74AC00SCX

74AC00_V01 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

74AC00, 74ACT00 www.onsemi.com ABSOLUTE MAXIMUM RATINGS Symbol Parameter Rating VCC Supply Voltage −0.5 V to +7.0 V IIK DC Input Diode Current VI = −0.5 V −20 mA VI = VCC + 0.5 +20 mA VI DC Input Voltage −0.5 V to VCC + 0.5 V IOK DC Output Diode Current VO = −0.5 V −20 mA VO = VCC + 0.5 V +20 mA VO DC Output Voltage −0.5 V to VCC + 0.5 V IO DC Output Source or Sink Current /C017750mA ICC or IGND DC VCC or Ground Current per Output Pin /C017750mA TSTG Storage Temperature −65°C to +150°C TJ Junction Temperature 140°C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. RECOMMENDED OPERATING CONDITIONS Symbol Parameter Rating VCC Supply Voltage AC 2.0 V to 6.0 V ACT 4.5 V to 5.5 V VI Input Voltage 0 V to VCC VO Output Voltage 0 V to VCC TA Operating Temperature −40°C to +85°C ΔV / Δt Minimum Input Edge Rate, AC Devices: VIN from 30% to 70% of VCC, VCC @ 3.3 V, 4.5 V, 5.5 V 125 mV/ns ΔV / Δt Minimum Input Edge Rate, ACT Devices: VIN from 0.8 V to 2.0 V, VCC @ 4.5 V, 5.5 V 125 mV/ns Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability.

74AC00, 74ACT00 www.onsemi.com DC ELECTRICAL CHARACTERISTICS FOR AC Symbol Parameter VCC (V) Conditions TA = +25°C TA = −40°C to +85°C UnitTyp. Guaranteed Limits VIH Minimum HIGH Level Input Voltage 4.5 2.25 3.15 3.15 5.5 2.75 3.85 3.85 VIL Maximum LOW Level Input Voltage 4.5 2.25 1.35 1.35 5.5 2.75 1.65 1.65 VOH Minimum HIGH Level Output Voltage 3.0 IOUT = −50 /C0109A 2.99 2.9 2.9 V 4.5 4.49 4.4 4.4 5.5 5.49 5.4 −5.4 3.0 VIN = VIL or VIH, IOH = −12 mA − 2.56 2.46 4.5 VIN = VIL or VIH, IOH = −24 mA − 3.86 3.76

5.5 VIN = VIL or VIH,

IOH = −24 mA (Note 1) − 4.86 4.76 VOL Maximum LOW Level Output Voltage 3.0 IOUT = 50 /C0109A 0.002 0.1 0.1 V 4.5 0.001 0.1 0.1 5.5 0.001 0.1 0.1 3.0 VIN = VIL or VIH, IOL = 12 mA − 0.36 0.44 4.5 VIN = VIL or VIH, IOL = 24 mA − 0.36 0.44

5.5 VIN = VIL or VIH, IOL = 24 mA

(Note 1) − 0.36 0.44 IIN (Note 3) Maximum Input Leakage Current 5.5 VI = VCC, GND − ±0.1 ±1.0 /C0109A IOLD Minimum Dynamic Output Current (Note 2) 5.5 VOLD = 1.65 V Max. − − 75 mA IOHD 5.5 VOHD = 3.85 V Min. − − −75 mA ICC (Note 3) Maximum Quiescent Supply Current 5.5 VIN = VCC or GND − 2.0 20.0 /C0109A Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 1. All outputs loaded; thresholds on input associated with output under test. 2. Maximum test duration 2.0 ms, one output loaded at a time. 3. I IN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC.

74AC00, 74ACT00 www.onsemi.com DC ELECTRICAL CHARACTERISTICS FOR ACT Symbol Parameter VCC (V) Conditions TA = +25°C TA = −40°C to +85°C UnitTyp. Guaranteed Limits 5.5 1.5 2.0 2.0 5.5 1.5 0.8 0.8 VOH Minimum HIGH Level Output Voltage 4.5 IOUT = −50 /C0109A 4.49 4.4 4.4 V 5.5 5.49 5.4 5.4 4.5 VIN = VIL or VIH, IOH = −24 mA − 3.86 3.76

