742265

742265 KATHREIN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

Adjust. Electr. Downtilt set by hand or by optional RCU (Remote Control Unit) 936.3218/b Subject to alteration. Input 4 x 7-16 female (long neck) Connector position Bottom Adjustment 2x, Position bottom mechanism continuously adjustable Weight 22 kg Wind load Frontal: 340 N (at 150 km/h) Lateral: 280 N (at 150 km/h) Rearside: 640 N (at 150 km/h) Max. wind velocity 200 km/h Packing size 2215 x 302 x 192 mm Height/width/depth 1916 / 262 / 139 mm Mechanical specifications 824–960 –45° 824–960 +45° 7-16 7-16 1710–2180 –45° 7-16 1710–2180 +45° 7-16 Horizontal Pattern Vertical Pattern 0.5°–9.5° electrical downtilt 65°125° dB 10° dB Horizontal Pattern Vertical Pattern 0°–6° electrical downtilt 65°120° dB +45°/–45° Polarization dB +45°/–45° Polarization 1710–2180824–960 XX 65°65° 0°–6°0°–10° 824–960 1710–2180 742 265Type No. Frequency range 824–894 MHz 880–960 MHz 1710–1880 MHz 1850–1990 MHz 1920–2180 MHz Gain 2 x 15.5 dBi 2 x 16 dBi 2 x 17.8 dBi 2 x 18.2 dBi 2 x 18.3 dBi Horizontal Pattern: Half-power beam width 68° 65° 67° 65° 63° Front-to-back ratio (180°±30°) > 27 dB > 25 dB > 25 dB > 25 dB > 25 dB Cross polar ratio Typically: Typically: Typically: Typically: Typically: Maindirection 0° 20 dB 20 dB 16 dB 18 dB 18 dB Sector ±60° > 10 dB > 10 dB > 10 dB > 10 dB > 10 dB Vertical Pattern: Half-power beam width 10.5° 10° 5.2° 5.0° 4.9° Electrical tilt 0.5°–9.5° 0.5°–9.5° 0°–6° 0°–6° 0°–6° continuously adjustable Impedance 50 Ω 50 Ω 50 Ω 50 Ω 50 Ω Isolation: Intrasystem > 30 dB > 30 dB > 30 dB > 30 dB > 30 dB Isolation: Intersystem Typically: > 50 dB (824–960 // 1710–2180 MHz) Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier) < –150 dBc (2 x 43 dBm carrier) Max. power per input 500 W 250 W Total power 1000 W 500 W (at 50 °C ambient temperature) XXPol Panel 824–960/1710–2180 65°/65° 16/18.5dBi 0°–10°/0°–6°T 824–960 1710–2180 742 265 Page 1 of 4 Internet: http://www.kathrein.de

Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which includes the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid. 936.3218/b Subject to alteration. Material: Reflector screen: Weather-proof aluminum. Fiberglass housing: It covers totally the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is light grey. All screws and nuts: Stainless steel. Grounding: The metal parts of the antenna including the mounting kit are DC grounded. The inputs 824–960 MHz are also DC grounded. The inputs 1710–2180 MHz are coupled capacitively. Environmental conditions: Kathrein cellular antennas are designed to operate under the environ- mental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules. For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Accessories (order separately) 738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2 850 10002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 2 850 10003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 2 733 677 1 clamp Mast: 60 – 115 mm diameter 2.0 kg 2 733 678 1 clamp Mast: 115 – 210 mm diameter 2.6 kg 2 733 679 1 clamp Mast: 210 – 380 mm diameter 4.0 kg 2 733 680 1 clamp Mast: 380 – 521 mm diameter 5.3 kg 2 737 975 1 downtilt kit Downtilt angle: 0° – 11° 2.8 kg 1 Type No. Description Remarks Weight Units per approx. antenna Accessories General Information 1916 1967 2007 Adjustment mechanism with integrated scale 139 157 94.5 190 262 Bottom view (Dimensions refer to radome) Layout of interface 824–960 1710–2180 RCU 1710–2180 RCU 824–960 –45° –45° +45° +45° long neck35–42 Page 2 of 4 742 265 Internet: http://www.kathrein.de

936.3218/b Subject to alteration. 742 265 Page 3 of 4 Internet: http://www.kathrein.de Remove the protective cap. Set downtilt angle by rotating the adjustment wheel. 0° – max.° max.° – 0° Manual adjustment procedure: General Instructions for Adjustment Mechanism Description of the adjustment mechanism (protective cap removed): ➀ Adjustment wheel with twist-lock function. ➁ Downtilt spindle with integrated scale. ➀ Thread for fixing the protective cap or the RCU (Remote Control Unit). ➁ Gearwheel for RCU power drive. To set the downtilt angle exactly, you must look horizontally at the scale. The lower edge of the gear- wheel must be used for alignment. Optional: RCU (Remote Control Unit) for remote-controlled downtilt adjustment: For a description of RCU installation please refer to the respective data sheet. Screw on the protective cap again.

936.3218/b Subject to alteration. Page 4 of 4 742 265 Internet: http://www.kathrein.de General Instructions for Feederline Installation on XXPol Panels with four Connectors Please note: In order not to damage the interfaces, please make sure that only the right tools are used. Tighten the feederline connector interfaces solely by using a common torque-wrench with a suitable wrench width. Attachment of the feederline connector and RCU (optional): In order to protect the adjustment mechanism the protective caps have to be attached during feederline installation! Start with the rearside located interfaces. Place the connector carefully and fix the nut using a torque-wrench (according to the manufacturers guidelines). After feederline installation the optional remote control units (RCU) can be mounted. For a full description of RCU installation please refer to the respective data sheet. Description of bottom end caps: Layout of interface: – RF inputs / polarization – Adjustment mechanism – Frequency range 7-16 female (long neck) Ventilation hole Protective cap covering adjustment mechanism