80010761 KATHREIN | Alldatasheet
Document overview
- PDF pages: 2
Technical content
80010761 Page 1 of 2
936.4340/b Subject to alteration. Correlation Table Frequency range Array Connector 1710–2690 MHz Y1 1–2 2-Port Antenna 1710–2690 65° 12dBi 4°T Type No. 80010761 Highband Y1Y1 1710–2690 Frequency range MHz 1710 – 1990 1920 – 2200 2200 – 2490 2490 – 2690 Gain dBi 11 11.5 12.2 12.7 Horizontal Pattern: Half-power beam width ° 67 65 60 58 Front-to-back ratio, copolar dB > 30 > 28 > 28 > 27 Cross polar ratio Maindirection 0° Sector ±60° dB Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Typically: > 20 > 8 Vertical Pattern: Half-power beam width ° 36 31 25 25 Electrical tilt ° 3, fi xed 3, fi xed 4, fi xed 4, fi xed Impedance Ω 50 VSWR < 1.5 Isolation, between ports dB > 28 Intermodulation IM3 dBc < –150 (2 x 43 dBm carrier) Max. power per input W 150 (at 50 °C ambient temperature) Mechanical specifi cations Input 2 x 7-16 female Connector position Bottom Wind load (at Rated Wind Speed: 150 km/h) N | lbf Frontal: 55 | 12 Maximal: 55 | 12 Max. wind velocity km/h mph 200 124 Height/width/depth mm inches 278 / 154 / 69 10.9 / 6.1 / 2.7 Category of mounting hardware L (Light) Weight kg lb 1.8 (tension bands incl.) 4.0 (tension bands incl.) Packing size mm inches 375 x 172 x 92 14.8 x 6.8 x 39.1 Scope of supply Panel and 1 unit of tension bands for 45 – 125 mm | 1.8 – 4.9 inches diameter 2-Port Antenna Frequency Range Dual Polarization HPBW Fixed Electr. DT Y1Y1 1710–2690 X 65° Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com
936.4340/b Subject to alteration. Accessories General Information For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit. Wall mounting: No additional mounting kit needed. Please note: Using a downtilt kit is only possible in combination with clamps 731651, 738546 or 85010002 or 85010003. Material: Refl ector screen: Aluminum. Radiator: Tin-plated zinc. Flat fi berglass radome: The max. radome depth is only 69 mm. Fiber- glass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The color of the radome is grey. All nuts and bolts: Stainless steel. Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded. 278 | 10.9 322 | 12.7 352 | 13.9 1) 35 | 1.4 2) 64 | 2.5 3) 8.5 | 0.3 All dimensions in mm | inches Any previous data sheet issues have now become invalid. Accessories (order separately if required) Type No. Description Remarks mm | inches Weight approx. kg | lb Units per antenna 734360 2 tension bands Mast diameter: 34 – 60 | 1.3 – 2.4 0.06 | 0.13 1 734361 2 tension bands Mast diameter: 60 – 80 | 2.4 – 3.1 0.07 | 0.15 1 734362 2 tension bands Mast diameter: 80 – 100 | 3.1 – 3.9 0.08 | 0.18 1 734363 2 tension bands Mast diameter: 100 – 120 | 3.9 – 4.7 0.09 | 0.20 1 734364 2 tension bands Mast diameter: 120 – 140 | 4.7 – 5.5 0.11 | 0.24 1 738546 1 clamp Mast diameter: 42 – 115 | 1.7 – 4.5 1.1 | 2.4 2 731651 1 clamp Mast diameter: 28 – 60 | 1.1 – 2.4 0.8 | 1.8 2 85010002 1 clamp Mast diameter: 110 – 220 | 4.3 – 8.7 2.7 | 6.0 2 85010003 1 clamp Mast diameter: 210 – 380 | 8.3 – 15.0 4.8 | 10.6 2 732327 1 downtilt kit Downtilt angle: 0° – 36° 1.0 | 2.2 1 Accessories (included in the scope of supply) 734365 2 tension bands Mast diameter: 45 – 125 | 1.8 – 4.9 0.08 | 0.18 1 Layout of interface: 54 | 2.1 154 | 6.1 * Bottom view * Dimensions refer to radome All dimensions in mm | inches 69 | 2.7 * Kathrein USA Greenway Plaza II, 2400 Lakeside Blvd., Suite 650, Richardson TX 75082 All specifications are subject to change without notice. The latest specifications are available at www.kathreinusa.com