74AC00

MC74AC00 MOTOROLA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

/C0081/C0117/C0097/C0100 /C0050/C0262/C0073/C0110/C0112/C0117/C0116 /C0078/C0065/C0078/C0068 /C0071/C0097/C0116/C0101

• Outputs Source/Sink 24 mA
• ′ACT00 Has TTL Compatible Inputs 1314 12 11 10 9 8 21 3 4 5 6 7 GND VCC MAXIMUM RATINGS* Symbol Parameter Value Unit VCC DC Supply Voltage (Referenced to GND) –0.5 to +7.0 V Vin DC Input Voltage (Referenced to GND) –0.5 to VCC +0.5 V Vout DC Output Voltage (Referenced to GND) –0.5 to VCC +0.5 V Iin DC Input Current, per Pin ±20 mA Iout DC Output Sink/Source Current, per Pin ±50 mA ICC DC V CC or GND Current per Output Pin ±50 mA Tstg Storage Temperature –65 to +150 °C * Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. /C0077/C0067/C0055/C0052/C0065/C0067/C0048/C0048 /C0077/C0067/C0055/C0052/C0065/C0067/C0084/C0048/C0048 QUAD 2-INPUT NAND GATE N SUFFIX CASE 646-06 PLASTIC D SUFFIX CASE 751A-03 PLASTIC

RECOMMENDED OPERATING CONDITIONS Symbol Parameter Min Typ Max Unit VCC Supply Voltage ′AC 2.0 5.0 6.0 VVCC Supply Voltage ′ACT 4.5 5.0 5.5 V Vin, Vout DC Input Voltage, Output Voltage (Ref. to GND) 0 VCC V tr, tf Input Rise and Fall Time (Note 1) ′AC Devices except Schmitt Inputs VCC @ 3.0 V 150 tr, tf Input Rise and Fall Time (Note 1) ′AC Devices except Schmitt Inputs VCC @ 4.5 V 40 ns/Vr, tf ′AC Devices except Schmitt Inputs VCC @ 5.5 V 25 tr, tf Input Rise and Fall Time (Note 2) ′ACT Devices except Schmitt Inputs VCC @ 4.5 V 10 ns/Vtr, tf Input Rise and Fall Time (Note 2) ′ACT Devices except Schmitt Inputs VCC @ 5.5 V 8.0 ns/V TJ Junction Temperature (PDIP) 140 °C TA Operating Ambient T emperature Range –40 25 85 °C IOH Output Current — High –24 mA IOL Output Current — Low 24 mA 1. Vin from 30% to 70% VCC ; see individual Data Sheets for devices that differ from the typical input rise and fall times. 2. Vin from 0.8 V to 2.0 V; see individual Data Sheets for devices that differ from the typical input rise and fall times. DC CHARACTERISTICS Symbol Parameter VCC (V) 74AC 74AC Unit ConditionsSymbol Parameter VCC (V) TA = +25°C TA = –40°C to +85°C Unit Conditions Typ Guaranteed Limits VIH Minimum High Level Input Voltage 5.5 2.75 3.85 3.85 VIL Maximum Low Level Input Voltage 5.5 2.75 1.65 1.65 VOH Minimum High Level Output Voltage 3.0 2.99 2.9 2.9 IOUT = –50 µA Output Voltage 4.5 4.49 4.4 4.4 V 5.5 5.49 5.4 5.4 V *VIN = VIL or VIH 3.0 2.56 2.46 V –12 mA 4.5 3.86 3.76 V IOH –24 mA 5.5 4.86 4.76 –24 mA VOL Maximum Low Level Output Voltage 3.0 0.002 0.1 0.1 IOUT = 50 µA Output Voltage 4.5 0.001 0.1 0.1 V 5.5 0.001 0.1 0.1 V *VIN = VIL or VIH 3.0 0.36 0.44 V 12 mA 4.5 0.36 0.44 V IOL 24 mA 5.5 0.36 0.44 24 mA IIN Maximum Input IOLD †Minimum Dynamic Output Current 5.5 75 mA VOLD = 1.65 V Max IOHD Output Current 5.5 –75 mA VOHD = 3.85 V Min ICC Maximum Quiescent Supply Current 5.5 4.0 40 µA VIN = VCC or GNDSupply Current 5.5 4.0 40 µA VIN = VCC or GND * All outputs loaded; thresholds on input associated with output under test. †Maximum test duration 2.0 ms, one output loaded at a time. Note: IIN and ICC @ 3.0 V are guaranteed to be less than or equal to the respective limit @ 5.5 V VCC .

AC CHARACTERISTICS (For Figures and Waveforms — See Section 3) Symbol Parameter VCC * (V) 74AC 74AC Unit Fig. No.Symbol Parameter VCC * (V) TA = +25°C C L = 50 pF TA = –40°C to +85°C C L = 50 pF Unit Fig. No. Min Typ Max Min Max * Voltage Range 3.3 V is 3.3 V ±0.3 V. Voltage Range 5.0 V is 5.0 V ±0.5 V. DC CHARACTERISTICS Symbol Parameter VCC (V) 74ACT 74ACT Unit ConditionsSymbol Parameter VCC (V) TA = +25°C TA = –40°C to +85°C Unit Conditions Typ Guaranteed Limits VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage 4.5 4.49 4.4 4.4 V IOUT = –50 µA Output Voltage 5.5 5.49 5.4 5.4 V *VIN = VIL or VIH 4.5 3.86 3.76 V IOH –24 mA 5.5 4.86 4.76 IOH –24 mA VOL Maximum Low Level Output Voltage 4.5 0.001 0.1 0.1 V IOUT = 50 µA Output Voltage 5.5 0.001 0.1 0.1 V *VIN = VIL or VIH 4.5 0.36 0.44 V IOL 24 mA 5.5 0.36 0.44 IOL 24 mA IIN Maximum Input IOLD †Minimum Dynamic Output Current 5.5 75 mA VOLD = 1.65 V Max IOHD Output Current 5.5 –75 mA VOHD = 3.85 V Min ICC Maximum Quiescent Supply Current 5.5 4.0 40 µA VIN = VCC or GNDSupply Current 5.5 4.0 40 µA VIN = VCC or GND * All outputs loaded; thresholds on input associated with output under test. †Maximum test duration 2.0 ms, one output loaded at a time.

AC CHARACTERISTICS (For Figures and Waveforms — See Section 3) Symbol Parameter VCC * (V) 74ACT 74ACT Unit Fig. No.Symbol Parameter VCC * (V) TA = +25°C C L = 50 pF TA = –40°C to +85°C C L = 50 pF Unit Fig. No. Min Typ Max Min Max * Voltage Range 5.0 V is 5.0 V ±0.5 V. CAPACITANCE Symbol Parameter Value Typ Unit Test Conditions C IN Input Capacitance 4.5 pF VCC = 5.0 V C PD Power Dissipation Capacitance 30 pF VCC = 5.0 V

CASE 646–06 ISSUE L NOTES: 1. LEADS WITHIN 0.13 (0.005) RADIUS OF TRUE POSITION AT SEATING PLANE AT MAXIMUM MATERIAL CONDITION. 2. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 3. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 4. ROUNDED CORNERS OPTIONAL. 1 7 14 8 B A F H G D K C N L J M SEATING PLANE DIM MIN MAX MIN MAX MILLIMETERSINCHES A 0.715 0.770 18.16 19.56 B 0.240 0.260 6.10 6.60 C 0.145 0.185 3.69 4.69 D 0.015 0.021 0.38 0.53 F 0.040 0.070 1.02 1.78 G 0.100 BSC 2.54 BSC H 0.052 0.095 1.32 2.41 J 0.008 0.015 0.20 0.38 K 0.115 0.135 2.92 3.43 L 0.300 BSC 7.62 BSC M 0 10 0 10 N 0.015 0.039 0.39 1.01 /C0095 /C0095 /C0095 /C0095 D SUFFIX PLASTIC SOIC PACKAGE CASE 751A–03 ISSUE F NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. –A– –B– G P 7 PL 14 8 M0.25 (0.010) B M SBM0.25 (0.010) A ST –T– FR X 45 SEATING PLANE D 14 PL K C JM /C0095 DIM MIN MAX MIN MAX INCHESMILLIMETERS A 8.55 8.75 0.337 0.344 B 3.80 4.00 0.150 0.157 C 1.35 1.75 0.054 0.068 D 0.35 0.49 0.014 0.019 F 0.40 1.25 0.016 0.049 G 1.27 BSC 0.050 BSC J 0.19 0.25 0.008 0.009 K 0.10 0.25 0.004 0.009 M 0 7 0 7 P 5.80 6.20 0.228 0.244 R 0.25 0.50 0.010 0.019 /C0095 /C0095 /C0095 /C0095 How to reach us: USA/EUROPE : Motorola Literature Distribution; JAPAN : Nippon Motorola Ltd.; T atsumi–SPD–JLDC, T oshikatsu Otsuki, P .O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 T atsumi Koto–Ku, T okyo 135, Japan. 03–3521–8315 INTERNET : http://Design–NET .com 51 Ting Kok Road, T ai Po, N.T ., Hong Kong. 852–26629298 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. MC74AC00/D /C0042/C0077/C0067/C0055/C0052/C0065/C0067/C0048/C0048/C0047/C0068/C0042