = +25° C T A = -40° C to +85° C T A = -40° C to +125° C Unit Min Typ Max Min Max Min Max tpd A or B Y ns

Document number: DS35147 Rev. 5 - 2 7 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Operating and Package Characteristics (@T A = +25° C, unless otherwise specified.) Parameter Test Conditions VCC Typ Unit Cpd Power Dissipation Capacitance f = 1MHz No Load 0.8V 6.5 pF 1.2V ± 0.1V 6.3 1.5V ± 0.1V 6.3 1.8V ± 0.15V 6.2 2.5V ± 0.2V 6.2 3.3V ± 0.3V 6.1 Ci Input Capacitance Vi = V CC or GND 0V or 3.3V 1.5 pF θJA Thermal Resistance Junction-to-Ambient SOT353 (Note 9) — 371 ° C/W X2-DFN0808-4 — 430 X1-DFN1010-6 — 435 X2-DFN1010-6 — 445 X2-DFN1409-6 — 470 X2-DFN1410-6 — 460 θJC Thermal Resistance Junction-to-Case SOT353 (Note 9) — 143 ° C/W X2-DFN0808-4 — 240 X1-DFN1010-6 — 250 X2-DFN1010-6 — 250 X2-DFN1409-6 — 275 X2-DFN1410-6 — 265 Note: 9. Test condition for each of the six packag e types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.

Document number: DS35147 Rev. 5 - 2 8 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Parameter Measurement Information Vcc Inputs VM C L VI t r/t f 0.8V VCC ≤3ns VCC /2 5, 10, 15, 30pF 1.2V±0.1V VCC ≤3ns VCC /2 5, 10, 15, 30pF 1.5V±0.1V VCC ≤3ns VCC /2 5, 10, 15, 30pF 1.8V ±0.15V VCC ≤3ns VCC /2 5, 10, 15, 30pF 2.5V±0.2V VCC ≤3ns VCC /2 5, 10, 15, 30pF 3.3V±0.3V VCC ≤3ns VCC /2 5, 10, 15, 30pF Voltage Waveform Pulse Duration Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1 Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and t PHL are the same as t PD.

Document number: DS35147 Rev. 5 - 2 9 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Marking Information (1) SOT353 1 2 3 XX Y W X XX : Identification code W : Week : A~Z : 1~26 week; X : A~Z : Internal code (( ((Top View Top View Top View Top View) ) )) Y : Year 0~9 a~z : 27~52 week; z represents 52 and 53 week Part Number Package Identification Code 74AUP1G04SE SOT353 XK (2) X2-DFN0808-4, X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6 and X2-DFN1410-6 Y : Year : 0~9 (Top View) X : A~Z : Internal code Y W X XX XX : Identification Code W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week Part Number Package Identification Code 74AUP1G04FS3 X2-DFN0808-4 YK 74AUP1G04FW5 X1-DFN1010-6 Q4 74AUP1G04FW4 X2-DFN1010-6 XK 74AUP1G04FX4 X2-DFN1409-6 HC 74AUP1G04FZ4 X2-DFN1410-6 XK

Document number: DS35147 Rev. 5 - 2 10 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. SOT353 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 αα αα 0° 8° - All Dimensions in mm Dimensions Value (in mm) Z 2.5 G 1.3 X 0.42 Y 0.6 C1 1.9 C2 0.65 A M J LD B C H K F X Z Y C2 C2 G

Document number: DS35147 Rev. 5 - 2 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for k R0.05 TYP A A1 E D e D2 E2 Z b L Pin #1 ID X 3 Y X C Y 1 X 1 Y 2 11 of 16 www.diodes.com Package Outline Dimensions and Suggested Pad Layout Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. X2 -DFN0808 Dim Min A 0.25 A1 0 A3 - b 0.17 D 0.75 D2 0.15 E 0.75 E2 0.15 e - K 0.20 L 0.17 L1 0.02 Z - All Dimensions in mm A 3 Se ating P l ane Y 3 February 2015 © Diodes Incorporated 74AUP1G04 Layout DFN0808 -4 Max Typ 0.35 0.30 0.04 0.02 - 0.13 0.27 0.22 0.85 0.80 0.35 0.25 0.85 0.80 0.35 0.25 - 0.48 - - 0.27 0.22 0.12 0.07 - 0.05 All Dimensions in mm

Document number: DS35147 Rev. 5 - 2 12 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 X1-DFN1010-6 (Type B) Package Outline Dimensions an d Suggested Pad Layout Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. X1 -DFN1010 -6 (Type B) Dim Min Max Typ A - 0.50 0.39 A1 - 0.04 - b 0.12 0.20 0.15 D 0.95 1.050 1.00 E 0.95 1.050 1.00 e 0.35 BSC e1 0.55 BSC L3 0.27 0.30 0.30 L3a 0.32 0.40 0.35 All Dimensions in mm Dimensions Value (in mm) C 0.350 G 0.150 G1 0.150 X 0.200 X1 0.900 Y 0.500 Y1 0.525 Y2 0.475 Y3 1.150 A Seating Plane D E b e L3( 5x) (P in # 1 ID) L3a P in 1 Y 3 C Y( 4x) X G1 G

Document number: DS35147 Rev. 5 - 2 13 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. X2-DFN1010-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.14 0.20 0.17 b1 0.05 0.15 0.10 D 0.95 1.05 1.00 E 0.95 1.05 1.00 e –– –– 0.35 L 0.35 0.45 0.40 K 0.15 –– –– Z –– –– 0.065 All Dimensions in mm A A1 D E Z(4x) b(6x) e L(6x) K (Pin #1 ID) Dimensions Value (in mm) C 0.350 G 0.150 X 0.200 X1 0.900 Y 0.550 Y1 1.250 X(6x) Y (6x) G(4x) C

Document number: DS35147 Rev. 5 - 2 14 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. X2 -DFN1409 -6 Dim Min Max Typ A - 0.40 0.39 A1 0 0.05 0.02 A3 - - 0.13 Ø 0.20 0.30 0.25 D 1.35 1.45 1.40 E 0.85 0.95 0.90 e1 - - 0.50 e2 - - 0.50 Z1 - - 0.075 Z2 - - 0.075 All Dimensions in mm Dimensions Value (in mm) C 1.000 C1 0.500 D 0.300 G 0.200 G1 0.200 X 0.400 Y 0.150 D E A (P in # 1 I D ) Seat ing P la ne Z 1 ( 4 x) A 1 Ø (6x ) Z 2 ( 4x ) Pin1 C Y X G D (6x)

Document number: DS35147 Rev. 5 - 2 15 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. X2 -DFN1410 -6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm Dimensions Value (in mm) C 0.500 G 0.250 X 0.250 X1 1.250 Y 0.525 Y1 1.250 D E e L(6x) A (Pin #1 ID) Seating Plane Z(4x) b(6x) Z1(4x) Y(6x) X(6x) G(4x) C

Document number: DS35147 Rev. 5 - 2 16 of 16 www.diodes.com February 2015 © Diodes Incorporated 74AUP1G04 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTI ES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve th e right to make modifications, enhancements, improv ements, corrections or other changes without further notice to this document and any pro duct described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Cu stomer or user of this document or products describ ed herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporate d products for any unintended or unauthorized appli cation, Customers shall indemnify and hold Diodes Incorporated and its representatives ha rmless against all claims, damages, expenses, and a ttorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patent s pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be tran slated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not a uthorized for use as critical components in life su pport devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary ex pertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety- critical, life support devices or systems, notwiths tanding any devices- or systems-related information or support that may be provided by Diod es Incorporated. Further, Customers must fully ind emnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com