5.5 VIN = VIL or VIH, IOH = 24 mA

(Note 4) − 4.86 4.76 VOL Maximum LOW Level Output Voltage 4.5 IOUT = 50 /C0109A 0.001 0.1 0.1 V 5.5 0.001 0.1 0.1 4.5 VIN = VIL or VIH, IOL = 24 mA − 0.36 0.44

5.5 VIN = VIL or VIH, IOL= 24 mA

(Note 4) − 0.36 0.44 IIN Maximum Input Leakage Current 5.5 VI = VCC, GND − ±0.1 ±1.0 /C0109A ICCT Maximum ICC/Input 5.5 VI = VCC − 2.1 V 0.6 − 1.5 mA IOLD Minimum Dynamic Output Current (Note 5) 5.5 VOLD = 1.65 V Max. − − 75 mA IOHD 5.5 VOHD = 3.85 V Min. − − −75 mA ICC Maximum Quiescent Supply Current 5.5 VIN = VCC or GND − 2.0 20.0 /C0109A Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 4. All outputs loaded; thresholds on input associated with output under test. 5. Maximum test duration 2.0 ms, one output loaded at a time. AC ELECTRICAL CHARACTERISTICS FOR AC Symbol Parameter VCC (V) (Note 6) TA = +25°C CL = 50 pF TA = −40°C to +85°C CL = 50 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. AC ELECTRICAL CHARACTERISTICS FOR ACT Symbol Parameter VCC (V) (Note 7) TA = +25°C CL = 50 pF TA = −40°C to +85°C CL = 50 pF Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.

74AC00, 74ACT00 www.onsemi.com CAPATICANCE Symbol Parameter Conditions Typ. Unit CIN Input Capacitance VCC = OPEN 4.5 pF CPD Power Dissipation Capacitance VCC = 5.0 V 30.0 pF

ORDERING INFORMATION

Order Number Package Shipping (Qty / Packing)† 74AC00SCX SOIC−14 (Pb−Free/Halogen Free) 2500 / Tape & Reel 74ACT00MTCX TSSOP−14 WB (Pb−Free/Halogen Free) 2500 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13739GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SOIC14 © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

TSSOP−14 WB CASE 948G ISSUE C DATE 17 FEB 2016 SCALE 2:1 *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ /C0071”, may or may not be present. DIM MIN MAX MIN MAX INCHESMILLIMETERS A 4.90 5.10 0.193 0.200 B 4.30 4.50 0.169 0.177 D 0.05 0.15 0.002 0.006 F 0.50 0.75 0.020 0.030 G 0.65 BSC 0.026 BSC H 0.50 0.60 0.020 0.024 J 0.09 0.20 0.004 0.008 J1 0.09 0.16 0.004 0.006 K 0.19 0.30 0.007 0.012 K1 0.19 0.25 0.007 0.010 L 6.40 BSC 0.252 BSC M 0 8 0 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION A DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH OR GATE BURRS SHALL NOT EXCEED 0.15 (0.006) PER SIDE. 4. DIMENSION B DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. INTERLEAD FLASH OR PROTRUSION SHALL NOT EXCEED 0.25 (0.010) PER SIDE. 5. DIMENSION K DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.08 (0.003) TOTAL IN EXCESS OF THE K DIMENSION AT MAXIMUM MATERIAL CONDITION. 6. TERMINAL NUMBERS ARE SHOWN FOR REFERENCE ONLY. 7. DIMENSION A AND B ARE TO BE DETERMINED AT DATUM PLANE −W−. /C0095/C0095/C0095/C0095 SU0.15 (0.006) T 2X L/2 SUM0.10 (0.004) V ST L −U− SEATING PLANE 0.10 (0.004) −T− ÇÇÇ ÇÇÇ SECTION N−N DETAIL E J J1 K ÉÉÉ ÉÉÉ DETAIL E F M −W− 0.25 (0.010) 814 PIN 1 IDENT. HG A D C B SU0.15 (0.006) T −V− 14X REFK N N GENERIC MARKING DIAGRAM* XXXX XXXX ALYW/C0071 /C0071 A = Assembly Location L = Wafer Lot Y = Year W = Work Week /C0071 = Pb−Free Package 7.06 14X 0.36 14X 1.26 0.65 DIMENSIONS: MILLIMETERS PITCH SOLDERING FOOTPRINT (Note: Microdot may be in either location) MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98ASH70246ADOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1TSSOP−14 WB © Semiconductor Components Industries, LLC, 2019 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative