739655 KATHREIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
739 655Type No. Panel Dual Polarization Half-power Beam Width 936.1529/f Subject to alteration. Input 2 x 7-16 female Connector position Bottom or top Weight 14 kg Wind load Frontal: 330 N (at 150 km/h) Lateral: 200 N (at 150 km/h) Rearside: 770 N (at 150 km/h) Max. wind velocity 200 km/h Packing size 2057 x 287 x 165 mm Height/width/depth 1936 / 262 / 116 mm Mechanical specifications Frequency range 870 – 960 MHz Polarization +45°, –45° Gain 2 x 15.5 dBi Half-power beam width Horizontal: 90° Copolar +45°/ –45° Vertical: 10° Sidelobe suppression for ≥ 15 dB first sidelobe above horizon Front-to-back ratio, copolar > 25 dB Isolation > 32 dB Impedance 50 Ω VSWR < 1.3 Intermodulation IM3 < –150 dBc (2 x 43 dBm carrier) Max. power per input 600 W (at 50 °C ambient temperature) XPol Panel 870–960 90° 15.5dBi Horizontal Pattern Vertical Pattern first null-fill below horizon better or equal –25 dB below maximum gain dB 90° 170° 10° dB +45°/–45° Polarization 870–960 X 90° * Inverted mounting: Connector position top: Change drain hole screw. 870–960 –45° 870–960 +45° 7-16 7-16 739 655 Page 1 of 2 Internet: http://www.kathrein.de
Please note: As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions. The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which includes the static mechanical load imposed on an antenna by wind at maximum velocity. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The installation team must be properly qualified and also be familiar with the relevant national safety regulations. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must be obeyed. Any previous datasheet issues have now become invalid. 936.1529/f Subject to alteration. Material: Reflector screen: Weather-proof aluminum. Fiberglass housing: It covers totally the internal antenna components. The special design reduces the sealing areas to a minimum and guarantees the best weather protection. Fiberglass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The colour of the radome is light grey. All screws and nuts: Stainless steel. Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. Environmental conditions: Kathrein cellular antennas are designed to operate under the environ- mental conditions as described in ETS 300 019-1-4 class 4.1 E. The antennas exceed this standard with regard to the following items: – Low temperature: –55 °C – High temperature (dry): +60 °C Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Kathrein antennas have passed environmental tests as recommended in ETS 300 019-2-4. The homogenous design of Kathrein’s antenna families use identical modules and materials. Extensive tests have been performed on typical samples and modules. For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Accessories (order separately) 731 651 1 clamp Mast: 28 – 64 mm diameter 330 g 2 738 546 1 clamp Mast: 50 – 115 mm diameter 1.0 kg 2 850 10002 1 clamp Mast: 110 – 220 mm diameter 2.7 kg 2 850 10003 1 clamp Mast: 210 – 380 mm diameter 4.8 kg 2 733 677 1 clamp Mast: 60 – 115 mm diameter 2.0 kg 2 733 678 1 clamp Mast: 115 – 210 mm diameter 2.6 kg 2 733 679 1 clamp Mast: 210 – 380 mm diameter 4.0 kg 2 733 680 1 clamp Mast: 380 – 521 mm diameter 5.3 kg 2 737 975 1 downtilt kit Downtilt angle: 0° – 11° 2.8 kg 1 Type No. Description Remarks Weight Units per approx. antenna -45° +45° 262 116 2030 1990 1936 Bottom view Accessories General Information Page 2 of 2 739 655 Internet: http://www.kathrein.de